From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Chanwoo Choi <cw00.choi@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH v2 1/2] ARM: dts: exynos: Add support ARM architected timers
Date: Mon, 26 Aug 2019 12:31:41 +0200 [thread overview]
Message-ID: <20190826103142.3477-3-m.szyprowski@samsung.com> (raw)
In-Reply-To: <20190826103142.3477-1-m.szyprowski@samsung.com>
All CortexA7/A15 based Exynos SoCs have ARM architected timers, so enable
support for them directly in the base dtsi for Exynos3250, Exynos5250
and Exynos54xx SoCs. None of the known firmware properly configures arch
timer registers, so mark them as not-fw-configured and set frequency
to 24MHz, which is the only configuration supported by the remaining
drivers (clocks) so far.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
arch/arm/boot/dts/exynos3250.dtsi | 10 ++++++++++
arch/arm/boot/dts/exynos5250.dtsi | 1 +
arch/arm/boot/dts/exynos54xx.dtsi | 10 ++++++++++
3 files changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 5659c4a10729..01e06b49d702 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -132,6 +132,16 @@
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4157a1315db9..f78897413cbc 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1089,6 +1089,7 @@
* so we need the value from DT.
*/
clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
};
};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9c3b63b7cac6..4e6c29530632 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -45,6 +45,16 @@
status = "disabled";
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-26 10:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190826103201eucas1p1358f33d8fbdc8cef8ba2ebdcb1b3a51a@eucas1p1.samsung.com>
2019-08-26 10:31 ` [PATCH 0/5] Exynos SoCs: enable support for ARM Architected Timers Marek Szyprowski
2019-08-26 10:31 ` [PATCH v2 0/2] " Marek Szyprowski
2019-08-26 10:31 ` Marek Szyprowski [this message]
2019-08-26 10:31 ` [PATCH v2 2/2] ARM: exynos: Enable support for ARM architected timers Marek Szyprowski
2019-08-26 10:49 ` Marc Zyngier
2019-08-28 8:22 ` Marek Szyprowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826103142.3477-3-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox