From: Nishka Dasgupta <nishkadg.linux@gmail.com>
To: eric@anholt.net, wahrenst@gmx.net, gregkh@linuxfoundation.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devel@driverdev.osuosl.org
Cc: Nishka Dasgupta <nishkadg.linux@gmail.com>
Subject: [PATCH 3/9] staging: vc04_services: Remove vchiq_arm_force_suspend()
Date: Tue, 25 Jun 2019 23:47:03 +0530 [thread overview]
Message-ID: <20190625181710.2267-3-nishkadg.linux@gmail.com> (raw)
In-Reply-To: <20190625181710.2267-1-nishkadg.linux@gmail.com>
Remove unused function vchiq_arm_force_suspend.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
---
.../interface/vchiq_arm/vchiq_arm.c | 120 ------------------
.../interface/vchiq_arm/vchiq_arm.h | 3 -
2 files changed, 123 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index bf7c1e2bce67..6e59470d44ab 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -2741,126 +2741,6 @@ output_timeout_error(struct vchiq_state *state)
}
-/* Try to get videocore into suspended state, regardless of autosuspend state.
-** We don't actually force suspend, since videocore may get into a bad state
-** if we force suspend at a bad time. Instead, we wait for autosuspend to
-** determine a good point to suspend. If this doesn't happen within 100ms we
-** report failure.
-**
-** Returns VCHIQ_SUCCESS if videocore suspended successfully, VCHIQ_RETRY if
-** videocore failed to suspend in time or VCHIQ_ERROR if interrupted.
-*/
-VCHIQ_STATUS_T
-vchiq_arm_force_suspend(struct vchiq_state *state)
-{
- struct vchiq_arm_state *arm_state = vchiq_platform_get_arm_state(state);
- VCHIQ_STATUS_T status = VCHIQ_ERROR;
- long rc = 0;
- int repeat = -1;
-
- if (!arm_state)
- goto out;
-
- vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
-
- write_lock_bh(&arm_state->susp_res_lock);
-
- status = block_resume(arm_state);
- if (status != VCHIQ_SUCCESS)
- goto unlock;
- if (arm_state->vc_suspend_state == VC_SUSPEND_SUSPENDED) {
- /* Already suspended - just block resume and exit */
- vchiq_log_info(vchiq_susp_log_level, "%s already suspended",
- __func__);
- status = VCHIQ_SUCCESS;
- goto unlock;
- } else if (arm_state->vc_suspend_state <= VC_SUSPEND_IDLE) {
- /* initiate suspend immediately in the case that we're waiting
- * for the timeout */
- stop_suspend_timer(arm_state);
- if (!vchiq_videocore_wanted(state)) {
- vchiq_log_info(vchiq_susp_log_level, "%s videocore "
- "idle, initiating suspend", __func__);
- status = vchiq_arm_vcsuspend(state);
- } else if (arm_state->autosuspend_override <
- FORCE_SUSPEND_FAIL_MAX) {
- vchiq_log_info(vchiq_susp_log_level, "%s letting "
- "videocore go idle", __func__);
- status = VCHIQ_SUCCESS;
- } else {
- vchiq_log_warning(vchiq_susp_log_level, "%s failed too "
- "many times - attempting suspend", __func__);
- status = vchiq_arm_vcsuspend(state);
- }
- } else {
- vchiq_log_info(vchiq_susp_log_level, "%s videocore suspend "
- "in progress - wait for completion", __func__);
- status = VCHIQ_SUCCESS;
- }
-
- /* Wait for suspend to happen due to system idle (not forced..) */
- if (status != VCHIQ_SUCCESS)
- goto unblock_resume;
-
- do {
- write_unlock_bh(&arm_state->susp_res_lock);
-
- rc = wait_for_completion_interruptible_timeout(
- &arm_state->vc_suspend_complete,
- msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS));
-
- write_lock_bh(&arm_state->susp_res_lock);
- if (rc < 0) {
- vchiq_log_warning(vchiq_susp_log_level, "%s "
- "interrupted waiting for suspend", __func__);
- status = VCHIQ_ERROR;
- goto unblock_resume;
- } else if (rc == 0) {
- if (arm_state->vc_suspend_state > VC_SUSPEND_IDLE) {
- /* Repeat timeout once if in progress */
- if (repeat < 0) {
- repeat = 1;
- continue;
- }
- }
- arm_state->autosuspend_override++;
- output_timeout_error(state);
-
- status = VCHIQ_RETRY;
- goto unblock_resume;
- }
- } while (0 < (repeat--));
-
- /* Check and report state in case we need to abort ARM suspend */
- if (arm_state->vc_suspend_state != VC_SUSPEND_SUSPENDED) {
- status = VCHIQ_RETRY;
- vchiq_log_error(vchiq_susp_log_level,
- "%s videocore suspend failed (state %s)", __func__,
- suspend_state_names[arm_state->vc_suspend_state +
- VC_SUSPEND_NUM_OFFSET]);
- /* Reset the state only if it's still in an error state.
- * Something could have already initiated another suspend. */
- if (arm_state->vc_suspend_state < VC_SUSPEND_IDLE)
- set_suspend_state(arm_state, VC_SUSPEND_IDLE);
-
- goto unblock_resume;
- }
-
- /* successfully suspended - unlock and exit */
- goto unlock;
-
-unblock_resume:
- /* all error states need to unblock resume before exit */
- unblock_resume(arm_state);
-
-unlock:
- write_unlock_bh(&arm_state->susp_res_lock);
-
-out:
- vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, status);
- return status;
-}
-
void
vchiq_check_suspend(struct vchiq_state *state)
{
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h
index 61b15278c999..b424323e9613 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h
@@ -112,9 +112,6 @@ vchiq_get_state(void);
extern VCHIQ_STATUS_T
vchiq_arm_vcsuspend(struct vchiq_state *state);
-extern VCHIQ_STATUS_T
-vchiq_arm_force_suspend(struct vchiq_state *state);
-
extern VCHIQ_STATUS_T
vchiq_arm_vcresume(struct vchiq_state *state);
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-25 18:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-25 18:17 [PATCH 1/9] staging: vc04_services: Remove function vchiu_queue_is_full() Nishka Dasgupta
2019-06-25 18:17 ` [PATCH 2/9] staging: vc04_services: Remove function vchiq_arm_allow_resume() Nishka Dasgupta
2019-06-25 18:17 ` Nishka Dasgupta [this message]
2019-06-25 18:17 ` [PATCH 4/9] staging: vc04_services: Remove vchiq_pause_internal() Nishka Dasgupta
2019-06-25 18:17 ` [PATCH 5/9] staging: vc04_services: Remove vchiq_resume_internal() Nishka Dasgupta
2019-06-25 18:17 ` [PATCH 6/9] staging: vc04_services: Remove vchiq_use_service_no_resume() Nishka Dasgupta
2019-06-25 18:17 ` [PATCH 7/9] staging: vc04_services: Remove vchiq_send_remote_release() Nishka Dasgupta
2019-06-25 18:17 ` [PATCH 8/9] staging: vc04_services: Remove function output_timeout_error() Nishka Dasgupta
2019-06-25 18:17 ` [PATCH 9/9] staging: vc04_services: Remove function block_resume() Nishka Dasgupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190625181710.2267-3-nishkadg.linux@gmail.com \
--to=nishkadg.linux@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=eric@anholt.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).