From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.5 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE, SPF_PASS,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 36A07ECE58F for ; Tue, 15 Oct 2019 19:40:20 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 008D920872 for ; Tue, 15 Oct 2019 19:40:19 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="FzqJaRWQ" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 008D920872 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=EkuIZgs8eO0Fk3433nL1JrEmzESNQAiB9e4Uqz9IZKA=; b=FzqJaRWQ0Rx7lC MWZNRCLyDiTXQX5hBzrMK9evB1w71OFFnh/IyzIeqONG2k/z5Z3qy6Rd5AN5fRJLQ3jL8K0lfw4iO 2B/ibHlc14lYOpZUtyVjXGqXt0Ua6cBP8Fc/nKDCjTOzViuPotGXp1f1+JqoZp4rAOLbr01w927zg QO4Wes0xVEDq25qon/pM28wiRXCIGgAwGFOvil6fiDB1Epj2ueJSANUz4FMtzalGuPVywnXQnCfBS NEV1mAExZ1MDfKYGX5cyP55rZHbTDzskC+L/99xHCxBzOcMePawrHzvuVVlzZHtFDReObWUC7o0iJ bCmHoYQjRloF6eBKAxIg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1iKSg1-0003e3-FP; Tue, 15 Oct 2019 19:40:13 +0000 Received: from mail-oi1-f195.google.com ([209.85.167.195]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1iKSfw-0003A6-8w for linux-arm-kernel@lists.infradead.org; Tue, 15 Oct 2019 19:40:10 +0000 Received: by mail-oi1-f195.google.com with SMTP id w65so17888929oiw.8 for ; Tue, 15 Oct 2019 12:40:08 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=f5z1afL3zYQYcRyoERZzjsi7/SiRTHqNbFhLxSAuGLs=; b=NXxzT1WD4TYAm4VD/L8V8pqIEQoL0NsdlpZ9Ewe4aGlLB02PoRKAh+gm/CXlpCu1QV Xz6HIlFVZdJjmSfnGMLOnMytdTec30ZuZrF5v6e9gLgpp6eWf7/hUx4qR1fxqOKY6prM lsTOQFXPgnj79x5hvyp7L3oLe3gMPu76R26VMy8++RHQlOq9+BPS/L9zh9UHgwkI78ol EMmcG/9k9Q0f0ydsr4VmTlfDhN2527fC2rpccm212r9XHgHaEL9kIyyK45gnxU7m/qLj Tr9vsMElkf6CMF+nLu6E3vnHIr05AJV2hoxwr7EUoXsbxFRUw5APIkZzMirNQ3cgTmRC /RWg== X-Gm-Message-State: APjAAAW85cvm8VWZPToEtWJb6i6NcmPP7EUYcUWKxMS0gQ1J9kBChGg6 uE+7tiQaHKuVjf7sRuG+Fw== X-Google-Smtp-Source: APXvYqxhtUbYR837DFUipAtkBDduyyeI6vaqqhzSUmhgED4fPdNsTQT8GLSgnjNjdjHJLBDi7GG+5w== X-Received: by 2002:a54:418c:: with SMTP id 12mr203382oiy.154.1571168407330; Tue, 15 Oct 2019 12:40:07 -0700 (PDT) Received: from localhost (24-155-109-49.dyn.grandenetworks.net. [24.155.109.49]) by smtp.gmail.com with ESMTPSA id b10sm1556470oic.55.2019.10.15.12.40.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 15 Oct 2019 12:40:06 -0700 (PDT) Date: Tue, 15 Oct 2019 14:40:06 -0500 From: Rob Herring To: Krzysztof Kozlowski Subject: Re: [PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema Message-ID: <20191015194006.GA3540@bogus> References: <20191004151414.8458-1-krzk@kernel.org> <20191004151414.8458-3-krzk@kernel.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20191004151414.8458-3-krzk@kernel.org> User-Agent: Mutt/1.10.1 (2018-07-13) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191015_124008_337561_7B58D4A0 X-CRM114-Status: GOOD ( 25.36 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, Maciej Falkowski , linux-serial@vger.kernel.org, David Airlie , Greg Kroah-Hartman , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Kukjin Kim , Daniel Vetter , Lee Jones , linux-arm-kernel@lists.infradead.org, Marek Szyprowski Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org On Fri, Oct 04, 2019 at 05:14:14PM +0200, Krzysztof Kozlowski wrote: > Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format > using json-schema. > > Signed-off-by: Krzysztof Kozlowski > --- > .../bindings/mfd/samsung,exynos5433-lpass.txt | 2 +- > .../bindings/serial/samsung_uart.txt | 58 ------- > .../bindings/serial/samsung_uart.yaml | 148 ++++++++++++++++++ > 3 files changed, 149 insertions(+), 59 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt > create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > index d759da606f75..30ea27c3936d 100644 > --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes: > UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices. > > Bindings of the sub-nodes are described in: > - ../serial/samsung_uart.txt > + ../serial/samsung_uart.yaml > ../sound/samsung-i2s.txt > ../dma/arm-pl330.txt > > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt > deleted file mode 100644 > index e85f37ec33f0..000000000000 > --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt > +++ /dev/null > @@ -1,58 +0,0 @@ > -* Samsung's UART Controller > - > -The Samsung's UART controller is used for interfacing SoC with serial > -communicaion devices. > - > -Required properties: > -- compatible: should be one of following: > - - "samsung,exynos4210-uart" - Exynos4210 SoC, > - - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC, > - - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC, > - - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC, > - - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC, > - - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC. > - > -- reg: base physical address of the controller and length of memory mapped > - region. > - > -- interrupts: a single interrupt signal to SoC interrupt controller, > - according to interrupt bindings documentation [1]. > - > -- clock-names: input names of clocks used by the controller: > - - "uart" - controller bus clock, > - - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...), > - according to SoC User's Manual (only N = 0 is allowedfor SoCs without > - internal baud clock mux). > -- clocks: phandles and specifiers for all clocks specified in "clock-names" > - property, in the same order, according to clock bindings documentation [2]. > - > -[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > -[2] Documentation/devicetree/bindings/clock/clock-bindings.txt > - > -Optional properties: > -- samsung,uart-fifosize: The fifo size supported by the UART channel > - > -Note: Each Samsung UART should have an alias correctly numbered in the > -"aliases" node, according to serialN format, where N is the port number > -(non-negative decimal integer) as specified by User's Manual of respective > -SoC. > - > -Example: > - aliases { > - serial0 = &uart0; > - serial1 = &uart1; > - serial2 = &uart2; > - }; > - > -Example: > - uart1: serial@7f005400 { > - compatible = "samsung,s3c6400-uart"; > - reg = <0x7f005400 0x100>; > - interrupt-parent = <&vic1>; > - interrupts = <6>; > - clock-names = "uart", "clk_uart_baud2", > - "clk_uart_baud3"; > - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, > - <&clocks SCLK_UART>; > - samsung,uart-fifosize = <16>; > - }; > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > new file mode 100644 > index 000000000000..276bea1c231a > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > @@ -0,0 +1,148 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/serial/samsung_uart.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung S3C, S5P and Exynos SoC UART Controller > + > +maintainers: > + - Krzysztof Kozlowski > + - Greg Kroah-Hartman > + > +description: |+ > + Each Samsung UART should have an alias correctly numbered in the "aliases" > + node, according to serialN format, where N is the port number (non-negative > + decimal integer) as specified by User's Manual of respective SoC. > + > +properties: > + compatible: > + items: > + - enum: > + - samsung,s3c2410-uart > + - samsung,s3c2412-uart > + - samsung,s3c2440-uart > + - samsung,s3c6400-uart > + - samsung,s5pv210-uart > + - samsung,exynos4210-uart > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 2 > + maxItems: 5 > + > + clock-names: > + description: | > + List of clock names: > + - "uart" - controller bus clock, > + - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...). Kind of redundant to list this here. > + N = 0 is allowed for SoCs without internal baud clock mux. You can add a description with the item: items: - pattern: '^clk_uart_baud[0-3]$' description: N = 0 is allowed for SoCs without internal baud clock mux. Or leave it here is fine too. > + minItems: 2 > + maxItems: 5 > + allOf: > + - uniqueItems: true You can drop this. > + - oneOf: > + - items: > + - const: uart > + - pattern: '^clk_uart_baud[0-3]$' > + - items: > + - const: uart > + - pattern: '^clk_uart_baud[0-3]$' > + - pattern: '^clk_uart_baud[0-3]$' > + - items: > + - const: uart > + - pattern: '^clk_uart_baud[0-3]$' > + - pattern: '^clk_uart_baud[0-3]$' > + - pattern: '^clk_uart_baud[0-3]$' > + - items: > + - const: uart > + - pattern: '^clk_uart_baud[0-3]$' > + - pattern: '^clk_uart_baud[0-3]$' > + - pattern: '^clk_uart_baud[0-3]$' > + - pattern: '^clk_uart_baud[0-3]$' You only need the last case. With 'minItems: 2', the additional items here will just be ignored. > + > + interrupts: > + minItems: 1 > + maxItems: 2 What is each item? > + > + samsung,uart-fifosize: > + description: The fifo size supported by the UART channel > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - enum: [16, 64, 256] > + > +required: > + - compatible > + - clocks > + - clock-names > + - interrupts > + - reg > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - samsung,s3c2410-uart > + - samsung,s5pv210-uart > + then: > + properties: > + clocks: > + minItems: 2 > + maxItems: 3 > + clock-names: > + minItems: 2 > + maxItems: 3 > + allOf: > + - uniqueItems: true > + - oneOf: > + - items: > + - const: uart > + - pattern: '^clk_uart_baud[0-1]$' > + - items: > + - const: uart > + - pattern: '^clk_uart_baud[0-1]$' > + - pattern: '^clk_uart_baud[0-1]$' Similar simplification can be done here. > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - samsung,exynos4210-uart > + then: > + properties: > + clocks: > + minItems: 2 > + maxItems: 2 > + clock-names: > + minItems: 2 > + maxItems: 2 > + allOf: > + - uniqueItems: true > + - items: > + - const: uart > + - const: clk_uart_baud0 > + > +examples: > + - | > + #include > + > + aliases { > + serial0 = &uart0; > + }; Drop this. It will cause a warning if we enforce 'aliases' to be at the root node. > + > + uart0: serial@7f005000 { > + compatible = "samsung,s3c6400-uart"; > + reg = <0x7f005000 0x100>; > + interrupt-parent = <&vic1>; > + interrupts = <5>; > + clock-names = "uart", "clk_uart_baud2", > + "clk_uart_baud3"; > + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, > + <&clocks SCLK_UART>; > + samsung,uart-fifosize = <16>; > + }; > -- > 2.17.1 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel