From: Andreas Kemnade <andreas@kemnade.info>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Discussions about the Letux Kernel <letux-kernel@openphoenux.org>,
Tony Lindgren <tony@atomide.com>,
"H. Nikolaus Schaller" <hns@goldelico.com>,
Jyri Sarha <jsarha@ti.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Linux-OMAP <linux-omap@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [Letux-kernel] [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Date: Sun, 6 Oct 2019 22:39:58 +0200 [thread overview]
Message-ID: <20191006223958.67725fdf@aktux> (raw)
In-Reply-To: <20191006145348.GD4740@pendragon.ideasonboard.com>
On Sun, 6 Oct 2019 17:53:48 +0300
Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote:
> Hi Nikolaus,
>
> On Sat, Oct 05, 2019 at 12:50:37PM +0200, H. Nikolaus Schaller wrote:
> > > Am 04.10.2019 um 10:41 schrieb Tomi Valkeinen <tomi.valkeinen@ti.com>:
> > >
> > > On 03/10/2019 19:55, Tony Lindgren wrote:
> > >> The old omapdrm panels got removed for v5.4 in favor of generic panels,
> > >> and the Kconfig options changed. Let's update omap2plus_defconfig
> > >> accordingly so the same panels are still enabled.
> > >> Cc: Jyri Sarha <jsarha@ti.com>
> > >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > >> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > >> Signed-off-by: Tony Lindgren <tony@atomide.com>
> > >> ---
> > >> arch/arm/configs/omap2plus_defconfig | 12 ++++++------
> > >> 1 file changed, 6 insertions(+), 6 deletions(-)
> > >> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> > >> --- a/arch/arm/configs/omap2plus_defconfig
> > >> +++ b/arch/arm/configs/omap2plus_defconfig
> > >> @@ -356,14 +356,14 @@ CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
> > >> CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
> > >> CONFIG_DRM_OMAP_PANEL_DPI=m
> > >> CONFIG_DRM_OMAP_PANEL_DSI_CM=m
> > >> -CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
> > >> -CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
> > >> -CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
> > >> -CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
> > >> -CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
> > >> -CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
> > >> CONFIG_DRM_TILCDC=m
> > >> CONFIG_DRM_PANEL_SIMPLE=m
> > >> +CONFIG_DRM_PANEL_LG_LB035Q02=m
> > >> +CONFIG_DRM_PANEL_NEC_NL8048HL11=m
> > >> +CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
> > >> +CONFIG_DRM_PANEL_SONY_ACX565AKM=m
> > >> +CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
> > >> +CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
> > >> CONFIG_FB=y
> > >> CONFIG_FIRMWARE_EDID=y
> > >> CONFIG_FB_MODE_HELPERS=y
> > >
> > > Sorry, I didn't remember to update these. Some additions:
> > >
> > > These can be dropped, they no longer exist:
> > >
> > > CONFIG_DRM_OMAP_ENCODER_TFP410=m
> > > CONFIG_DRM_OMAP_CONNECTOR_DVI=m
> > > CONFIG_DRM_OMAP_PANEL_DPI=m
> >
> > After being hit by the __always_inline issue [1] I am now
> > back with being able to test v5.4-rc1.
> >
> > Now this patch fixes the build problem, but we still have
> > one: panel drivers are no longer automatically loaded at
> > boot. We now need to manually modprobe them.
> >
> > This has been observed with GTA04 (TD028TTEC1) and OpenPandora
> > (TD043MTEA1). So moving the drivers seems to have changed/broken
> > something with DT based driver matching.
>
> That's really weird, the driver name, the SPI device table and the OF
> device table are the same (except for the "omapdss," prefix that we
> don't add anymore in omapdss-boot-init.c). Would you be able to
> investigate what broke ?
>
in earlier times:
root@gta04:/sys/bus/spi/devices/spi4.0# cat modalias
spi:tpo,td028ttec1
now in 5.4-rc1:
root@gta04:/sys/bus/spi/devices/spi4.0# cat modalias
spi:td028ttec1
root@gta04:~# modinfo /lib/modules/5.4.0-rc1-letux+/kernel/drivers/gpu/drm/panel/panel-tpo-td028ttec1.ko
filename: /lib/modules/5.4.0-rc1-letux+/kernel/drivers/gpu/drm/panel/panel-tpo-td028ttec1.ko
license: GPL
description: Toppoly TD028TTEC1 panel driver
author: H. Nikolaus Schaller <hns@goldelico.com>
srcversion: 6B3E224BCD3D76253CF361C
alias: of:N*T*Ctoppoly,td028ttec1C*
alias: of:N*T*Ctoppoly,td028ttec1
alias: of:N*T*Ctpo,td028ttec1C*
alias: of:N*T*Ctpo,td028ttec1
alias: spi:toppoly,td028ttec1
alias: spi:tpo,td028ttec1
depends: drm
intree: Y
name: panel_tpo_td028ttec1
vermagic: 5.4.0-rc1-letux+ SMP preempt mod_unload ARMv7 p2v8
That alias is not in the list.
Regards,
Andreas
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-06 20:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-03 16:55 [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes Tony Lindgren
2019-10-04 8:41 ` Tomi Valkeinen
2019-10-04 15:54 ` Tony Lindgren
2019-10-07 6:13 ` Tomi Valkeinen
2019-10-05 10:50 ` H. Nikolaus Schaller
2019-10-06 14:53 ` Laurent Pinchart
2019-10-06 15:07 ` H. Nikolaus Schaller
2019-10-06 20:39 ` Andreas Kemnade [this message]
2019-10-07 4:40 ` [Letux-kernel] " Andreas Kemnade
2019-10-07 14:29 ` Tomi Valkeinen
2019-10-07 16:09 ` Andreas Kemnade
2019-10-07 17:08 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191006223958.67725fdf@aktux \
--to=andreas@kemnade.info \
--cc=hns@goldelico.com \
--cc=jsarha@ti.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=letux-kernel@openphoenux.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).