* [PATCH] staging: vc04_services: fix warning of Logical continuations should be on the previous line
@ 2019-10-11 21:27 Jules Irenge
2019-10-11 21:38 ` [Outreachy kernel] " Julia Lawall
0 siblings, 1 reply; 3+ messages in thread
From: Jules Irenge @ 2019-10-11 21:27 UTC (permalink / raw)
To: outreachy-kernel
Cc: devel, Jules Irenge, f.fainelli, sbranden, mchehab+samsung,
gregkh, linux-kernel, eric, daniela.mormocea,
bcm-kernel-feedback-list, wahrenst, dave.stevenson, rjui,
hverkuil-cisco, linux-arm-kernel, linux-rpi-kernel
Fix warning of logical continuations should be on the previous line.
Issue detected by checkpatch tool.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
---
.../bcm2835-camera/bcm2835-camera.c | 41 ++++++++-----------
1 file changed, 17 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index d4d1e44b16b2..365bcd97e19d 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -337,9 +337,8 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
if (is_capturing(dev)) {
v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
"Grab another frame");
- vchiq_mmal_port_parameter_set(
- instance,
- dev->capture.camera_port,
+ vchiq_mmal_port_parameter_set(instance,
+ dev->capture.camera_port,
MMAL_PARAMETER_CAPTURE,
&dev->capture.frame_count,
sizeof(dev->capture.frame_count));
@@ -392,9 +391,8 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
is_capturing(dev)) {
v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
"Grab another frame as buffer has EOS");
- vchiq_mmal_port_parameter_set(
- instance,
- dev->capture.camera_port,
+ vchiq_mmal_port_parameter_set(instance,
+ dev->capture.camera_port,
MMAL_PARAMETER_CAPTURE,
&dev->capture.frame_count,
sizeof(dev->capture.frame_count));
@@ -1090,8 +1088,7 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
ret = vchiq_mmal_port_set_format(dev->instance, camera_port);
- if (!ret
- && camera_port ==
+ if (!ret && camera_port ==
&dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) {
bool overlay_enabled =
!!dev->component[COMP_PREVIEW]->enabled;
@@ -1124,9 +1121,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
dev->capture.timeperframe.numerator;
ret = vchiq_mmal_port_set_format(dev->instance, preview_port);
if (overlay_enabled) {
- ret = vchiq_mmal_port_connect_tunnel(
- dev->instance,
- preview_port,
+ ret = vchiq_mmal_port_connect_tunnel(dev->instance,
+ preview_port,
&dev->component[COMP_PREVIEW]->input[0]);
if (!ret)
ret = vchiq_mmal_port_enable(dev->instance,
@@ -1154,9 +1150,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
camera_port->recommended_buffer.num;
ret =
- vchiq_mmal_port_connect_tunnel(
- dev->instance,
- camera_port,
+ vchiq_mmal_port_connect_tunnel(dev->instance,
+ camera_port,
&encode_component->input[0]);
if (ret) {
v4l2_dbg(1, bcm2835_v4l2_debug,
@@ -1655,8 +1650,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0;
/* get the preview component ready */
- ret = vchiq_mmal_component_init(
- dev->instance, "ril.video_render",
+ ret = vchiq_mmal_component_init(dev->instance,
+ "ril.video_render",
&dev->component[COMP_PREVIEW]);
if (ret < 0)
goto unreg_camera;
@@ -1669,8 +1664,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
}
/* get the image encoder component ready */
- ret = vchiq_mmal_component_init(
- dev->instance, "ril.image_encode",
+ ret = vchiq_mmal_component_init(dev->instance,
+ "ril.image_encode",
&dev->component[COMP_IMAGE_ENCODE]);
if (ret < 0)
goto unreg_preview;
@@ -1731,15 +1726,13 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
unreg_vid_encoder:
pr_err("Cleanup: Destroy video encoder\n");
- vchiq_mmal_component_finalise(
- dev->instance,
- dev->component[COMP_VIDEO_ENCODE]);
+ vchiq_mmal_component_finalise(dev->instance,
+ dev->component[COMP_VIDEO_ENCODE]);
unreg_image_encoder:
pr_err("Cleanup: Destroy image encoder\n");
- vchiq_mmal_component_finalise(
- dev->instance,
- dev->component[COMP_IMAGE_ENCODE]);
+ vchiq_mmal_component_finalise(dev->instance,
+ dev->component[COMP_IMAGE_ENCODE]);
unreg_preview:
pr_err("Cleanup: Destroy video render\n");
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [Outreachy kernel] [PATCH] staging: vc04_services: fix warning of Logical continuations should be on the previous line
2019-10-11 21:27 [PATCH] staging: vc04_services: fix warning of Logical continuations should be on the previous line Jules Irenge
@ 2019-10-11 21:38 ` Julia Lawall
2019-10-12 15:00 ` Jules Irenge
0 siblings, 1 reply; 3+ messages in thread
From: Julia Lawall @ 2019-10-11 21:38 UTC (permalink / raw)
To: Jules Irenge
Cc: devel, f.fainelli, sbranden, mchehab+samsung, outreachy-kernel,
gregkh, linux-kernel, eric, daniela.mormocea,
bcm-kernel-feedback-list, wahrenst, dave.stevenson, rjui,
hverkuil-cisco, linux-arm-kernel, linux-rpi-kernel
On Fri, 11 Oct 2019, Jules Irenge wrote:
> Fix warning of logical continuations should be on the previous line.
> Issue detected by checkpatch tool.
There seem to be several changes mixed together in this patch.
Don't have a subject line that is identical to a line in the log message.
The subject line should be short.
Keeping the arguments of && on the same line, but breaking the line after
a == doesn't seem to be a good idea. It would be better to have the left
argument of == on one line and the right argument on another, if that is
needed.
julia
>
> Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
> ---
> .../bcm2835-camera/bcm2835-camera.c | 41 ++++++++-----------
> 1 file changed, 17 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> index d4d1e44b16b2..365bcd97e19d 100644
> --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> @@ -337,9 +337,8 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
> if (is_capturing(dev)) {
> v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
> "Grab another frame");
> - vchiq_mmal_port_parameter_set(
> - instance,
> - dev->capture.camera_port,
> + vchiq_mmal_port_parameter_set(instance,
> + dev->capture.camera_port,
> MMAL_PARAMETER_CAPTURE,
> &dev->capture.frame_count,
> sizeof(dev->capture.frame_count));
> @@ -392,9 +391,8 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
> is_capturing(dev)) {
> v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
> "Grab another frame as buffer has EOS");
> - vchiq_mmal_port_parameter_set(
> - instance,
> - dev->capture.camera_port,
> + vchiq_mmal_port_parameter_set(instance,
> + dev->capture.camera_port,
> MMAL_PARAMETER_CAPTURE,
> &dev->capture.frame_count,
> sizeof(dev->capture.frame_count));
> @@ -1090,8 +1088,7 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
>
> ret = vchiq_mmal_port_set_format(dev->instance, camera_port);
>
> - if (!ret
> - && camera_port ==
> + if (!ret && camera_port ==
> &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) {
> bool overlay_enabled =
> !!dev->component[COMP_PREVIEW]->enabled;
> @@ -1124,9 +1121,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
> dev->capture.timeperframe.numerator;
> ret = vchiq_mmal_port_set_format(dev->instance, preview_port);
> if (overlay_enabled) {
> - ret = vchiq_mmal_port_connect_tunnel(
> - dev->instance,
> - preview_port,
> + ret = vchiq_mmal_port_connect_tunnel(dev->instance,
> + preview_port,
> &dev->component[COMP_PREVIEW]->input[0]);
> if (!ret)
> ret = vchiq_mmal_port_enable(dev->instance,
> @@ -1154,9 +1150,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
> camera_port->recommended_buffer.num;
>
> ret =
> - vchiq_mmal_port_connect_tunnel(
> - dev->instance,
> - camera_port,
> + vchiq_mmal_port_connect_tunnel(dev->instance,
> + camera_port,
> &encode_component->input[0]);
> if (ret) {
> v4l2_dbg(1, bcm2835_v4l2_debug,
> @@ -1655,8 +1650,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
> dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0;
>
> /* get the preview component ready */
> - ret = vchiq_mmal_component_init(
> - dev->instance, "ril.video_render",
> + ret = vchiq_mmal_component_init(dev->instance,
> + "ril.video_render",
> &dev->component[COMP_PREVIEW]);
> if (ret < 0)
> goto unreg_camera;
> @@ -1669,8 +1664,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
> }
>
> /* get the image encoder component ready */
> - ret = vchiq_mmal_component_init(
> - dev->instance, "ril.image_encode",
> + ret = vchiq_mmal_component_init(dev->instance,
> + "ril.image_encode",
> &dev->component[COMP_IMAGE_ENCODE]);
> if (ret < 0)
> goto unreg_preview;
> @@ -1731,15 +1726,13 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
>
> unreg_vid_encoder:
> pr_err("Cleanup: Destroy video encoder\n");
> - vchiq_mmal_component_finalise(
> - dev->instance,
> - dev->component[COMP_VIDEO_ENCODE]);
> + vchiq_mmal_component_finalise(dev->instance,
> + dev->component[COMP_VIDEO_ENCODE]);
>
> unreg_image_encoder:
> pr_err("Cleanup: Destroy image encoder\n");
> - vchiq_mmal_component_finalise(
> - dev->instance,
> - dev->component[COMP_IMAGE_ENCODE]);
> + vchiq_mmal_component_finalise(dev->instance,
> + dev->component[COMP_IMAGE_ENCODE]);
>
> unreg_preview:
> pr_err("Cleanup: Destroy video render\n");
> --
> 2.21.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20191011212745.20262-1-jbi.octave%40gmail.com.
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Outreachy kernel] [PATCH] staging: vc04_services: fix warning of Logical continuations should be on the previous line
2019-10-11 21:38 ` [Outreachy kernel] " Julia Lawall
@ 2019-10-12 15:00 ` Jules Irenge
0 siblings, 0 replies; 3+ messages in thread
From: Jules Irenge @ 2019-10-12 15:00 UTC (permalink / raw)
To: Julia Lawall
Cc: devel, Jules Irenge, f.fainelli, sbranden, mchehab+samsung,
outreachy-kernel, gregkh, linux-kernel, eric, daniela.mormocea,
bcm-kernel-feedback-list, wahrenst, dave.stevenson, rjui,
hverkuil-cisco, linux-arm-kernel, linux-rpi-kernel
On Fri, 11 Oct 2019, Julia Lawall wrote:
>
>
> On Fri, 11 Oct 2019, Jules Irenge wrote:
>
>> Fix warning of logical continuations should be on the previous line.
>> Issue detected by checkpatch tool.
>
> There seem to be several changes mixed together in this patch.
>
> Don't have a subject line that is identical to a line in the log message.
> The subject line should be short.
>
> Keeping the arguments of && on the same line, but breaking the line after
> a == doesn't seem to be a good idea. It would be better to have the left
> argument of == on one line and the right argument on another, if that is
> needed.
>
> julia
>
Apology,
Yesterday was my bday, I was reckless.
I am resending now. Please do not hesitate to give me a feedback if
possible.
Thanks
Jules
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-10-12 15:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-11 21:27 [PATCH] staging: vc04_services: fix warning of Logical continuations should be on the previous line Jules Irenge
2019-10-11 21:38 ` [Outreachy kernel] " Julia Lawall
2019-10-12 15:00 ` Jules Irenge
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).