* [PATCH 4.9 037/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA
[not found] <20190620174351.964339809@linuxfoundation.org>
@ 2019-06-20 17:56 ` Greg Kroah-Hartman
2019-06-20 17:56 ` [PATCH 4.9 038/117] ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" " Greg Kroah-Hartman
` (3 subsequent siblings)
4 siblings, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2019-06-20 17:56 UTC (permalink / raw)
To: linux-kernel
Cc: Sasha Levin, Andrey Smirnov, Greg Kroah-Hartman,
Angus Ainslie (Purism), stable, linux-arm-kernel, Fabio Estevam,
Shawn Guo, Chris Healy, Lucas Stach
[ Upstream commit cc839d0f8c284fcb7591780b568f13415bbb737c ]
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6sl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 02378db3f5fc..a2c76797e871 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -704,7 +704,7 @@
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
- <&clks IMX6SL_CLK_SDMA>;
+ <&clks IMX6SL_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
/* imx6sl reuses imx6q sdma firmware */
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4.9 038/117] ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA
[not found] <20190620174351.964339809@linuxfoundation.org>
2019-06-20 17:56 ` [PATCH 4.9 037/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA Greg Kroah-Hartman
@ 2019-06-20 17:56 ` Greg Kroah-Hartman
2019-06-20 17:56 ` [PATCH 4.9 039/117] ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG " Greg Kroah-Hartman
` (2 subsequent siblings)
4 siblings, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2019-06-20 17:56 UTC (permalink / raw)
To: linux-kernel
Cc: Sasha Levin, Andrey Smirnov, Greg Kroah-Hartman,
Angus Ainslie (Purism), stable, linux-arm-kernel, Fabio Estevam,
Shawn Guo, Chris Healy, Lucas Stach
[ Upstream commit 412b032a1dc72fc9d1c258800355efa6671b6315 ]
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX7D_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX7D_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx7s.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 2b6cb05bc01a..edc5ddeb851a 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -962,8 +962,8 @@
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_SDMA_CORE_CLK>,
- <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_SDMA_CORE_CLK>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4.9 039/117] ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMA
[not found] <20190620174351.964339809@linuxfoundation.org>
2019-06-20 17:56 ` [PATCH 4.9 037/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA Greg Kroah-Hartman
2019-06-20 17:56 ` [PATCH 4.9 038/117] ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" " Greg Kroah-Hartman
@ 2019-06-20 17:56 ` Greg Kroah-Hartman
2019-06-20 17:56 ` [PATCH 4.9 040/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG " Greg Kroah-Hartman
2019-06-20 17:56 ` [PATCH 4.9 041/117] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG " Greg Kroah-Hartman
4 siblings, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2019-06-20 17:56 UTC (permalink / raw)
To: linux-kernel
Cc: Sasha Levin, Andrey Smirnov, Greg Kroah-Hartman,
Angus Ainslie (Purism), stable, linux-arm-kernel, Fabio Estevam,
Shawn Guo, Chris Healy, Lucas Stach
[ Upstream commit 7b3132ecefdd1fcdf6b86e62021d0e55ea8034db ]
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6UL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6UL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index c5c05fdccc78..7839300fe46b 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -669,7 +669,7 @@
"fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SDMA>,
+ clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4.9 040/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA
[not found] <20190620174351.964339809@linuxfoundation.org>
` (2 preceding siblings ...)
2019-06-20 17:56 ` [PATCH 4.9 039/117] ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG " Greg Kroah-Hartman
@ 2019-06-20 17:56 ` Greg Kroah-Hartman
2019-06-20 17:56 ` [PATCH 4.9 041/117] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG " Greg Kroah-Hartman
4 siblings, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2019-06-20 17:56 UTC (permalink / raw)
To: linux-kernel
Cc: Sasha Levin, Andrey Smirnov, Greg Kroah-Hartman,
Angus Ainslie (Purism), stable, linux-arm-kernel, Fabio Estevam,
Shawn Guo, Chris Healy, Lucas Stach
[ Upstream commit 8979117765c19edc3b01cc0ef853537bf93eea4b ]
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index a885052157f0..5834194b62e1 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -751,7 +751,7 @@
compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_SDMA>,
+ clocks = <&clks IMX6SX_CLK_IPG>,
<&clks IMX6SX_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4.9 041/117] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA
[not found] <20190620174351.964339809@linuxfoundation.org>
` (3 preceding siblings ...)
2019-06-20 17:56 ` [PATCH 4.9 040/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG " Greg Kroah-Hartman
@ 2019-06-20 17:56 ` Greg Kroah-Hartman
4 siblings, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2019-06-20 17:56 UTC (permalink / raw)
To: linux-kernel
Cc: Sasha Levin, Andrey Smirnov, Greg Kroah-Hartman,
Angus Ainslie (Purism), stable, linux-arm-kernel, Fabio Estevam,
Adam Ford, Shawn Guo, Chris Healy, Lucas Stach
[ Upstream commit b14c872eebc501b9640b04f4a152df51d6eaf2fc ]
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality(this at least
breaks RAVE SP serdev driver on RDU2). Fix the code to specify
IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect
clock ratio.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2db881..8ccafdfbe87c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -875,7 +875,7 @@
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_SDMA>,
+ clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread