From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Claudiu.Beznea@microchip.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] pinctrl: at91-pio4: implement .get_multiple and .set_multiple
Date: Wed, 18 Sep 2019 13:36:57 +0200 [thread overview]
Message-ID: <20190918113657.25998-1-alexandre.belloni@bootlin.com> (raw)
Implement .get_multiple and .set_multiple to allow reading or setting
multiple pins simultaneously. Pins in the same bank will all be switched at
the same time, improving synchronization and performances.
Keep the driver future proof by allowing its use on 64bits platforms if
they ever appear with this IP and we end up with a mismatch between
ATMEL_PIO_NPINS_PER_BANK and BITS_PER_LONG.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
Changes in v3:
- Add ack from ludovic
- add comment and amend commit message to explain the ifdefd
drivers/pinctrl/pinctrl-at91-pio4.c | 62 +++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index d6de4d360cd4..e380202eb86a 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -328,6 +328,33 @@ static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset)
return !!(reg & BIT(pin->line));
}
+static int atmel_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ unsigned int bank;
+
+ bitmap_zero(bits, atmel_pioctrl->npins);
+
+ for (bank = 0; bank < atmel_pioctrl->nbanks; bank++) {
+ unsigned int word = bank;
+ unsigned int offset = 0;
+ unsigned int reg;
+
+#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
+ word = BIT_WORD(bank * ATMEL_PIO_NPINS_PER_BANK);
+ offset = bank * ATMEL_PIO_NPINS_PER_BANK % BITS_PER_LONG;
+#endif
+ if (!mask[word])
+ continue;
+
+ reg = atmel_gpio_read(atmel_pioctrl, bank, ATMEL_PIO_PDSR);
+ bits[word] |= mask[word] & (reg << offset);
+ }
+
+ return 0;
+}
+
static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
@@ -358,11 +385,46 @@ static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
BIT(pin->line));
}
+static void atmel_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ unsigned int bank;
+
+ for (bank = 0; bank < atmel_pioctrl->nbanks; bank++) {
+ unsigned int bitmask;
+ unsigned int word = bank;
+
+/*
+ * On a 64-bit platform, BITS_PER_LONG is 64 so it is necessary to iterate over
+ * two 32bit words to handle the whole bitmask
+ */
+#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
+ word = BIT_WORD(bank * ATMEL_PIO_NPINS_PER_BANK);
+#endif
+ if (!mask[word])
+ continue;
+
+ bitmask = mask[word] & bits[word];
+ atmel_gpio_write(atmel_pioctrl, bank, ATMEL_PIO_SODR, bitmask);
+
+ bitmask = mask[word] & ~bits[word];
+ atmel_gpio_write(atmel_pioctrl, bank, ATMEL_PIO_CODR, bitmask);
+
+#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
+ mask[word] >>= ATMEL_PIO_NPINS_PER_BANK;
+ bits[word] >>= ATMEL_PIO_NPINS_PER_BANK;
+#endif
+ }
+}
+
static struct gpio_chip atmel_gpio_chip = {
.direction_input = atmel_gpio_direction_input,
.get = atmel_gpio_get,
+ .get_multiple = atmel_gpio_get_multiple,
.direction_output = atmel_gpio_direction_output,
.set = atmel_gpio_set,
+ .set_multiple = atmel_gpio_set_multiple,
.to_irq = atmel_gpio_to_irq,
.base = 0,
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-09-18 11:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-18 11:36 Alexandre Belloni [this message]
2019-10-03 8:10 ` [PATCH v3] pinctrl: at91-pio4: implement .get_multiple and .set_multiple Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190918113657.25998-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox