[PATCH RESEND 1/3] dt-bindings: clock: imx8mm: Add GPIO clocks

[PATCH RESEND 1/3] dt-bindings: clock: imx8mm: Add GPIO clocks

[Anson Huang]

Add macro for the GPIO clocks of the i.MX8MM.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
No change, just resend patch with correct encoding.
---
 include/dt-bindings/clock/imx8mm-clock.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h
index 1b4353e..fe47798 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -239,6 +239,12 @@
 
 #define IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK	222
 
-#define IMX8MM_CLK_END				223
+#define IMX8MM_CLK_GPIO1_ROOT			223
+#define IMX8MM_CLK_GPIO2_ROOT			224
+#define IMX8MM_CLK_GPIO3_ROOT			225
+#define IMX8MM_CLK_GPIO4_ROOT			226
+#define IMX8MM_CLK_GPIO5_ROOT			227
+
+#define IMX8MM_CLK_END				228
 
 #endif
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND 2/3] clk: imx8mm: add GPIO clocks to clock tree

[Anson Huang]

i.MX8MM has clock gate for each GPIO bank, add them
into clock tree for GPIO driver to manage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
No change, just resend patch with correct encoding.
---
 drivers/clk/imx/clk-imx8mm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 1ef8438..733ca20 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -590,6 +590,11 @@ static int __init imx8mm_clocks_init(struct device_node *ccm_node)
 	clks[IMX8MM_CLK_ECSPI2_ROOT] = imx_clk_gate4("ecspi2_root_clk", "ecspi2", base + 0x4080, 0);
 	clks[IMX8MM_CLK_ECSPI3_ROOT] = imx_clk_gate4("ecspi3_root_clk", "ecspi3", base + 0x4090, 0);
 	clks[IMX8MM_CLK_ENET1_ROOT] = imx_clk_gate4("enet1_root_clk", "enet_axi", base + 0x40a0, 0);
+	clks[IMX8MM_CLK_GPIO1_ROOT] = imx_clk_gate4("gpio1_root_clk", "ipg_root", base + 0x40b0, 0);
+	clks[IMX8MM_CLK_GPIO2_ROOT] = imx_clk_gate4("gpio2_root_clk", "ipg_root", base + 0x40c0, 0);
+	clks[IMX8MM_CLK_GPIO3_ROOT] = imx_clk_gate4("gpio3_root_clk", "ipg_root", base + 0x40d0, 0);
+	clks[IMX8MM_CLK_GPIO4_ROOT] = imx_clk_gate4("gpio4_root_clk", "ipg_root", base + 0x40e0, 0);
+	clks[IMX8MM_CLK_GPIO5_ROOT] = imx_clk_gate4("gpio5_root_clk", "ipg_root", base + 0x40f0, 0);
 	clks[IMX8MM_CLK_GPT1_ROOT] = imx_clk_gate4("gpt1_root_clk", "gpt1", base + 0x4100, 0);
 	clks[IMX8MM_CLK_I2C1_ROOT] = imx_clk_gate4("i2c1_root_clk", "i2c1", base + 0x4170, 0);
 	clks[IMX8MM_CLK_I2C2_ROOT] = imx_clk_gate4("i2c2_root_clk", "i2c2", base + 0x4180, 0);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND 3/3] arm64: dts: imx8mm: add clock for GPIO node

[Anson Huang]

i.MX8MM has clock gate for each GPIO bank, add clock info
to GPIO node for clock management.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
No change, just resend patch with correct encoding.
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 6b407a94..f32d4e9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -206,6 +206,7 @@
 				reg = <0x30200000 0x10000>;
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -217,6 +218,7 @@
 				reg = <0x30210000 0x10000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -228,6 +230,7 @@
 				reg = <0x30220000 0x10000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -239,6 +242,7 @@
 				reg = <0x30230000 0x10000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -250,6 +254,7 @@
 				reg = <0x30240000 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH RESEND 1/3] dt-bindings: clock: imx8mm: Add GPIO clocks

[Shawn Guo]

On Sun, May 12, 2019 at 10:17:08AM +0000, Anson Huang wrote:
> Add macro for the GPIO clocks of the i.MX8MM.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

Applied all, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel