[PATCH 2/3] arm64 defconfig: enable MPT3 SAS and BNX2X drivers

Marcin Juszkiewicz
2019-06-17T16:04:46Z

ThunderX2 server requires both to provide storage and network.

05:00.0 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11)
05:00.1 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11)
8d:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01)

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 864800307e2f..a3b311ea3f13 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -215,6 +215,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
+CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_QCOM=m
@@ -244,6 +245,7 @@ CONFIG_VIRTIO_NET=y
CONFIG_AMD_XGBE=y
CONFIG_NET_XGENE=y
CONFIG_ATL1C=m
+CONFIG_BNX2X=m
CONFIG_MACB=y
CONFIG_THUNDER_NIC_PF=y
CONFIG_FEC=y