Re: REGRESSION: i2c-imx endlessly triggers clk warning

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

Ping?

On Mon, Jul 29, 2019 at 11:28:52AM +0000, Aisheng Dong wrote:
> > From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
> > Sent: Monday, July 29, 2019 7:17 PM
> > 
> > Booting 5.2 on the VF610 based ZII rev B board results in the board not making
> > progress due to an endless stream of:
> > 
> 
> Thanks for the reporting.
> 
> > [  153.077831] ------------[ cut here ]------------ [  153.082528] WARNING: CPU:
> > 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24
> > [  153.093077] i2c0 already disabled [  153.096416] Modules linked in:
> > [  153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G        W
> > 5.2.0+ #321
> > [  153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
> > [  153.113772] Workqueue: events deferred_probe_work_func
> > [  153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>]
> > (show_stack+0x10/0x14) [  153.126778] [<c0014734>] (show_stack) from
> > [<c083f8dc>] (dump_stack+0x9c/0xd4) [  153.134051] [<c083f8dc>]
> > (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [  153.141056]
> > [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48)
> > [  153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>]
> > (clk_core_disable_lock+0x18/0x24) [  153.157413] [<c040fde0>]
> > (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec)
> > [  153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>]
> > (platform_drv_probe+0x48/0x98) [  153.174297] [<c04b9178>]
> > (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0)
> > [  153.182605] [<c04b7298>] (really_probe) from [<c04b7554>]
> > (driver_probe_device+0x5c/0x174) [  153.190909] [<c04b7554>]
> > (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c)
> > [  153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>]
> > (__device_attach+0xa0/0x108) [  153.207782] [<c04b746c>] (__device_attach)
> > from [<c04b65a4>] (bus_probe_device+0x88/0x90) [  153.215999]
> > [<c04b65a4>] (bus_probe_device) from [<c04b6a04>]
> > (deferred_probe_work_func+0x60/0x90)
> > [  153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>]
> > (process_one_work+0x204/0x634) [  153.234178] [<c004f190>]
> > (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484)
> > [  153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>]
> > (kthread+0x118/0x150) [  153.249758] [<c0055c2c>] (kthread) from
> > [<c00090b4>] (ret_from_fork+0x14/0x20) [  153.257006] Exception
> > stack(0xdde43fb0 to 0xdde43ff8)
> > [  153.262095] 3fa0:                                     00000000
> > 00000000 00000000 00000000
> > [  153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000
> > 00000000 00000000 00000000 [  153.278520] 3fe0: 00000000 00000000
> > 00000000 00000000 00000013 00000000 [  153.285159] irq event stamp:
> > 3323022 [  153.288787] hardirqs last  enabled at (3323021): [<c0861c4c>]
> > _raw_spin_unlock_irq+0x24/0x2c [  153.297261] hardirqs last disabled at
> > (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [  153.305392]
> > softirqs last  enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540
> > [  153.313352] softirqs last disabled at (3322081): [<c00385c0>]
> > irq_exit+0x10c/0x128 [  153.320946] ---[ end trace a506731ccd9bd703 ]---
> > 
> > My guess is that this is due to a combination of e1ab9a468e3b ("i2c:
> > imx: improve the error handling in i2c_imx_dma_request()") and the fact that
> > my configuration has CONFIG_FSL_EDMA=m.  Given that the boot makes no
> > progress, it seems that this driver now requires EDMA to be built-in _if_ this
> > driver is also built in.  It seems that Kconfig allows an invalid configuration as
> > far as the driver is concerned.
> > 
> > However, even though it seems that EDMA needs to be built-in with 5.2, this
> > should not trigger the above kernel warning, which suggests something is
> > wrong in the driver cleanup paths.
> 
> Copy Yibin to check the possible edma issue.
> 
> Regards
> Aisheng
> 
> > 
> > --
> > RMK's Patch system:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ar
> > mlinux.org.uk%2Fdeveloper%2Fpatches%2F&amp;data=02%7C01%7Caisheng.
> > dong%40nxp.com%7Ce3e704d7d9414e860c7a08d714165ebc%7C686ea1d3b
> > c2b4c6fa92cd99c5c301635%7C0%7C0%7C636999958630559001&amp;sdata
> > =2d2Ti0gMN2vi7n4hPrsPZ2jGw3kqScStqPzpI%2BiEOXY%3D&amp;reserved=0
> > FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps
> > up According to speedtest.net: 11.9Mbps down 500kbps up
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel