[PATCH] iio: adc: imx25-gcq: fix uninitialized variable usage

[PATCH] iio: adc: imx25-gcq: fix uninitialized variable usage

[Yizhuo]

In function mx25_gcq_irq(), local variable "stats" could
be uninitialized if function regmap_read() returns -EINVAL.
However, this value is used in if statement, which is
potentially unsafe. The same case applied to the variable
"data" in function mx25_gcq_get_raw_value() in the same file.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
---
 drivers/iio/adc/fsl-imx25-gcq.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index fa71489195c6..3b1e12b7c1ac 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -73,8 +73,12 @@ static irqreturn_t mx25_gcq_irq(int irq, void *data)
 {
 	struct mx25_gcq_priv *priv = data;
 	u32 stats;
+	int ret;
 
-	regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
+	ret = regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
+	if (ret) {
+		return ret;
+	}
 
 	if (stats & MX25_ADCQ_SR_EOQ) {
 		regmap_update_bits(priv->regs, MX25_ADCQ_MR,
@@ -100,6 +104,7 @@ static int mx25_gcq_get_raw_value(struct device *dev,
 {
 	long timeout;
 	u32 data;
+	int ret;
 
 	/* Setup the configuration we want to use */
 	regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
@@ -121,7 +126,11 @@ static int mx25_gcq_get_raw_value(struct device *dev,
 		return -ETIMEDOUT;
 	}
 
-	regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
+	ret = regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
+	if (ret) {
+		dev_err(dev, "Failed to read MX25_ADCQ_FIFO.\n");
+		return ret;
+	}
 
 	*val = MX25_ADCQ_FIFO_DATA(data);
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iio: adc: imx25-gcq: fix uninitialized variable usage

[Jonathan Cameron]

On Mon, 30 Sep 2019 12:53:54 -0700
Yizhuo <yzhai003@ucr.edu> wrote:

> In function mx25_gcq_irq(), local variable "stats" could
> be uninitialized if function regmap_read() returns -EINVAL.
> However, this value is used in if statement, which is
> potentially unsafe. The same case applied to the variable
> "data" in function mx25_gcq_get_raw_value() in the same file.
> 
> Signed-off-by: Yizhuo <yzhai003@ucr.edu>

Following similar logic to the other patch I just reviewed
for the stm32-timer-trigger, lets chase if this can happen.
In this case a clock is not provided during the regmap iomem register
and as such, the call can't actually fail.

So this one is more of a tidy up and hardening against future
problems if the code changes, than an actual fix.

Worth having, but perhaps remove the word fix from the description
unless you can find a path I've missed in which this might actually
happen as the code currently is.

One minor comment inline,

Thanks,

Jonathan
> ---
>  drivers/iio/adc/fsl-imx25-gcq.c | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
> index fa71489195c6..3b1e12b7c1ac 100644
> --- a/drivers/iio/adc/fsl-imx25-gcq.c
> +++ b/drivers/iio/adc/fsl-imx25-gcq.c
> @@ -73,8 +73,12 @@ static irqreturn_t mx25_gcq_irq(int irq, void *data)
>  {
>  	struct mx25_gcq_priv *priv = data;
>  	u32 stats;
> +	int ret;
>  
> -	regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
> +	ret = regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
> +	if (ret) {

No brackets around a single line block like this.

> +		return ret;
> +	}
>  
>  	if (stats & MX25_ADCQ_SR_EOQ) {
>  		regmap_update_bits(priv->regs, MX25_ADCQ_MR,
> @@ -100,6 +104,7 @@ static int mx25_gcq_get_raw_value(struct device *dev,
>  {
>  	long timeout;
>  	u32 data;
> +	int ret;
>  
>  	/* Setup the configuration we want to use */
>  	regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
> @@ -121,7 +126,11 @@ static int mx25_gcq_get_raw_value(struct device *dev,
>  		return -ETIMEDOUT;
>  	}
>  
> -	regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
> +	ret = regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
> +	if (ret) {
> +		dev_err(dev, "Failed to read MX25_ADCQ_FIFO.\n");
> +		return ret;
> +	}
>  
>  	*val = MX25_ADCQ_FIFO_DATA(data);
>  


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel