[PATCH 0/9] drm/sun4i: Allwinner R40 MIPI-DSI support

[PATCH 0/9] drm/sun4i: Allwinner R40 MIPI-DSI support

[Jagan Teki]

This is initial version for supporting MIPI-DSI on Allwinner R40.

The controller look similar like, Allwinnwe A64 so it has
dependencies with A64 MIPI DSI changes, DSI fixes and R40 pwm 
driver [1] [2] [3] 

PLL-MIPI, dclk divders logic bpp/lanes are properly work for R40,
like A31, A64.

patch 1, 2: TCON LCD support

patch 3, 4: Use clock index macros instead of numbers

patch 5: Add tcon top lcd clocking

patch 6, 7: Add dt-bindings for r40 dsi, dphy

patch 8: Add R40 MIPI DSI pipeline

patch 9: Overlay patch to test it on BPI-M2U

[1] https://patchwork.freedesktop.org/series/61310/
[2] https://patchwork.freedesktop.org/series/60847/ 
[3] https://lore.kernel.org/patchwork/cover/862766/ 

Jagan Teki (9):
  dt-bindings: display: Add TCON LCD compatible for R40
  drm/sun4i: tcon: Add TCON LCD support for R40
  ARM: dts: sun8i: r40: Use tcon top clock index macros
  drm/sun4i: tcon_top: Use clock name index macros
  ARM: dts: sun8i: r40: Add TCON TOP LCD clocking
  dt-bindings: sun6i-dsi: Add R40 MIPI-DSI compatible (w/ A64 fallback)
  dt-bindings: sun6i-dsi: Add R40 DPHY compatible (w/ A31 fallback)
  ARM: dts: sun8i: r40: Add MIPI DSI pipeline
  [DO NOT MERGE] ARM: dts: sun8i-r40: bananapi-m2-ultra: Enable Bananapi S070WV20-CT16 DSI panel

 .../bindings/display/sunxi/sun4i-drm.txt      |  1 +
 .../bindings/display/sunxi/sun6i-dsi.txt      |  2 +
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  | 36 ++++++++
 arch/arm/boot/dts/sun8i-r40.dtsi              | 84 +++++++++++++++++--
 drivers/gpu/drm/sun4i/sun4i_tcon.c            |  7 ++
 drivers/gpu/drm/sun4i/sun8i_tcon_top.c        | 13 +--
 include/dt-bindings/clock/sun8i-tcon-top.h    |  2 +-
 7 files changed, 134 insertions(+), 11 deletions(-)

-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/9] dt-bindings: display: Add TCON LCD compatible for R40

[Jagan Teki]

Like TCON TV0, TV1 allwinner R40 has TCON LCD0, LCD1 which
are managed via TCON TOP.

Add tcon lcd compatible R40, the same compatible can handle
TCON LCD0, LCD1.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 31ab72cba3d4..9e9c7f934202 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -160,6 +160,7 @@ Required properties:
    * allwinner,sun8i-a33-tcon
    * allwinner,sun8i-a83t-tcon-lcd
    * allwinner,sun8i-a83t-tcon-tv
+   * allwinner,sun8i-r40-tcon-lcd
    * allwinner,sun8i-r40-tcon-tv
    * allwinner,sun8i-v3s-tcon
    * allwinner,sun9i-a80-tcon-lcd
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] [PATCH 1/9] dt-bindings: display: Add TCON LCD compatible for R40

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> Like TCON TV0, TV1 allwinner R40 has TCON LCD0, LCD1 which
> are managed via TCON TOP.
>
> Add tcon lcd compatible R40, the same compatible can handle
> TCON LCD0, LCD1.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Acked-by: Chen-Yu Tsai <wens@csie.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/9] drm/sun4i: tcon: Add TCON LCD support for R40

[Jagan Teki]

TCON LCD0, LCD1 in allwinner R40, are used for managing
LCD interfaces like RGB, LVDS and DSI.

Like TCON TV0, TV1 these LCD0, LCD1 are also managed via
tcon top.

Add support for it, in tcon driver.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 9e9d08ee8387..8553066e7bed 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1471,6 +1471,12 @@ static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
 	.has_channel_1		= true,
 };
 
+static const struct sun4i_tcon_quirks sun8i_r40_lcd_quirks = {
+	.supports_lvds		= true,
+	.has_channel_0		= true,
+	.set_mux		= sun8i_r40_tcon_tv_set_mux,
+};
+
 static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = {
 	.has_channel_1		= true,
 	.set_mux		= sun8i_r40_tcon_tv_set_mux,
@@ -1501,6 +1507,7 @@ const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
 	{ .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks },
 	{ .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks },
+	{ .compatible = "allwinner,sun8i-r40-tcon-lcd", .data = &sun8i_r40_lcd_quirks },
 	{ .compatible = "allwinner,sun8i-r40-tcon-tv", .data = &sun8i_r40_tv_quirks },
 	{ .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
 	{ .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] [PATCH 2/9] drm/sun4i: tcon: Add TCON LCD support for R40

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> TCON LCD0, LCD1 in allwinner R40, are used for managing
> LCD interfaces like RGB, LVDS and DSI.
>
> Like TCON TV0, TV1 these LCD0, LCD1 are also managed via
> tcon top.
>
> Add support for it, in tcon driver.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] [PATCH 2/9] drm/sun4i: tcon: Add TCON LCD support for R40

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > TCON LCD0, LCD1 in allwinner R40, are used for managing
> > LCD interfaces like RGB, LVDS and DSI.
> >
> > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via
> > tcon top.
> >
> > Add support for it, in tcon driver.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>

I take that back.

The TCON output muxing (which selects whether TCON LCD or TCON TV
outputs to the GPIO pins)
is not supported yet. Please at least add TODO notes, or ideally,
block RGB output from
being used.

ChenYu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] [PATCH 2/9] drm/sun4i: tcon: Add TCON LCD support for R40

[Jagan Teki]

On Fri, Jun 14, 2019 at 9:05 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> > >
> > > TCON LCD0, LCD1 in allwinner R40, are used for managing
> > > LCD interfaces like RGB, LVDS and DSI.
> > >
> > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via
> > > tcon top.
> > >
> > > Add support for it, in tcon driver.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> >
> > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
>
> I take that back.
>
> The TCON output muxing (which selects whether TCON LCD or TCON TV
> outputs to the GPIO pins)
> is not supported yet. Please at least add TODO notes, or ideally,

Are you referring about port selection? it is support in
sun8i_tcon_top_de_config.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] [PATCH 2/9] drm/sun4i: tcon: Add TCON LCD support for R40

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 6:56 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Fri, Jun 14, 2019 at 9:05 AM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote:
> > >
> > > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> > > >
> > > > TCON LCD0, LCD1 in allwinner R40, are used for managing
> > > > LCD interfaces like RGB, LVDS and DSI.
> > > >
> > > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via
> > > > tcon top.
> > > >
> > > > Add support for it, in tcon driver.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > >
> > > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> >
> > I take that back.
> >
> > The TCON output muxing (which selects whether TCON LCD or TCON TV
> > outputs to the GPIO pins)
> > is not supported yet. Please at least add TODO notes, or ideally,
>
> Are you referring about port selection? it is support in
> sun8i_tcon_top_de_config.

No. That's supported as you already pointed out. That only selects
which mixer outputs to which TCON.

I'm talking about the GPIOD and GPIOH bits, which select which of
LCD or TV TCON outputs to the LCD function pins. Keep in mind that
the TV TCON's H/V SYNC signals are used in combination with the
TV encoder RGB outputs for VGA.

ChenYu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] [PATCH 2/9] drm/sun4i: tcon: Add TCON LCD support for R40

[Jagan Teki]

On Fri, Jun 14, 2019 at 4:32 PM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Fri, Jun 14, 2019 at 6:56 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > On Fri, Jun 14, 2019 at 9:05 AM Chen-Yu Tsai <wens@csie.org> wrote:
> > >
> > > On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote:
> > > >
> > > > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> > > > >
> > > > > TCON LCD0, LCD1 in allwinner R40, are used for managing
> > > > > LCD interfaces like RGB, LVDS and DSI.
> > > > >
> > > > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via
> > > > > tcon top.
> > > > >
> > > > > Add support for it, in tcon driver.
> > > > >
> > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > >
> > > > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > >
> > > I take that back.
> > >
> > > The TCON output muxing (which selects whether TCON LCD or TCON TV
> > > outputs to the GPIO pins)
> > > is not supported yet. Please at least add TODO notes, or ideally,
> >
> > Are you referring about port selection? it is support in
> > sun8i_tcon_top_de_config.
>
> No. That's supported as you already pointed out. That only selects
> which mixer outputs to which TCON.
>
> I'm talking about the GPIOD and GPIOH bits, which select which of
> LCD or TV TCON outputs to the LCD function pins. Keep in mind that
> the TV TCON's H/V SYNC signals are used in combination with the
> TV encoder RGB outputs for VGA.

Got it, so do I need to add TODO on sun8i_r40_lcd_quirks struct?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/9] ARM: dts: sun8i: r40: Use tcon top clock index macros

[Jagan Teki]

tcon_tv0, tcon_tv1 nodes have a clock names of tcon-ch0,
tcon-ch1 which are referring tcon_top clocks via index
numbers like 0, 1 with CLK_TCON_TV0 and CLK_TCON_TV1
respectively.

Use the macro in place of index numbers, for more code
readability.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index bb856e53b806..219d2dca16b3 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -44,6 +44,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 
@@ -704,7 +705,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV0>;
 			reset-names = "lcd";
@@ -747,7 +748,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c74000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV1>;
 			reset-names = "lcd";
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] ARM: dts: sun8i: r40: Use tcon top clock index macros

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 2:54 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> tcon_tv0, tcon_tv1 nodes have a clock names of tcon-ch0,
> tcon-ch1 which are referring tcon_top clocks via index
> numbers like 0, 1 with CLK_TCON_TV0 and CLK_TCON_TV1
> respectively.
>
> Use the macro in place of index numbers, for more code
> readability.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/9] drm/sun4i: tcon_top: Use clock name index macros

[Jagan Teki]

TCON TOP mux blocks in R40 are registering clock using
tcon top clock index numbers.

Right now the code is using, real numbers start with 0, but
we have proper macros that defined these name index numbers.

Use the existing macros, instead of real numbers for more
code readability.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
index 3267d0f9b9b2..465e9b0cdfee 100644
--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -194,19 +194,22 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
 	clk_data->hws[CLK_TCON_TOP_TV0] =
 		sun8i_tcon_top_register_gate(dev, "tcon-tv0", regs,
 					     &tcon_top->reg_lock,
-					     TCON_TOP_TCON_TV0_GATE, 0);
+					     TCON_TOP_TCON_TV0_GATE,
+					     CLK_TCON_TOP_TV0);
 
 	if (quirks->has_tcon_tv1)
 		clk_data->hws[CLK_TCON_TOP_TV1] =
 			sun8i_tcon_top_register_gate(dev, "tcon-tv1", regs,
 						     &tcon_top->reg_lock,
-						     TCON_TOP_TCON_TV1_GATE, 1);
+						     TCON_TOP_TCON_TV1_GATE,
+						     CLK_TCON_TOP_TV1);
 
 	if (quirks->has_dsi)
 		clk_data->hws[CLK_TCON_TOP_DSI] =
 			sun8i_tcon_top_register_gate(dev, "dsi", regs,
 						     &tcon_top->reg_lock,
-						     TCON_TOP_TCON_DSI_GATE, 2);
+						     TCON_TOP_TCON_DSI_GATE,
+						     CLK_TCON_TOP_DSI);
 
 	for (i = 0; i < CLK_NUM; i++)
 		if (IS_ERR(clk_data->hws[i])) {
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/9] drm/sun4i: tcon_top: Use clock name index macros

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 2:54 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> TCON TOP mux blocks in R40 are registering clock using
> tcon top clock index numbers.
>
> Right now the code is using, real numbers start with 0, but
> we have proper macros that defined these name index numbers.
>
> Use the existing macros, instead of real numbers for more
> code readability.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

However, you might want to rename the clock first, then switch to
using the index macros?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/9] ARM: dts: sun8i: r40: Add TCON TOP LCD clocking

[Jagan Teki]

According to Fig 7-2. TCON Top Block Diagram in User manual.

TCON TOP can have an hierarchy for TCON_LCD0, LCD1 like
TCON_TV0, TV1 so, the tcon top would handle the clocks of
TCON_LCD0, LCD1 similar like TV0, TV1.

But, the current tcon_top node is using dsi clock name with
CLK_DSI_DPHY which is ideally handle via dphy which indeed
a separate interface block.

So, use tcon-lcd0 instead of dsi which would refer the
CLK_TCON_LCD0 similar like CLK_TCON_TV0 with tcon-tv0.

This way we can refer CLK_TCON_LCD0 from tcon_top clock in
tcon_lcd0 node and the actual DSI_DPHY clock node would
refer in dphy node.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/sun8i-r40.dtsi           | 6 +++---
 drivers/gpu/drm/sun4i/sun8i_tcon_top.c     | 6 +++---
 include/dt-bindings/clock/sun8i-tcon-top.h | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 219d2dca16b3..12576536df4a 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -591,16 +591,16 @@
 				 <&ccu CLK_TVE0>,
 				 <&ccu CLK_TCON_TV1>,
 				 <&ccu CLK_TVE1>,
-				 <&ccu CLK_DSI_DPHY>;
+				 <&ccu CLK_TCON_LCD0>;
 			clock-names = "bus",
 				      "tcon-tv0",
 				      "tve0",
 				      "tcon-tv1",
 				      "tve1",
-				      "dsi";
+				      "tcon-lcd0";
 			clock-output-names = "tcon-top-tv0",
 					     "tcon-top-tv1",
-					     "tcon-top-dsi";
+					     "tcon-top-lcd0";
 			resets = <&ccu RST_BUS_TCON_TOP>;
 			#clock-cells = <1>;
 
diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
index 465e9b0cdfee..e23c19f18986 100644
--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -205,11 +205,11 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
 						     CLK_TCON_TOP_TV1);
 
 	if (quirks->has_dsi)
-		clk_data->hws[CLK_TCON_TOP_DSI] =
-			sun8i_tcon_top_register_gate(dev, "dsi", regs,
+		clk_data->hws[CLK_TCON_TOP_LCD0] =
+			sun8i_tcon_top_register_gate(dev, "tcon-lcd0", regs,
 						     &tcon_top->reg_lock,
 						     TCON_TOP_TCON_DSI_GATE,
-						     CLK_TCON_TOP_DSI);
+						     CLK_TCON_TOP_LCD0);
 
 	for (i = 0; i < CLK_NUM; i++)
 		if (IS_ERR(clk_data->hws[i])) {
diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h
index 25164d767835..88de3f2ba335 100644
--- a/include/dt-bindings/clock/sun8i-tcon-top.h
+++ b/include/dt-bindings/clock/sun8i-tcon-top.h
@@ -6,6 +6,6 @@
 
 #define CLK_TCON_TOP_TV0	0
 #define CLK_TCON_TOP_TV1	1
-#define CLK_TCON_TOP_DSI	2
+#define CLK_TCON_TOP_LCD0	2
 
 #endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: sun8i: r40: Add TCON TOP LCD clocking

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 2:54 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> According to Fig 7-2. TCON Top Block Diagram in User manual.
>
> TCON TOP can have an hierarchy for TCON_LCD0, LCD1 like
> TCON_TV0, TV1 so, the tcon top would handle the clocks of
> TCON_LCD0, LCD1 similar like TV0, TV1.

That is not guaranteed. The diagram shows the pixel data path,
not necessarily the clocks. In addition, the LCD TCONs have an
internal clock gate for the dot-clock output, which the TV variants
do not. That might explain the need for the gates in TCON TOP.

> But, the current tcon_top node is using dsi clock name with
> CLK_DSI_DPHY which is ideally handle via dphy which indeed
> a separate interface block.
>
> So, use tcon-lcd0 instead of dsi which would refer the
> CLK_TCON_LCD0 similar like CLK_TCON_TV0 with tcon-tv0.
>
> This way we can refer CLK_TCON_LCD0 from tcon_top clock in
> tcon_lcd0 node and the actual DSI_DPHY clock node would
> refer in dphy node.

That doesn't make sense. What about TCON_LCD1?

The CCU already has CLK_TCON_LCD0 and CLK_TCON_LCD1. What makes
you think that the TCONs don't use them directly?

Or maybe they do go through TCON_TOP, but there's no gate,
so we don't know about it.

You need to rethink this. What are you trying to deal with?

> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  arch/arm/boot/dts/sun8i-r40.dtsi           | 6 +++---
>  drivers/gpu/drm/sun4i/sun8i_tcon_top.c     | 6 +++---
>  include/dt-bindings/clock/sun8i-tcon-top.h | 2 +-

This is going to be a pain to merge.

First, you need to split the driver parts from the DT parts.

Second, you might need to revert CLK_DSI_DPHY back to a raw
number for now, so that when the patches get merged through
different trees, nothing breaks.

Third, you'll come back after everything is merged, and change
the raw number to the new macro.

ChenYu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: sun8i: r40: Add TCON TOP LCD clocking

[Jagan Teki]

On Fri, Jun 14, 2019 at 9:16 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Fri, Jun 14, 2019 at 2:54 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > According to Fig 7-2. TCON Top Block Diagram in User manual.
> >
> > TCON TOP can have an hierarchy for TCON_LCD0, LCD1 like
> > TCON_TV0, TV1 so, the tcon top would handle the clocks of
> > TCON_LCD0, LCD1 similar like TV0, TV1.
>
> That is not guaranteed. The diagram shows the pixel data path,
> not necessarily the clocks. In addition, the LCD TCONs have an
> internal clock gate for the dot-clock output, which the TV variants
> do not. That might explain the need for the gates in TCON TOP.

Correct, the actual idea about explanation here is to mention the
clocks definition in tcon top level and internal tv and lcd can handle
as you explained.

>
> > But, the current tcon_top node is using dsi clock name with
> > CLK_DSI_DPHY which is ideally handle via dphy which indeed
> > a separate interface block.
> >
> > So, use tcon-lcd0 instead of dsi which would refer the
> > CLK_TCON_LCD0 similar like CLK_TCON_TV0 with tcon-tv0.
> >
> > This way we can refer CLK_TCON_LCD0 from tcon_top clock in
> > tcon_lcd0 node and the actual DSI_DPHY clock node would
> > refer in dphy node.
>
> That doesn't make sense. What about TCON_LCD1?
>
> The CCU already has CLK_TCON_LCD0 and CLK_TCON_LCD1. What makes
> you think that the TCONs don't use them directly?
>
> Or maybe they do go through TCON_TOP, but there's no gate,
> so we don't know about it.
>
> You need to rethink this. What are you trying to deal with?

Yes, I understand what your asking for and indeed this is where I get
confused and tried this way initially and attach the dsi reference in
dphy something like

tcon_lcd0 {
                clocks = <&ccu CLK_BUS_TCON_LCD0>, <&ccu CLK_TCON_LCD0>;
                clock-names = "ahb", "tcon-ch0";
};

dphy {
               clocks = <&ccu CLK_BUS_MIPI_DSI>,
                              <&tcon_top CLK_TCON_TOP_DSI>;
               clock-names = "bus", "mod";
};

This would ended-up, phy wont getting the mod clock keep probing for
-EPROBE-DEFER since tcon top driver might not be loaded at the time
mipi driver. This way we have tv0, tv1 and dsi gates supported as
existed. Does it make sense?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: sun8i: r40: Add TCON TOP LCD clocking

[Chen-Yu Tsai]

On Fri, Jun 14, 2019 at 5:48 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Fri, Jun 14, 2019 at 9:16 AM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > On Fri, Jun 14, 2019 at 2:54 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> > >
> > > According to Fig 7-2. TCON Top Block Diagram in User manual.
> > >
> > > TCON TOP can have an hierarchy for TCON_LCD0, LCD1 like
> > > TCON_TV0, TV1 so, the tcon top would handle the clocks of
> > > TCON_LCD0, LCD1 similar like TV0, TV1.
> >
> > That is not guaranteed. The diagram shows the pixel data path,
> > not necessarily the clocks. In addition, the LCD TCONs have an
> > internal clock gate for the dot-clock output, which the TV variants
> > do not. That might explain the need for the gates in TCON TOP.
>
> Correct, the actual idea about explanation here is to mention the
> clocks definition in tcon top level and internal tv and lcd can handle
> as you explained.
>
> >
> > > But, the current tcon_top node is using dsi clock name with
> > > CLK_DSI_DPHY which is ideally handle via dphy which indeed
> > > a separate interface block.
> > >
> > > So, use tcon-lcd0 instead of dsi which would refer the
> > > CLK_TCON_LCD0 similar like CLK_TCON_TV0 with tcon-tv0.
> > >
> > > This way we can refer CLK_TCON_LCD0 from tcon_top clock in
> > > tcon_lcd0 node and the actual DSI_DPHY clock node would
> > > refer in dphy node.
> >
> > That doesn't make sense. What about TCON_LCD1?
> >
> > The CCU already has CLK_TCON_LCD0 and CLK_TCON_LCD1. What makes
> > you think that the TCONs don't use them directly?
> >
> > Or maybe they do go through TCON_TOP, but there's no gate,
> > so we don't know about it.
> >
> > You need to rethink this. What are you trying to deal with?
>
> Yes, I understand what your asking for and indeed this is where I get
> confused and tried this way initially and attach the dsi reference in
> dphy something like
>
> tcon_lcd0 {
>                 clocks = <&ccu CLK_BUS_TCON_LCD0>, <&ccu CLK_TCON_LCD0>;
>                 clock-names = "ahb", "tcon-ch0";
> };
>
> dphy {
>                clocks = <&ccu CLK_BUS_MIPI_DSI>,
>                               <&tcon_top CLK_TCON_TOP_DSI>;
>                clock-names = "bus", "mod";
> };
>
> This would ended-up, phy wont getting the mod clock keep probing for
> -EPROBE-DEFER since tcon top driver might not be loaded at the time
> mipi driver. This way we have tv0, tv1 and dsi gates supported as
> existed. Does it make sense?

Looks like that happens because the clocks are only registered at
the component bind phase, rather than the probe phase. And to bind
all the components, the DSI controller wants the DPHY available,
which isn't because it's still waiting for the clock.

So you could try moving the bits that register the clocks in the
TCON TOP driver to the probe function, and see if that solves
the circular dependency issue.

ChenYu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/9] dt-bindings: sun6i-dsi: Add R40 MIPI-DSI compatible (w/ A64 fallback)

[Jagan Teki]

The MIPI DSI controller on Allwinner R40 is similar on
the one on A64 like doesn't associate any DSI_SCLK gating.

So, add R40 compatible and append A64 compatible as fallback.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
index d0ce51fea103..438f1f999aeb 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
@@ -13,6 +13,7 @@ Required properties:
   - compatible: value must be one of:
     * allwinner,sun6i-a31-mipi-dsi
     * allwinner,sun50i-a64-mipi-dsi
+    * allwinner,sun8i-r40-mipi-dsi, allwinner,sun50i-a64-mipi-dsi
   - reg: base address and size of memory-mapped region
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the DSI encoder
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/9] dt-bindings: sun6i-dsi: Add R40 DPHY compatible (w/ A31 fallback)

[Jagan Teki]

The MIPI DSI PHY controller on Allwinner R40 is similar
on the one on A31.

Add R40 compatible and append A31 compatible as fallback.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
index 438f1f999aeb..b7ad1be33008 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
@@ -40,6 +40,7 @@ Required properties:
   - compatible: value must be one of:
     * allwinner,sun6i-a31-mipi-dphy
     * allwinner,sun50i-a64-mipi-dphy, allwinner,sun6i-a31-mipi-dphy
+    * allwinner,sun8i-r40-mipi-dphy, allwinner,sun6i-a31-mipi-dphy
   - reg: base address and size of memory-mapped region
   - clocks: phandles to the clocks feeding the DSI encoder
     * bus: the DSI interface clock
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 8/9] ARM: dts: sun8i: r40: Add MIPI DSI pipeline

[Jagan Teki]

Add MIPI DSI pipeline for Allwinner R40.

Unlike conventional Display pipeline in allwinner, R40 have
TCON TCOP which would interact various block like muxes,
tcon lcd, tcon_tv for better pipeline fitting.

For MIPI DSI pipeline, we have to configure the tcon_lcd0
block which would interact with tcon_top for upper pipeline
connections and dsi block for lower pipeline connections.

So, this patch created that pipeline by adding new nodes
for tcon_lcd0, dsi, dphy and connet them to make proper
pipeline fitting.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 73 ++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 12576536df4a..3ea2451151ff 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -623,6 +623,7 @@
 
 					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
 						reg = <0>;
+						remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>;
 					};
 
 					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
@@ -701,6 +702,45 @@
 			};
 		};
 
+		tcon_lcd0: lcd-controller@1c71000 {
+			compatible = "allwinner,sun8i-r40-tcon-lcd";
+			reg = <0x01c71000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_LCD0>, <&tcon_top CLK_TCON_TOP_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON_LCD0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_lcd0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_lcd0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>;
+					};
+				};
+
+				tcon_lcd0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_lcd0_out_dsi_out: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon_lcd0_out>;
+					};
+				};
+			};
+		};
+
 		tcon_tv0: lcd-controller@1c73000 {
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
@@ -798,6 +838,39 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun8i-r40-mipi-dsi",
+				     "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon_lcd0_out: endpoint {
+					remote-endpoint = <&tcon_lcd0_out_dsi_out>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun8i-r40-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun8i-r40-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[DO NOT MERGE] [PATCH 9/9] ARM: dts: sun8i-r40: bananapi-m2-ultra: Enable Bananapi S070WV20-CT16 DSI panel

[Jagan Teki]

This patch add support for Bananapi S070WV20-CT16 DSI panel to
BPI-M2U board.

DSI panel connected via board DSI port with,
- DCDC1 as VCC-DSI supply
- PH18 gpio for lcd enable pin
- PD17 gpio for lcd reset pin
- PD16 gpio for backlight enable pin

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c488aaacbd68..5f39317b783e 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -45,6 +45,7 @@
 #include "sun8i-r40.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Banana Pi BPI-M2-Ultra";
@@ -55,6 +56,14 @@
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PH16 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -117,6 +126,23 @@
 	status = "okay";
 };
 
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dcdc1>;		/* VCC-DSI */
+	status = "okay";
+
+	panel@0 {
+		compatible = "bananapi,s070wv20-ct16-icn6211";
+		reg = <0>;
+		enable-gpio = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* LCD-PWR-EN: PH18 */
+		reset-gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* LCD-RST: PH17 */
+		backlight = <&backlight>;
+	};
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -203,6 +229,12 @@
 	pinctrl-0 = <&clk_out_a_pin>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <2500000>;
@@ -290,6 +322,10 @@
 	regulator-name = "vdd1v2-sata";
 };
 
+&tcon_lcd0 {
+	status = "okay";
+};
+
 &tcon_tv0 {
 	status = "okay";
 };
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel