* [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
2019-09-20 11:52 [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller
@ 2019-09-20 11:52 ` Stefan Riedmueller
2019-10-01 22:18 ` Rob Herring
2019-10-01 22:18 ` [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring
2019-12-09 13:33 ` Stefan Riedmüller
2 siblings, 1 reply; 5+ messages in thread
From: Stefan Riedmueller @ 2019-09-20 11:52 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Mark Rutland, devicetree, Stefan Riedmueller, Andrew Smirnov,
Fabio Estevam, Sascha Hauer, linux-kernel, Rob Herring, linux-imx,
Manivannan Sadhasivam, Shawn Guo
Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
phyFLEX-i.MX6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
Changes in v2:
- Use seperate description for each board instead of squashing them into
the standard board.
---
Documentation/devicetree/bindings/arm/fsl.yaml | 37 ++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index c926ff6eac67..7dbb45cebb86 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -116,6 +116,21 @@ properties:
- technologic,imx6q-ts7970
- const: fsl,imx6q
+ - description: i.MX6Q PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6q
+
+ - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -123,6 +138,13 @@ properties:
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
+ - description: i.MX6QP PHYTEC phyBOARD-Mira
+ items:
+ - const: phytec,imx6qp-pbac06-nand
+ - const: phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
@@ -138,6 +160,21 @@ properties:
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
+ - description: i.MX6DL PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6dl
+
+ - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
2019-09-20 11:52 ` [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller
@ 2019-10-01 22:18 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2019-10-01 22:18 UTC (permalink / raw)
To: Stefan Riedmueller
Cc: Mark Rutland, devicetree, Stefan Riedmueller, Andrew Smirnov,
Sascha Hauer, linux-kernel, Fabio Estevam, linux-arm-kernel
On Fri, 20 Sep 2019 13:52:26 +0200, Stefan Riedmueller wrote:
> Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
> phyFLEX-i.MX6.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
> Changes in v2:
> - Use seperate description for each board instead of squashing them into
> the standard board.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 37 ++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings
2019-09-20 11:52 [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller
2019-09-20 11:52 ` [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller
@ 2019-10-01 22:18 ` Rob Herring
2019-12-09 13:33 ` Stefan Riedmüller
2 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2019-10-01 22:18 UTC (permalink / raw)
To: Stefan Riedmueller
Cc: devicetree, Stefan Riedmueller, Andrew Smirnov, Sascha Hauer,
linux-kernel, linux-imx, Manivannan Sadhasivam, Fabio Estevam,
linux-arm-kernel
On Fri, 20 Sep 2019 13:52:25 +0200, Stefan Riedmueller wrote:
> Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and
> phyBOARD-Segin.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
> Changes in v2:
> - Use seperate description for each board instead of squashing them into
> the standard board.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings
2019-09-20 11:52 [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller
2019-09-20 11:52 ` [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller
2019-10-01 22:18 ` [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring
@ 2019-12-09 13:33 ` Stefan Riedmüller
2 siblings, 0 replies; 5+ messages in thread
From: Stefan Riedmüller @ 2019-12-09 13:33 UTC (permalink / raw)
To: linux-arm-kernel, Mark Rutland
Cc: devicetree, Andrew Smirnov, Shawn Guo, Sascha Hauer, linux-kernel,
Rob Herring, linux-imx, Manivannan Sadhasivam, Fabio Estevam
Hi,
I just wanted to send a gentle ping for these two patches.
Regards,
Stefan
On 20.09.19 13:52, Stefan Riedmueller wrote:
> Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and
> phyBOARD-Segin.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
> Changes in v2:
> - Use seperate description for each board instead of squashing them into
> the standard board.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 1b4b4e6573b5..c926ff6eac67 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -164,6 +164,15 @@ properties:
> - kontron,imx6ul-n6310-som # Kontron N6310 SOM
> - const: fsl,imx6ul
>
> + - description: i.MX6UL PHYTEC phyBOARD-Segin
> + items:
> + - enum:
> + - phytec,imx6ul-pbacd10-emmc
> + - phytec,imx6ul-pbacd10-nand
> + - const: phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL
> + - const: phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL
> + - const: fsl,imx6ul
> +
> - description: Kontron N6310 S Board
> items:
> - const: kontron,imx6ul-n6310-s
> @@ -183,6 +192,15 @@ properties:
> - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
> - const: fsl,imx6ull
>
> + - description: i.MX6ULL PHYTEC phyBOARD-Segin
> + items:
> + - enum:
> + - phytec,imx6ull-pbacd10-emmc
> + - phytec,imx6ull-pbacd10-nand
> + - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
> + - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
> + - const: fsl,imx6ull
> +
> - description: i.MX6ULZ based Boards
> items:
> - enum:
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread