From: Maxime Ripard <mripard@kernel.org>
To: Chen-Yu Tsai <wens@csie.org>, lgirdwood@gmail.com, broonie@kernel.org
Cc: codekipper@gmail.com, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] ASoC: sun4i: Revert A83t description
Date: Tue, 27 Aug 2019 11:55:54 +0200 [thread overview]
Message-ID: <20190827095554.33tipdzz4p44zyzr@flea> (raw)
In-Reply-To: <20190827093206.17919-2-mripard@kernel.org>
[-- Attachment #1.1: Type: text/plain, Size: 3072 bytes --]
On Tue, Aug 27, 2019 at 11:32:06AM +0200, Maxime Ripard wrote:
> From: Maxime Ripard <maxime.ripard@bootlin.com>
>
> The last set of reworks included some fixes to change the A83t behaviour
> and "fix" it.
>
> It turns out that the controller described in the datasheet and the one
> supported here are not the same, yet the A83t has the two of them, and the
> one supported in the driver wasn't the one described in the datasheet.
>
> Fix this by reintroducing the proper quirks.
>
> Fixes: 69e450e50ca6 ("ASoC: sun4i-i2s: Fix the LRCK period on A83t")
> Fixes: bf943d527987 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t")
> Fixes: 2e04fc4dbf50 ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t")
> Fixes: 515fcfbc7736 ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs")
> Fixes: c1d3a921d72b ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs")
> Fixes: fb19739d7f68 ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs")
> Fixes: 71137bcd0a9a ("ASoC: sun4i-i2s: Move the format configuration to a callback")
> Fixes: d70be625f25a ("ASoC: sun4i-i2s: Move the channel configuration to a callback")
> Reported-by: Chen-Yu Tsai <wens@csie.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
> sound/soc/sunxi/sun4i-i2s.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index a6a3f772fdf0..498ceebd9135 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -1106,18 +1106,18 @@ static const struct sun4i_i2s_quirks sun8i_a83t_i2s_quirks = {
> .has_reset = true,
> .reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
> .sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
> - .field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 8, 8),
> - .field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 2),
> - .field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 6),
> - .bclk_dividers = sun8i_i2s_clk_div,
> - .num_bclk_dividers = ARRAY_SIZE(sun8i_i2s_clk_div),
> - .mclk_dividers = sun8i_i2s_clk_div,
> - .num_mclk_dividers = ARRAY_SIZE(sun8i_i2s_clk_div),
> - .get_bclk_parent_rate = sun8i_i2s_get_bclk_parent_rate,
> - .get_sr = sun8i_i2s_get_sr_wss,
> - .get_wss = sun8i_i2s_get_sr_wss,
> - .set_chan_cfg = sun8i_i2s_set_chan_cfg,
> - .set_fmt = sun8i_i2s_set_soc_fmt,
> + .field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 7, 7),
> + .field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
> + .field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
> + .bclk_dividers = sun4i_i2s_bclk_div,
> + .num_bclk_dividers = ARRAY_SIZE(sun4i_i2s_bclk_div),
> + .mclk_dividers = sun4i_i2s_mclk_div,
> + .num_mclk_dividers = ARRAY_SIZE(sun4i_i2s_mclk_div),
> + .get_bclk_parent_rate = sun4i_i2s_get_bclk_parent_rate,
> + .get_sr = sun4i_i2s_get_sr_wss,
This should be sun4i_i2s_get_sr
> + .get_wss = sun4i_i2s_get_sr_wss,
This should be sun4i_i2s_get_wss
Sorry for that.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-27 9:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 9:32 [PATCH 1/2] Revert "ASoC: sun4i-i2s: Remove duplicated quirks structure" Maxime Ripard
2019-08-27 9:32 ` [PATCH 2/2] ASoC: sun4i: Revert A83t description Maxime Ripard
2019-08-27 9:51 ` Chen-Yu Tsai
2019-08-27 9:55 ` Maxime Ripard [this message]
2019-08-27 10:43 ` [PATCH 1/2] Revert "ASoC: sun4i-i2s: Remove duplicated quirks structure" Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827095554.33tipdzz4p44zyzr@flea \
--to=mripard@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=codekipper@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox