From: Mike Leach <mike.leach@linaro.org>
To: mike.leach@linaro.org, coresight@lists.linaro.org,
linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org
Cc: gregkh@linuxfoundation.org, suzuki.poulose@arm.com,
mathieu.poirier@linaro.org, corbet@lwn.net
Subject: [PATCH v3 01/11] coresight: etm4x: Fixes for ETM v4.4 architecture updates.
Date: Tue, 15 Oct 2019 22:19:54 +0100 [thread overview]
Message-ID: <20191015212004.24748-2-mike.leach@linaro.org> (raw)
In-Reply-To: <20191015212004.24748-1-mike.leach@linaro.org>
ETMv4.4 adds in support for tracing secure EL2 (per arch 8.x updates).
Patch accounts for this new capability.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
---
.../hwtracing/coresight/coresight-etm4x-sysfs.c | 12 ++++++------
drivers/hwtracing/coresight/coresight-etm4x.c | 5 ++++-
drivers/hwtracing/coresight/coresight-etm4x.h | 15 +++++++++++----
3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index 219c10eb752c..b6984be0c515 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -738,7 +738,7 @@ static ssize_t s_exlevel_vinst_show(struct device *dev,
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
struct etmv4_config *config = &drvdata->config;
- val = BMVAL(config->vinst_ctrl, 16, 19);
+ val = (config->vinst_ctrl & ETM_EXLEVEL_S_VICTLR_MASK) >> 16;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
@@ -754,8 +754,8 @@ static ssize_t s_exlevel_vinst_store(struct device *dev,
return -EINVAL;
spin_lock(&drvdata->spinlock);
- /* clear all EXLEVEL_S bits (bit[18] is never implemented) */
- config->vinst_ctrl &= ~(BIT(16) | BIT(17) | BIT(19));
+ /* clear all EXLEVEL_S bits */
+ config->vinst_ctrl &= ~(ETM_EXLEVEL_S_VICTLR_MASK);
/* enable instruction tracing for corresponding exception level */
val &= drvdata->s_ex_level;
config->vinst_ctrl |= (val << 16);
@@ -773,7 +773,7 @@ static ssize_t ns_exlevel_vinst_show(struct device *dev,
struct etmv4_config *config = &drvdata->config;
/* EXLEVEL_NS, bits[23:20] */
- val = BMVAL(config->vinst_ctrl, 20, 23);
+ val = (config->vinst_ctrl & ETM_EXLEVEL_NS_VICTLR_MASK) >> 20;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
@@ -789,8 +789,8 @@ static ssize_t ns_exlevel_vinst_store(struct device *dev,
return -EINVAL;
spin_lock(&drvdata->spinlock);
- /* clear EXLEVEL_NS bits (bit[23] is never implemented */
- config->vinst_ctrl &= ~(BIT(20) | BIT(21) | BIT(22));
+ /* clear EXLEVEL_NS bits */
+ config->vinst_ctrl &= ~(ETM_EXLEVEL_NS_VICTLR_MASK);
/* enable instruction tracing for corresponding exception level */
val &= drvdata->ns_ex_level;
config->vinst_ctrl |= (val << 20);
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 8f98701cadc5..efe120925f9d 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -648,6 +648,7 @@ static void etm4_init_arch_data(void *info)
* TRCARCHMAJ, bits[11:8] architecture major versin number
*/
drvdata->arch = BMVAL(etmidr1, 4, 11);
+ drvdata->config.arch = drvdata->arch;
/* maximum size of resources */
etmidr2 = readl_relaxed(drvdata->base + TRCIDR2);
@@ -799,6 +800,7 @@ static u64 etm4_get_ns_access_type(struct etmv4_config *config)
static u64 etm4_get_access_type(struct etmv4_config *config)
{
u64 access_type = etm4_get_ns_access_type(config);
+ u64 s_hyp = (config->arch & 0x0f) >= 0x4 ? ETM_EXLEVEL_S_HYP : 0;
/*
* EXLEVEL_S, bits[11:8], don't trace anything happening
@@ -806,7 +808,8 @@ static u64 etm4_get_access_type(struct etmv4_config *config)
*/
access_type |= (ETM_EXLEVEL_S_APP |
ETM_EXLEVEL_S_OS |
- ETM_EXLEVEL_S_HYP);
+ s_hyp |
+ ETM_EXLEVEL_S_MON);
return access_type;
}
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 546d790cb01b..b873df38e7d8 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -181,17 +181,22 @@
/* PowerDown Control Register bits */
#define TRCPDCR_PU BIT(3)
-/* secure state access levels */
+/* secure state access levels - TRCACATRn */
#define ETM_EXLEVEL_S_APP BIT(8)
#define ETM_EXLEVEL_S_OS BIT(9)
-#define ETM_EXLEVEL_S_NA BIT(10)
-#define ETM_EXLEVEL_S_HYP BIT(11)
-/* non-secure state access levels */
+#define ETM_EXLEVEL_S_HYP BIT(10)
+#define ETM_EXLEVEL_S_MON BIT(11)
+/* non-secure state access levels - TRCACATRn */
#define ETM_EXLEVEL_NS_APP BIT(12)
#define ETM_EXLEVEL_NS_OS BIT(13)
#define ETM_EXLEVEL_NS_HYP BIT(14)
#define ETM_EXLEVEL_NS_NA BIT(15)
+/* secure / non secure masks - TRCVICTLR, IDR3 */
+#define ETM_EXLEVEL_S_VICTLR_MASK GENMASK(19, 16)
+/* NS MON (EL3) mode never implemented */
+#define ETM_EXLEVEL_NS_VICTLR_MASK GENMASK(22, 20)
+
/**
* struct etmv4_config - configuration information related to an ETMv4
* @mode: Controls various modes supported by this ETM.
@@ -238,6 +243,7 @@
* @vmid_mask0: VM ID comparator mask for comparator 0-3.
* @vmid_mask1: VM ID comparator mask for comparator 4-7.
* @ext_inp: External input selection.
+ * @arch: ETM architecture version (for arch dependent config).
*/
struct etmv4_config {
u32 mode;
@@ -280,6 +286,7 @@ struct etmv4_config {
u32 vmid_mask0;
u32 vmid_mask1;
u32 ext_inp;
+ u8 arch;
};
/**
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-15 21:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 21:19 [PATCH v3 00/11] coresight: etm4x: Fixes and updates for sysfs API Mike Leach
2019-10-15 21:19 ` Mike Leach [this message]
2019-10-17 17:55 ` [PATCH v3 01/11] coresight: etm4x: Fixes for ETM v4.4 architecture updates Mathieu Poirier
2019-10-15 21:19 ` [PATCH v3 02/11] coresight: etm4x: Fix input validation for sysfs Mike Leach
2019-10-17 17:56 ` Mathieu Poirier
2019-10-15 21:19 ` [PATCH v3 03/11] coresight: etm4x: Add missing API to set EL match on address filters Mike Leach
2019-10-17 18:00 ` Mathieu Poirier
2019-10-17 19:25 ` Mathieu Poirier
2019-10-15 21:19 ` [PATCH v3 04/11] coresight: etm4x: Fix issues with start-stop logic Mike Leach
2019-10-15 21:19 ` [PATCH v3 05/11] coresight: etm4x: Improve usability of sysfs - include/exclude addr Mike Leach
2019-10-15 21:19 ` [PATCH v3 06/11] coresight: etm4x: Improve usability of sysfs - CID and VMID masks Mike Leach
2019-10-15 21:20 ` [PATCH v3 07/11] coresight: etm4x: Add view comparator settings API to sysfs Mike Leach
2019-10-15 21:20 ` [PATCH v3 08/11] coresight: etm4x: Add missing single-shot control " Mike Leach
2019-10-17 20:17 ` Mathieu Poirier
2019-10-15 21:20 ` [PATCH v3 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added Mike Leach
2019-10-18 16:16 ` Mathieu Poirier
2019-10-15 21:20 ` [PATCH v3 10/11] coresight: docs: Create common sub-directory for coresight trace Mike Leach
2019-10-18 16:20 ` Mathieu Poirier
2019-10-18 17:31 ` Mathieu Poirier
2019-10-24 10:46 ` Mike Leach
2019-10-15 21:20 ` [PATCH v3 11/11] coresight: etm4x: docs: Adds detailed document for programming etm4x Mike Leach
2019-10-18 17:27 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191015212004.24748-2-mike.leach@linaro.org \
--to=mike.leach@linaro.org \
--cc=corbet@lwn.net \
--cc=coresight@lists.linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).