From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <festevam@gmail.com>,
linux-kernel@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
Chris Healy <cphealy@gmail.com>,
Lucas Stach <l.stach@pengutronix.de>
Subject: [PATCH 2/3] ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-names
Date: Mon, 21 Oct 2019 21:04:59 -0700 [thread overview]
Message-ID: <20191022040500.18548-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20191022040500.18548-1-andrew.smirnov@gmail.com>
According to Documentation/devicetree/bindings/iio/accel/mma8452.txt,
the correct interrupt-names are "INT1" and "INT2", so fix them
accordingly.
While at it, modify the node to only specify "INT2" since providing
two interrupts is not necessary or useful (the driver will only use
one).
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[andrew.smirnov@gmail.com modified the patch to drop INT1]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: linux-kernel@vger.kernel.org
---
Original patch from Fabio can be seen here:
https://lore.kernel.org/linux-arm-kernel/20191010125300.2822-1-festevam@gmail.com/
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 8d46f7b2722b..a8c86e621b49 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -358,8 +358,8 @@
compatible = "fsl,mma8451";
reg = <0x1c>;
interrupt-parent = <&gpio1>;
- interrupt-names = "int1", "int2";
- interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT2";
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
};
hpa2: amp@60 {
@@ -849,7 +849,6 @@
&iomuxc {
pinctrl_accel: accelgrp {
fsl,pins = <
- MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000
>;
};
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-22 4:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-22 4:04 [PATCH 1/3] ARM: dts: imx6qdl-zii-rdu2: Drop GPIO_ACTIVE_LOW form reg_5p0v_user_usb Andrey Smirnov
2019-10-22 4:04 ` Andrey Smirnov [this message]
2019-10-22 16:04 ` [PATCH 2/3] ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-names Lucas Stach
2019-10-28 6:20 ` Shawn Guo
2019-10-22 4:05 ` [PATCH 3/3] ARM: dts: imx6qdl-zii-rdu2: Specify supplies for accelerometer Andrey Smirnov
2019-10-22 16:03 ` Lucas Stach
2019-10-28 6:20 ` Shawn Guo
2019-10-22 16:01 ` [PATCH 1/3] ARM: dts: imx6qdl-zii-rdu2: Drop GPIO_ACTIVE_LOW form reg_5p0v_user_usb Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191022040500.18548-2-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=cphealy@gmail.com \
--cc=festevam@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).