From: Lokesh Vutla <lokeshvutla@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Lokesh Vutla <lokeshvutla@ti.com>,
Device Tree Mailing List <devicetree@vger.kernel.org>,
Sekhar Nori <nsekhar@ti.com>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v5 1/3] firmware: ti_sci: Allow for device shared and exclusive requests
Date: Mon, 29 Jul 2019 17:54:51 +0530 [thread overview]
Message-ID: <20190729122453.32252-2-lokeshvutla@ti.com> (raw)
In-Reply-To: <20190729122453.32252-1-lokeshvutla@ti.com>
Sysfw provides an option for requesting exclusive access for a
device using the flags MSG_FLAG_DEVICE_EXCLUSIVE. If this flag is
not used, the device is meant to be shared across hosts. Once a device
is requested from a host with this flag set, any request to this
device from a different host will be nacked by sysfw. Current tisci
driver enables this flag for every device requests. But this may not
be true for all the devices. So provide a separate commands in driver
for exclusive and shared device requests.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
drivers/firmware/ti_sci.c | 45 ++++++++++++++++++++++++--
include/linux/soc/ti/ti_sci_protocol.h | 3 ++
2 files changed, 46 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index cdee0b45943d..4126be9e3216 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -635,6 +635,7 @@ static int ti_sci_get_device_state(const struct ti_sci_handle *handle,
/**
* ti_sci_cmd_get_device() - command to request for device managed by TISCI
+ * that can be shared with other hosts.
* @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* @id: Device Identifier
*
@@ -642,11 +643,29 @@ static int ti_sci_get_device_state(const struct ti_sci_handle *handle,
* usage count by balancing get_device with put_device. No refcounting is
* managed by driver for that purpose.
*
- * NOTE: The request is for exclusive access for the processor.
- *
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
+{
+ return ti_sci_set_device_state(handle, id, 0,
+ MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_cmd_get_device_exclusive() - command to request for device managed by
+ * TISCI that is exclusively owned by the
+ * requesting host.
+ * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id: Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle,
+ u32 id)
{
return ti_sci_set_device_state(handle, id,
MSG_FLAG_DEVICE_EXCLUSIVE,
@@ -665,6 +684,26 @@ static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id)
+{
+ return ti_sci_set_device_state(handle, id, 0,
+ MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_cmd_idle_device_exclusive() - Command to idle a device managed by
+ * TISCI that is exclusively owned by
+ * requesting host.
+ * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id: Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle,
+ u32 id)
{
return ti_sci_set_device_state(handle, id,
MSG_FLAG_DEVICE_EXCLUSIVE,
@@ -2894,7 +2933,9 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
core_ops->reboot_device = ti_sci_cmd_core_reboot;
dops->get_device = ti_sci_cmd_get_device;
+ dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive;
dops->idle_device = ti_sci_cmd_idle_device;
+ dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive;
dops->put_device = ti_sci_cmd_put_device;
dops->is_valid = ti_sci_cmd_dev_is_valid;
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index 6c610e188a44..9531ec823298 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -97,7 +97,10 @@ struct ti_sci_core_ops {
*/
struct ti_sci_dev_ops {
int (*get_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*get_device_exclusive)(const struct ti_sci_handle *handle, u32 id);
int (*idle_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*idle_device_exclusive)(const struct ti_sci_handle *handle,
+ u32 id);
int (*put_device)(const struct ti_sci_handle *handle, u32 id);
int (*is_valid)(const struct ti_sci_handle *handle, u32 id);
int (*get_context_loss_count)(const struct ti_sci_handle *handle,
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-29 12:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 12:24 [PATCH v5 0/3] soc: ti: k3: Allow for exclusive and shared device requests Lokesh Vutla
2019-07-29 12:24 ` Lokesh Vutla [this message]
2019-07-29 12:24 ` [PATCH v5 2/3] dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access Lokesh Vutla
2019-07-29 12:24 ` [PATCH v5 3/3] soc: ti: " Lokesh Vutla
2019-08-20 12:48 ` [PATCH v5 0/3] soc: ti: k3: Allow for exclusive and shared device requests Lokesh Vutla
2019-08-21 8:06 ` santosh.shilimkar
2019-08-26 10:11 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190729122453.32252-2-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox