linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH v3] ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family
Date: Mon, 24 Jun 2019 18:54:19 +0200	[thread overview]
Message-ID: <20190624165419.4704-1-krzk@kernel.org> (raw)

Add the PMIC regulator suspend configuration to entire Odroid
XU3/XU4/HC1 family of boards to reduce power usage during suspend.  The
configuration is based on vendor (Hardkernel) reference kernel with
additional buck9 suspend configuration (for USB hub suspend and proper
reset).

Energy consumption measurements from Marek Szyprowski during suspend to
RAM:
 - all at 5 V power supply,
 - before: next-20190620,
 - after: next-20190620 + this patch + suspend configuration for s2mps11
          regulator driver,

Board              | before [mA] | after [mA] |
Odroid HC1         |         120 |       7-10 |
Odroid XU4, sdcard |          88 |        6-9 |
Odroid XU4, eMMC   |         100 |        6-9 |

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>

---

Tested on XU3 and HC1 with SD card.

---

Changes since v2:
1. Suspend also buck9, as suggested by Anand.
2. Add Anand's tag.

Changes since v1:
1. Add Marek's tag.
---
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 96 +++++++++++++++++++
 1 file changed, 96 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 0f967259ad29..9843d21d6924 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -177,6 +177,10 @@
 				regulator-name = "vdd_adc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo5_reg: LDO5 {
@@ -184,6 +188,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo6_reg: LDO6 {
@@ -191,6 +199,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo7_reg: LDO7 {
@@ -198,6 +210,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo8_reg: LDO8 {
@@ -205,6 +221,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo9_reg: LDO9 {
@@ -212,6 +232,10 @@
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo10_reg: LDO10 {
@@ -219,6 +243,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo11_reg: LDO11 {
@@ -226,6 +254,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo12_reg: LDO12 {
@@ -239,6 +271,10 @@
 				regulator-name = "vddq_mmc2";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo14_reg: LDO14 {
@@ -253,6 +289,10 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo16_reg: LDO16 {
@@ -267,18 +307,30 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo18_reg: LDO18 {
 				regulator-name = "vdd_emmc_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo19_reg: LDO19 {
 				regulator-name = "vdd_sd";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo20_reg: LDO20 {
@@ -307,6 +359,10 @@
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo24_reg: LDO24 {
@@ -328,6 +384,10 @@
 				regulator-name = "vdd_ldo26";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo27_reg: LDO27 {
@@ -335,6 +395,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo28_reg: LDO28 {
@@ -342,6 +406,10 @@
 				regulator-name = "vdd_ldo28";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo29_reg: LDO29 {
@@ -420,6 +488,10 @@
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
 				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck2_reg: BUCK2 {
@@ -428,6 +500,10 @@
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck3_reg: BUCK3 {
@@ -436,6 +512,10 @@
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck4_reg: BUCK4 {
@@ -444,6 +524,10 @@
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck5_reg: BUCK5 {
@@ -460,6 +544,10 @@
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck7_reg: BUCK7 {
@@ -484,12 +572,20 @@
 				regulator-max-microvolt = <3750000>;
 				regulator-always-on;
 				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck10_reg: BUCK10 {
 				regulator-name = "vdd_vmem";
 				regulator-min-microvolt = <2850000>;
 				regulator-max-microvolt = <2850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 		};
 	};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

                 reply	other threads:[~2019-06-24 16:54 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190624165419.4704-1-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).