* [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings @ 2019-07-24 7:49 Stefan Riedmueller 2019-07-24 7:49 ` [PATCH 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller 2019-08-13 16:04 ` [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring 0 siblings, 2 replies; 6+ messages in thread From: Stefan Riedmueller @ 2019-07-24 7:49 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Stefan Riedmueller, Andrew Smirnov, Fabio Estevam, Sascha Hauer, linux-kernel, Rob Herring, linux-imx, Manivannan Sadhasivam, Shawn Guo Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and phyBOARD-Segin. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 7294ac36f4c0..40f007859092 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -161,12 +161,20 @@ properties: items: - enum: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL + - phytec,imx6ul-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit + - phytec,imx6ul-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit + - phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL - const: fsl,imx6ul - description: i.MX6ULL based Boards items: - enum: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board + - phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL + - phytec,imx6ull-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit + - phytec,imx6ull-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit + - phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull - description: i.MX6ULZ based Boards -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings 2019-07-24 7:49 [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller @ 2019-07-24 7:49 ` Stefan Riedmueller 2019-08-13 16:04 ` [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring 1 sibling, 0 replies; 6+ messages in thread From: Stefan Riedmueller @ 2019-07-24 7:49 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Stefan Riedmueller, Andrew Smirnov, Fabio Estevam, Sascha Hauer, linux-kernel, Rob Herring, linux-imx, Manivannan Sadhasivam, Shawn Guo Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and phyFLEX-i.MX6. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- Documentation/devicetree/bindings/arm/fsl.yaml | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 40f007859092..00a037cf5c86 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -112,6 +112,13 @@ properties: - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite - fsl,imx6q-sabresd + - phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6 + - phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board + - phytec,imx6q-pbab01-nand # PHYTEC phyFLEX eval Kit + - phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira with i.MX6 Quad + - phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK + - phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK + - phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - const: fsl,imx6q @@ -121,6 +128,9 @@ properties: - enum: - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board + - phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6 + - phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira with i.MX6 QuadPlus + - phytec,imx6qp-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK - const: fsl,imx6qp - description: i.MX6DL based Boards @@ -131,6 +141,13 @@ properties: - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6 + - phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board + - phytec,imx6dl-pbab01-nand # PHYTEC phyFLEX eval Kit + - phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira with i.MX6 DL + - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK + - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK + - phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 DL - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings 2019-07-24 7:49 [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller 2019-07-24 7:49 ` [PATCH 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller @ 2019-08-13 16:04 ` Rob Herring 2019-08-15 10:55 ` Stefan Riedmüller 1 sibling, 1 reply; 6+ messages in thread From: Rob Herring @ 2019-08-13 16:04 UTC (permalink / raw) To: Stefan Riedmueller Cc: Mark Rutland, devicetree, Andrew Smirnov, Fabio Estevam, Sascha Hauer, linux-kernel, linux-imx, Manivannan Sadhasivam, Shawn Guo, linux-arm-kernel On Wed, Jul 24, 2019 at 09:49:32AM +0200, Stefan Riedmueller wrote: > Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and > phyBOARD-Segin. > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml > index 7294ac36f4c0..40f007859092 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.yaml > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml > @@ -161,12 +161,20 @@ properties: > items: > - enum: > - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board > + - phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL > + - phytec,imx6ul-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit > + - phytec,imx6ul-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit > + - phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL This doesn't match what is in the dts files: arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi: compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts: compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi: compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; > - const: fsl,imx6ul > > - description: i.MX6ULL based Boards > items: > - enum: > - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board > + - phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL > + - phytec,imx6ull-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit > + - phytec,imx6ull-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit > + - phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL > - const: fsl,imx6ull > > - description: i.MX6ULZ based Boards > -- > 2.7.4 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings 2019-08-13 16:04 ` [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring @ 2019-08-15 10:55 ` Stefan Riedmüller 2019-08-15 13:43 ` Rob Herring 0 siblings, 1 reply; 6+ messages in thread From: Stefan Riedmüller @ 2019-08-15 10:55 UTC (permalink / raw) To: Rob Herring Cc: Mark Rutland, devicetree, Andrew Smirnov, Fabio Estevam, Sascha Hauer, linux-kernel, linux-imx, Manivannan Sadhasivam, Shawn Guo, linux-arm-kernel Hi Rob, On 13.08.19 18:04, Rob Herring wrote: > On Wed, Jul 24, 2019 at 09:49:32AM +0200, Stefan Riedmueller wrote: >> Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and >> phyBOARD-Segin. >> >> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> >> --- >> Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml >> index 7294ac36f4c0..40f007859092 100644 >> --- a/Documentation/devicetree/bindings/arm/fsl.yaml >> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml >> @@ -161,12 +161,20 @@ properties: >> items: >> - enum: >> - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board >> + - phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL >> + - phytec,imx6ul-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit >> + - phytec,imx6ul-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit >> + - phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL > > This doesn't match what is in the dts files: > > arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi: compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; > arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts: compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", > "fsl,imx6ul"; > arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi: compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", > "fsl,imx6ul"; Shawn already applied my patches which rename the compatibles, see https://lkml.org/lkml/2019/7/23/42 Maybe I was a little too fast sending this patch. Stefan > >> - const: fsl,imx6ul >> >> - description: i.MX6ULL based Boards >> items: >> - enum: >> - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board >> + - phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL >> + - phytec,imx6ull-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit >> + - phytec,imx6ull-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit >> + - phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL >> - const: fsl,imx6ull >> >> - description: i.MX6ULZ based Boards >> -- >> 2.7.4 >> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings 2019-08-15 10:55 ` Stefan Riedmüller @ 2019-08-15 13:43 ` Rob Herring 2019-08-16 11:42 ` Stefan Riedmüller 0 siblings, 1 reply; 6+ messages in thread From: Rob Herring @ 2019-08-15 13:43 UTC (permalink / raw) To: Stefan Riedmüller Cc: Mark Rutland, devicetree, Andrew Smirnov, Fabio Estevam, Sascha Hauer, linux-kernel@vger.kernel.org, NXP Linux Team, Manivannan Sadhasivam, Shawn Guo, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Thu, Aug 15, 2019 at 4:55 AM Stefan Riedmüller <s.riedmueller@phytec.de> wrote: > > Hi Rob, > > On 13.08.19 18:04, Rob Herring wrote: > > On Wed, Jul 24, 2019 at 09:49:32AM +0200, Stefan Riedmueller wrote: > >> Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and > >> phyBOARD-Segin. > >> > >> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > >> --- > >> Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ > >> 1 file changed, 8 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml > >> index 7294ac36f4c0..40f007859092 100644 > >> --- a/Documentation/devicetree/bindings/arm/fsl.yaml > >> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml > >> @@ -161,12 +161,20 @@ properties: > >> items: > >> - enum: > >> - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board > >> + - phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL > >> + - phytec,imx6ul-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit > >> + - phytec,imx6ul-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit > >> + - phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL > > > > This doesn't match what is in the dts files: > > > > arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi: compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; > > arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts: compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", > > "fsl,imx6ul"; > > arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi: compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", > > "fsl,imx6ul"; > > Shawn already applied my patches which rename the compatibles, see > https://lkml.org/lkml/2019/7/23/42 In any case, it still doesn't match. For example, from those patches: + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; + compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063","fsl,imx6ull"; The correct schema for this would be: items: - const: phytec,imx6ull-pbacd10-emmc - const: phytec,imx6ull-pbacd10 - const: phytec,imx6ull-pcl063 - const: fsl,imx6ull This defines how many entries (4), what they are, and the order of them. Maybe the first entry can be an enum with the -nand compatible if those are 2 options. Run 'make dtbs_check' and make sure there aren't warnings for the root node. Rob _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings 2019-08-15 13:43 ` Rob Herring @ 2019-08-16 11:42 ` Stefan Riedmüller 0 siblings, 0 replies; 6+ messages in thread From: Stefan Riedmüller @ 2019-08-16 11:42 UTC (permalink / raw) To: Rob Herring Cc: Mark Rutland, devicetree, Andrew Smirnov, Fabio Estevam, Sascha Hauer, linux-kernel@vger.kernel.org, NXP Linux Team, Manivannan Sadhasivam, Shawn Guo, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE Hi Rob, On 15.08.19 15:43, Rob Herring wrote: > On Thu, Aug 15, 2019 at 4:55 AM Stefan Riedmüller > <s.riedmueller@phytec.de> wrote: >> >> Hi Rob, >> >> On 13.08.19 18:04, Rob Herring wrote: >>> On Wed, Jul 24, 2019 at 09:49:32AM +0200, Stefan Riedmueller wrote: >>>> Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and >>>> phyBOARD-Segin. >>>> >>>> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> >>>> --- >>>> Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ >>>> 1 file changed, 8 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml >>>> index 7294ac36f4c0..40f007859092 100644 >>>> --- a/Documentation/devicetree/bindings/arm/fsl.yaml >>>> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml >>>> @@ -161,12 +161,20 @@ properties: >>>> items: >>>> - enum: >>>> - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board >>>> + - phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL >>>> + - phytec,imx6ul-pbacd10-emmc # PHYTEC phyBOARD-Segin eMMC Kit >>>> + - phytec,imx6ul-pbacd10-nand # PHYTEC phyBOARD-Segin NAND Kit >>>> + - phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL >>> >>> This doesn't match what is in the dts files: >>> >>> arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi: compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; >>> arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts: compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", >>> "fsl,imx6ul"; >>> arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi: compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", >>> "fsl,imx6ul"; >> >> Shawn already applied my patches which rename the compatibles, see >> https://lkml.org/lkml/2019/7/23/42 > > In any case, it still doesn't match. For example, from those patches: > > + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; > + compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10", > + "phytec,imx6ull-pcl063","fsl,imx6ull"; > > The correct schema for this would be: > > items: > - const: phytec,imx6ull-pbacd10-emmc > - const: phytec,imx6ull-pbacd10 > - const: phytec,imx6ull-pcl063 > - const: fsl,imx6ull > > This defines how many entries (4), what they are, and the order of > them. Maybe the first entry can be an enum with the -nand compatible > if those are 2 options. > > Run 'make dtbs_check' and make sure there aren't warnings for the root node. Thanks for your input. I will take another closer look at this and send a new version. Stefan > > Rob > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-08-16 11:42 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-07-24 7:49 [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller 2019-07-24 7:49 ` [PATCH 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller 2019-08-13 16:04 ` [PATCH 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring 2019-08-15 10:55 ` Stefan Riedmüller 2019-08-15 13:43 ` Rob Herring 2019-08-16 11:42 ` Stefan Riedmüller
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).