[PATCH v2 0/2] drivers: firmware: xilinx: Add support for versal soc

[PATCH v2 0/2] drivers: firmware: xilinx: Add support for versal soc

[Jolly Shah]

Versal is xilinx's next generation soc. This patch adds
driver support required to be compatible with versal device

v2:
  No changes. Resending to include DT maintaners

Jolly Shah (2):
  dt-bindings: firmware: Add bindings for Versal firmware
  drivers: firmware: xilinx: Add support for versal soc

 .../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt    | 16 +++++++++++++++-
 drivers/firmware/xilinx/zynqmp.c                         |  8 ++++++--
 2 files changed, 21 insertions(+), 3 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/2] dt-bindings: firmware: Add bindings for Versal firmware

[Jolly Shah]

ZynqMP firmware driver can be used for versal also.
Add versal compatible string to zynqmp firmware driver
doc.

Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 .../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt    | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index a4fe136..18c3aea 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -11,7 +11,9 @@ power management service, FPGA service and other platform management
 services.
 
 Required properties:
- - compatible:	Must contain:	"xlnx,zynqmp-firmware"
+ - compatible:	Must contain any of below:
+		"xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC
+		"xlnx,versal-firmware" for Versal
  - method:	The method of calling the PM-API firmware layer.
 		Permitted values are:
 		  - "smc" : SMC #0, following the SMCCC
@@ -21,6 +23,8 @@ Required properties:
 Example
 -------
 
+Zynq Ultrascale+ MPSoC
+----------------------
 firmware {
 	zynqmp_firmware: zynqmp-firmware {
 		compatible = "xlnx,zynqmp-firmware";
@@ -28,3 +32,13 @@ firmware {
 		...
 	};
 };
+
+Versal
+------
+firmware {
+	versal_firmware: versal-firmware {
+		compatible = "xlnx,versal-firmware";
+		method = "smc";
+		...
+	};
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] dt-bindings: firmware: Add bindings for Versal firmware

[Rob Herring]

On Mon,  7 Oct 2019 11:52:22 -0700, Jolly Shah wrote:
> ZynqMP firmware driver can be used for versal also.
> Add versal compatible string to zynqmp firmware driver
> doc.
> 
> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
> ---
>  .../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt    | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/2] drivers: firmware: xilinx: Add support for versal soc

[Jolly Shah]

Versal is xilinx's next generation soc. This patch adds
driver support required to be compatible with versal device.

Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index fd3d837..75bdfaa 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -711,8 +711,11 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
 	int ret;
 
 	np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
-	if (!np)
-		return 0;
+	if (!np) {
+		np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
+		if (!np)
+			return 0;
+	}
 	of_node_put(np);
 
 	ret = get_set_conduit_method(dev->of_node);
@@ -770,6 +773,7 @@ static int zynqmp_firmware_remove(struct platform_device *pdev)
 
 static const struct of_device_id zynqmp_firmware_of_match[] = {
 	{.compatible = "xlnx,zynqmp-firmware"},
+	{.compatible = "xlnx,versal-firmware"},
 	{},
 };
 MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/2] drivers: firmware: xilinx: Add support for versal soc

[Michal Simek]

On 07. 10. 19 20:52, Jolly Shah wrote:
> Versal is xilinx's next generation soc. This patch adds
> driver support required to be compatible with versal device
> 
> v2:
>   No changes. Resending to include DT maintaners
> 
> Jolly Shah (2):
>   dt-bindings: firmware: Add bindings for Versal firmware
>   drivers: firmware: xilinx: Add support for versal soc
> 
>  .../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt    | 16 +++++++++++++++-
>  drivers/firmware/xilinx/zynqmp.c                         |  8 ++++++--
>  2 files changed, 21 insertions(+), 3 deletions(-)
> 

Applied both.
I just removed drivers from subject of 2/2.

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel