From: Mike Leach <mike.leach@linaro.org>
To: mike.leach@linaro.org, coresight@lists.linaro.org,
linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org
Cc: gregkh@linuxfoundation.org, suzuki.poulose@arm.com,
stable <stable@vger.kernel.org>,
mathieu.poirier@linaro.org, corbet@lwn.net
Subject: [PATCH v3 02/11] coresight: etm4x: Fix input validation for sysfs.
Date: Tue, 15 Oct 2019 22:19:55 +0100 [thread overview]
Message-ID: <20191015212004.24748-3-mike.leach@linaro.org> (raw)
In-Reply-To: <20191015212004.24748-1-mike.leach@linaro.org>
A number of issues are fixed relating to sysfs input validation:-
1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
---
.../coresight/coresight-etm4x-sysfs.c | 21 ++++++++++++-------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index b6984be0c515..cc8156318018 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -652,10 +652,13 @@ static ssize_t cyc_threshold_store(struct device *dev,
if (kstrtoul(buf, 16, &val))
return -EINVAL;
+
+ /* mask off max threshold before checking min value */
+ val &= ETM_CYC_THRESHOLD_MASK;
if (val < drvdata->ccitmin)
return -EINVAL;
- config->ccctlr = val & ETM_CYC_THRESHOLD_MASK;
+ config->ccctlr = val;
return size;
}
static DEVICE_ATTR_RW(cyc_threshold);
@@ -686,14 +689,16 @@ static ssize_t bb_ctrl_store(struct device *dev,
return -EINVAL;
if (!drvdata->nr_addr_cmp)
return -EINVAL;
+
/*
- * Bit[7:0] selects which address range comparator is used for
- * branch broadcast control.
+ * Bit[8] controls include(1) / exclude(0), bits[0-7] select
+ * individual range comparators. If include then at least 1
+ * range must be selected.
*/
- if (BMVAL(val, 0, 7) > drvdata->nr_addr_cmp)
+ if ((val & BIT(8)) && (BMVAL(val, 0, 7) == 0))
return -EINVAL;
- config->bb_ctrl = val;
+ config->bb_ctrl = val & GENMASK(8, 0);
return size;
}
static DEVICE_ATTR_RW(bb_ctrl);
@@ -1324,8 +1329,8 @@ static ssize_t seq_event_store(struct device *dev,
spin_lock(&drvdata->spinlock);
idx = config->seq_idx;
- /* RST, bits[7:0] */
- config->seq_ctrl[idx] = val & 0xFF;
+ /* Seq control has two masks B[15:8] F[7:0] */
+ config->seq_ctrl[idx] = val & 0xFFFF;
spin_unlock(&drvdata->spinlock);
return size;
}
@@ -1580,7 +1585,7 @@ static ssize_t res_ctrl_store(struct device *dev,
if (idx % 2 != 0)
/* PAIRINV, bit[21] */
val &= ~BIT(21);
- config->res_ctrl[idx] = val;
+ config->res_ctrl[idx] = val & GENMASK(21, 0);
spin_unlock(&drvdata->spinlock);
return size;
}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-15 21:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 21:19 [PATCH v3 00/11] coresight: etm4x: Fixes and updates for sysfs API Mike Leach
2019-10-15 21:19 ` [PATCH v3 01/11] coresight: etm4x: Fixes for ETM v4.4 architecture updates Mike Leach
2019-10-17 17:55 ` Mathieu Poirier
2019-10-15 21:19 ` Mike Leach [this message]
2019-10-17 17:56 ` [PATCH v3 02/11] coresight: etm4x: Fix input validation for sysfs Mathieu Poirier
2019-10-15 21:19 ` [PATCH v3 03/11] coresight: etm4x: Add missing API to set EL match on address filters Mike Leach
2019-10-17 18:00 ` Mathieu Poirier
2019-10-17 19:25 ` Mathieu Poirier
2019-10-15 21:19 ` [PATCH v3 04/11] coresight: etm4x: Fix issues with start-stop logic Mike Leach
2019-10-15 21:19 ` [PATCH v3 05/11] coresight: etm4x: Improve usability of sysfs - include/exclude addr Mike Leach
2019-10-15 21:19 ` [PATCH v3 06/11] coresight: etm4x: Improve usability of sysfs - CID and VMID masks Mike Leach
2019-10-15 21:20 ` [PATCH v3 07/11] coresight: etm4x: Add view comparator settings API to sysfs Mike Leach
2019-10-15 21:20 ` [PATCH v3 08/11] coresight: etm4x: Add missing single-shot control " Mike Leach
2019-10-17 20:17 ` Mathieu Poirier
2019-10-15 21:20 ` [PATCH v3 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added Mike Leach
2019-10-18 16:16 ` Mathieu Poirier
2019-10-15 21:20 ` [PATCH v3 10/11] coresight: docs: Create common sub-directory for coresight trace Mike Leach
2019-10-18 16:20 ` Mathieu Poirier
2019-10-18 17:31 ` Mathieu Poirier
2019-10-24 10:46 ` Mike Leach
2019-10-15 21:20 ` [PATCH v3 11/11] coresight: etm4x: docs: Adds detailed document for programming etm4x Mike Leach
2019-10-18 17:27 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191015212004.24748-3-mike.leach@linaro.org \
--to=mike.leach@linaro.org \
--cc=corbet@lwn.net \
--cc=coresight@lists.linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=stable@vger.kernel.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).