From: Steve Capper <steve.capper@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: crecklin@redhat.com, ard.biesheuvel@linaro.org,
marc.zyngier@arm.com, catalin.marinas@arm.com,
bhsharma@redhat.com, will.deacon@arm.com
Subject: [PATCH v2 09/12] arm64: mm: Separate out vmemmap
Date: Tue, 28 May 2019 17:10:23 +0100 [thread overview]
Message-ID: <20190528161026.13193-10-steve.capper@arm.com> (raw)
In-Reply-To: <20190528161026.13193-1-steve.capper@arm.com>
vmemmap is a preprocessor definition that depends on a variable,
memstart_addr. In a later patch we will need to expand the size of
the VMEMMAP region and optionally modify vmemmap depending upon
whether or not hardware support is available for 52-bit virtual
addresses.
This patch changes vmemmap to be a variable. As the old definition
depended on a variable load, this should not affect performance
noticeably.
Signed-off-by: Steve Capper <steve.capper@arm.com>
---
arch/arm64/include/asm/pgtable.h | 4 ++--
arch/arm64/mm/init.c | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index d0ab784304e9..60c52c1da61a 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -34,8 +34,6 @@
#define VMALLOC_START (MODULES_END)
#define VMALLOC_END (- PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
-#define vmemmap ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
-
#define FIRST_USER_ADDRESS 0UL
#ifndef __ASSEMBLY__
@@ -46,6 +44,8 @@
#include <linux/mm_types.h>
#include <linux/sched.h>
+extern struct page *vmemmap;
+
extern void __pte_error(const char *file, int line, unsigned long val);
extern void __pmd_error(const char *file, int line, unsigned long val);
extern void __pud_error(const char *file, int line, unsigned long val);
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index d89341df2d0e..6844365c0a51 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -64,6 +64,9 @@ EXPORT_SYMBOL(memstart_addr);
s64 physvirt_offset __ro_after_init;
EXPORT_SYMBOL(physvirt_offset);
+struct page *vmemmap __ro_after_init;
+EXPORT_SYMBOL(vmemmap);
+
phys_addr_t arm64_dma_phys_limit __ro_after_init;
#ifdef CONFIG_KEXEC_CORE
@@ -330,6 +333,8 @@ void __init arm64_memblock_init(void)
physvirt_offset = PHYS_OFFSET - PAGE_OFFSET;
+ vmemmap = ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT));
+
/*
* Remove the memory that we will not be able to cover with the
* linear mapping. Take care not to clip the kernel which may be
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-28 16:13 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 16:10 [PATCH v2 00/12] 52-bit kernel + user VAs Steve Capper
2019-05-28 16:10 ` [PATCH v2 01/12] arm/arm64: KVM: Formalise end of direct linear map Steve Capper
2019-05-28 16:27 ` Marc Zyngier
2019-05-28 17:01 ` Steve Capper
2019-05-29 9:26 ` Steve Capper
2019-05-28 16:10 ` [PATCH v2 02/12] arm64: mm: Flip kernel VA space Steve Capper
2019-05-28 16:10 ` [PATCH v2 03/12] arm64: kasan: Switch to using KASAN_SHADOW_OFFSET Steve Capper
2019-05-28 16:10 ` [PATCH v2 04/12] arm64: mm: Replace fixed map BUILD_BUG_ON's with BUG_ON's Steve Capper
2019-05-28 17:07 ` Ard Biesheuvel
2019-05-28 17:11 ` Ard Biesheuvel
2019-05-29 9:28 ` Steve Capper
2019-05-28 16:10 ` [PATCH v2 05/12] arm64: dump: Make kernel page table dumper dynamic again Steve Capper
2019-05-28 16:10 ` [PATCH v2 06/12] arm64: mm: Introduce VA_BITS_MIN Steve Capper
2019-05-28 16:10 ` [PATCH v2 07/12] arm64: mm: Introduce VA_BITS_ACTUAL Steve Capper
2019-05-28 16:10 ` [PATCH v2 08/12] arm64: mm: Logic to make offset_ttbr1 conditional Steve Capper
2019-06-10 14:18 ` Catalin Marinas
2019-06-12 10:58 ` Steve Capper
2019-05-28 16:10 ` Steve Capper [this message]
2019-05-28 16:10 ` [PATCH v2 10/12] arm64: mm: Modify calculation of VMEMMAP_SIZE Steve Capper
2019-05-28 16:10 ` [PATCH v2 11/12] arm64: mm: Tweak PAGE_OFFSET logic Steve Capper
2019-05-28 16:10 ` [PATCH v2 12/12] arm64: mm: Introduce 52-bit Kernel VAs Steve Capper
2019-06-05 15:34 ` Catalin Marinas
2019-06-07 10:34 ` Steve Capper
2019-06-07 13:53 ` [PATCH v2 00/12] 52-bit kernel + user VAs Anshuman Khandual
2019-06-07 14:24 ` Steve Capper
2019-06-10 10:40 ` Bhupesh Sharma
2019-06-10 10:54 ` Catalin Marinas
2019-06-10 11:15 ` Bhupesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528161026.13193-10-steve.capper@arm.com \
--to=steve.capper@arm.com \
--cc=ard.biesheuvel@linaro.org \
--cc=bhsharma@redhat.com \
--cc=catalin.marinas@arm.com \
--cc=crecklin@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).