From: Satendra Singh Thakur <sst2005@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
satendrasingh.thakur@hcl.com, dmaengine@vger.kernel.org,
Dan Williams <dan.j.williams@intel.com>,
Satendra Singh Thakur <sst2005@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/9] probe/dma/sun6i: removed redundant code from sun6i dma controller's probe function
Date: Sun, 15 Sep 2019 13:01:44 +0530 [thread overview]
Message-ID: <20190915073144.23965-1-sst2005@gmail.com> (raw)
In-Reply-To: <20190915072644.23329-1-sst2005@gmail.com>
1. In order to remove duplicate code, following functions:
platform_get_resource
devm_kzalloc
devm_ioremap_resource
devm_clk_get
platform_get_irq
are replaced with a macro devm_platform_probe_helper.
2. This patch depends on the file include/linux/probe-helper.h
which is pushed in previous patch [01/09].
Signed-off-by: Satendra Singh Thakur <satendrasingh.thakur@hcl.com>
Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com>
---
drivers/dma/sun6i-dma.c | 30 +++++++++---------------------
1 file changed, 9 insertions(+), 21 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index ed5b68dcfe50..41ee054bbeeb 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -19,6 +19,7 @@
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/probe-helper.h>
#include "virt-dma.h"
@@ -1234,34 +1235,21 @@ static int sun6i_dma_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sun6i_dma_dev *sdc;
- struct resource *res;
int ret, i;
- sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
- if (!sdc)
- return -ENOMEM;
+ /*
+ * This macro internally combines following functions:
+ * devm_kzalloc, platform_get_resource, devm_ioremap_resource,
+ * devm_clk_get, platform_get_irq
+ */
+ ret = devm_platform_probe_helper(pdev, sdc, NULL);
+ if (ret < 0)
+ return ret;
sdc->cfg = of_device_get_match_data(&pdev->dev);
if (!sdc->cfg)
return -ENODEV;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- sdc->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(sdc->base))
- return PTR_ERR(sdc->base);
-
- sdc->irq = platform_get_irq(pdev, 0);
- if (sdc->irq < 0) {
- dev_err(&pdev->dev, "Cannot claim IRQ\n");
- return sdc->irq;
- }
-
- sdc->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(sdc->clk)) {
- dev_err(&pdev->dev, "No clock specified\n");
- return PTR_ERR(sdc->clk);
- }
-
if (sdc->cfg->has_mbus_clk) {
sdc->clk_mbus = devm_clk_get(&pdev->dev, "mbus");
if (IS_ERR(sdc->clk_mbus)) {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-15 7:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-15 7:00 [PATCH 0/9] added helper macros to remove duplicate code from probe functions of the platform drivers Satendra Singh Thakur
2019-09-15 7:26 ` [PATCH 1/9] probe/dma : added helper macros to remove redundant/duplicate code from probe functions of the dma controller drivers Satendra Singh Thakur
2019-09-15 7:29 ` [PATCH 3/9] probe/dma/zx: removed redundant code from zx dma controller's probe function Satendra Singh Thakur
2019-09-15 7:30 ` [PATCH 5/9] probe/dma/mtk-hs: removed redundant code from mediatek hs " Satendra Singh Thakur
2019-09-15 7:31 ` Satendra Singh Thakur [this message]
2019-09-15 7:32 ` [PATCH 7/9] probe/dma/sun4i: removed redundant code from sun4i " Satendra Singh Thakur
2019-09-15 7:32 ` [PATCH 9/9] probe/dma/owl: removed redundant code from owl " Satendra Singh Thakur
2019-09-18 10:27 ` [PATCH 0/9] added helper macros to remove duplicate code from probe functions of the platform drivers Vinod Koul
2019-09-21 14:57 ` Satendra Singh Thakur
2019-09-24 19:27 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190915073144.23965-1-sst2005@gmail.com \
--to=sst2005@gmail.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=satendrasingh.thakur@hcl.com \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).