From: Shawn Guo <shawnguo@kernel.org>
To: arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Stefan Agner <stefan@agner.ch>,
Li Yang <leoyang.li@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 5/7] i.MX arm32 DT changes for 5.3
Date: Tue, 25 Jun 2019 15:53:03 +0800 [thread overview]
Message-ID: <20190625075305.29082-5-shawnguo@kernel.org> (raw)
In-Reply-To: <20190625075305.29082-1-shawnguo@kernel.org>
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.3
for you to fetch changes up to 48cbd9ff53b7391111e8460c3d9307ba14a5f8c0:
ARM: dts: imx7ulp-evk: enable USBOTG1 support (2019-06-24 23:12:18 +0800)
----------------------------------------------------------------
i.MX arm32 DT changes for 5.3:
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
Meerkat96 board, and NXP LS1021A-TSN board.
- A series from Andrey Smirnov to update vf610-zii-dev and
imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
adding QSPI device, and dropping unused pinmux.
- Update imx6sl and imx6qdl device tree to assign corresponding clocks
instead of dummy clock.
- Update i.MX6/7 boards from NXP to assign corresponding power supply
for LDOs.
- Update i.MX6/7 device trees to enable SNVS poweroff key support
according to board design.
- Update coresight DT binding for i.MX7 according to consolidations
for CoreSight replicator and funnel.
- A series from Marek Vasut to update M53Menlo board on various devices
like UART, USB, ethernet PHY, GPIOs etc.
- Enable USBOTG support for imx7ulp and evk board.
- A series from Peter Robinson to update imx6sx-udoo board, switching
to SPDX License Identifier, enabling I2C devices and bluetooth
support.
- Add video capture support for i.MX53 and imx53-smd board.
- Add PXP device for i.MX6UL.
- Other random small updates on various boards.
----------------------------------------------------------------
Andrey Smirnov (4):
ARM: dts: vf610-zii-dev: Fix incorrect UART2 pin assignment
ARM: dts: vf610-zii-dev: Add QSPI node
ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
Anson Huang (17):
ARM: dts: imx6sl: Assign corresponding clocks instead of dummy clock
ARM: dts: imx6qdl: Assign corresponding clocks instead of dummy clock
ARM: dts: imx7ulp: Add tpm pwm support
ARM: dts: imx7ulp-evk: Add backlight support
ARM: dts: imx6ul: add clock-frequency to CPU node
ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs
ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs
ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs
ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0
ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs
ARM: dts: imx7d-sdb: Make SW2's voltage fixed
ARM: dts: imx6qdl: Enable SNVS power key according to board design
ARM: dts: imx6sx: Enable SNVS power key according to board design
ARM: dts: imx6ul: Enable SNVS power key according to board design
ARM: dts: imx6sll: Enable SNVS power key according to board design
ARM: dts: imx7s: Enable SNVS power key according to board design
ARM: dts: imx6sll: Enable SNVS poweroff according to board design
Igor Opaniuk (1):
ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
Leo Yan (1):
ARM: dts: imx7s: Update coresight DT bindings
Leonard Crestez (1):
ARM: dts: imx7d: Update cpufreq OPP table
Manivannan Sadhasivam (1):
ARM: dts: Add support for 96Boards Meerkat96 board
Marek Vasut (9):
ARM: dts: imx53: Update UART configuration on M53Menlo
ARM: dts: imx53: Update USB configuration on M53Menlo
ARM: dts: imx53: Add ethernet PHY reset on M53Menlo
ARM: dts: imx53: Select netdev trigger for Yellow LED on M53Menlo
ARM: dts: imx53: Add power GPIOs on M53Menlo
ARM: dts: imx53: Add GPIO beeper on M53Menlo
ARM: dts: imx53: Add GPIO line names on M53Menlo
ARM: dts: imx53: Update pinmux settings on M53Menlo
ARM: dts: imx53: Bind CPLD on M53Menlo
Michael Grzeschik (1):
ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
Peter Chen (2):
ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
ARM: dts: imx7ulp-evk: enable USBOTG1 support
Peter Robinson (3):
ARM: dts: imx6sx-udoo: Use the correct style for SPDX License Identifier
ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
Priit Laes (1):
ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
Rob Herring (1):
ARM: dts: imx: Avoid colliding 'display' node and property names
Steve Longerbeam (2):
ARM: dts: imx53: Add capture-subsystem device
ARM: dts: imx53-smd: Add OV5642 video capture support
Sébastien Szymanski (1):
ARM: dts: imx6ul: Add PXP node
Vladimir Oltean (1):
ARM: dts: Introduce the NXP LS1021A-TSN board
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx53-m53menlo.dts | 266 ++++++--
arch/arm/boot/dts/imx53-smd.dts | 73 +++
arch/arm/boot/dts/imx53.dtsi | 12 +
arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi | 12 +
arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi | 36 ++
arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 815 +++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 16 +
arch/arm/boot/dts/imx6qdl.dtsi | 11 +-
arch/arm/boot/dts/imx6sl-evk.dts | 12 +
arch/arm/boot/dts/imx6sl.dtsi | 12 +-
arch/arm/boot/dts/imx6sll-evk.dts | 12 +
arch/arm/boot/dts/imx6sll.dtsi | 2 +
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 16 +
arch/arm/boot/dts/imx6sx-sdb.dts | 16 +
arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 39 +-
arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 47 +-
arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 47 +-
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 89 ++-
arch/arm/boot/dts/imx6sx.dtsi | 7 +-
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 +
arch/arm/boot/dts/imx6ul-geam.dts | 2 +-
arch/arm/boot/dts/imx6ul-isiot.dtsi | 2 +-
arch/arm/boot/dts/imx6ul.dtsi | 14 +
arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 11 +-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 6 +
arch/arm/boot/dts/imx6ull.dtsi | 7 +
arch/arm/boot/dts/imx7d-meerkat96.dts | 375 ++++++++++++
arch/arm/boot/dts/imx7d-sdb.dts | 16 +-
arch/arm/boot/dts/imx7d-zii-rpu2.dts | 16 +-
arch/arm/boot/dts/imx7d.dtsi | 16 +-
arch/arm/boot/dts/imx7s.dtsi | 11 +-
arch/arm/boot/dts/imx7ulp-evk.dts | 55 ++
arch/arm/boot/dts/imx7ulp.dtsi | 38 ++
arch/arm/boot/dts/ls1021a-tsn.dts | 289 +++++++++
arch/arm/boot/dts/vf610-zii-dev.dtsi | 52 +-
36 files changed, 2198 insertions(+), 258 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts
create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-25 7:54 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-25 7:52 [GIT PULL 1/7] i.MX drivers change for 5.3 Shawn Guo
2019-06-25 7:53 ` [GIT PULL 2/7] i.MX SoC changes " Shawn Guo
2019-06-25 12:52 ` Olof Johansson
2019-06-25 7:53 ` [GIT PULL 3/7] i.MX DT bindings update " Shawn Guo
2019-06-25 11:51 ` Olof Johansson
2019-06-25 7:53 ` [GIT PULL 4/7] i.MX DT changes with new clock " Shawn Guo
2019-06-25 11:52 ` Olof Johansson
2019-06-25 7:53 ` Shawn Guo [this message]
2019-06-25 11:52 ` [GIT PULL 5/7] i.MX arm32 DT changes " Olof Johansson
2019-06-25 7:53 ` [GIT PULL 6/7] i.MX arm64 " Shawn Guo
2019-06-25 11:53 ` Olof Johansson
2019-06-25 7:53 ` [GIT PULL 7/7] i.MX defconfig " Shawn Guo
2019-06-25 12:32 ` Olof Johansson
2019-06-26 2:02 ` Shawn Guo
2019-06-27 2:14 ` Olof Johansson
2019-06-27 13:25 ` Shawn Guo
2019-06-25 12:45 ` [GIT PULL 1/7] i.MX drivers change " Olof Johansson
2019-06-26 1:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190625075305.29082-5-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).