[PATCH v3 10/14] arm64: dts: qcom: qcs404: Add OPP table

Jorge Ramirez-Ortiz
2019-06-25T16:52:07Z

Add a CPU OPP table to qcs404

Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3f17e1b09c13..d876dae5b0a5 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -83,6 +83,24 @@
};
};

+ cpu_opp_table: cpu-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ opp-microvolt = <1224000 1224000 1224000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-microvolt = <1288000 1288000 1288000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-microvolt = <1384000 1384000 1384000>;
+ };
+ };
+
firmware {
scm: scm {
compatible = "qcom,scm-qcs404", "qcom,scm";
--
2.21.0