public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	kernel@pengutronix.de, Markus Niebel <Markus.Niebel@tq-group.com>
Subject: Re: [PATCH 1/3] ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM
Date: Sat, 26 Oct 2019 17:34:00 +0800	[thread overview]
Message-ID: <20191026093356.GE14401@dragon> (raw)
In-Reply-To: <20191011143651.6424-1-p.zabel@pengutronix.de>

On Fri, Oct 11, 2019 at 04:36:49PM +0200, Philipp Zabel wrote:
> From: Markus Niebel <Markus.Niebel@tq-group.com>
> 
> Add device trees for TQMa6S, TQMa6Q, and TQMa6QP embedded modules.
> The A and B SoM variants are for hardware revisions that differ in
> how the I2C devices are connected. For details, see [1].

It looks like a perfect case to be handled by DT overlay.  Did you
consider of using that?

> 
> This is a combination of the patches
>   "arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard",
>   "arm: dt: tqma6: add spi with spi nor flash on SOM",
>   "arm: dt: add basic support for tqma6qp on mba6", and
>   "arm: dt: imx6qdl-tqma6: use generic jedec,spi-nor"
> from the TQMa6x BSP, with the MBa6 specific parts removed.
> 
> [1] https://support.tq-group.com/en/arm/tqma6x/linux/ptxdist/overview
> 
> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
> [p.zabel@pengutronix.de: merged patches from TQMa6x BSP REV.0114,
>  separated MBa6 DTs, fixed checkpatch and dtbs_check warnings,
>  added no-sd(io) properties to eMMC, added SPDX license identifiers
>  and commit message]
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
>  arch/arm/boot/dts/imx6dl-tqma6a.dtsi  |  17 +++
>  arch/arm/boot/dts/imx6dl-tqma6b.dtsi  |  17 +++
>  arch/arm/boot/dts/imx6q-tqma6a.dtsi   |  17 +++
>  arch/arm/boot/dts/imx6q-tqma6b.dtsi   |  16 ++
>  arch/arm/boot/dts/imx6qdl-tqma6.dtsi  | 202 ++++++++++++++++++++++++++
>  arch/arm/boot/dts/imx6qdl-tqma6a.dtsi |  29 ++++
>  arch/arm/boot/dts/imx6qdl-tqma6b.dtsi |  29 ++++
>  arch/arm/boot/dts/imx6qp-tqma6b.dtsi  |  17 +++
>  8 files changed, 344 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-tqma6a.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6dl-tqma6b.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6q-tqma6a.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6q-tqma6b.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6qdl-tqma6.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6qp-tqma6b.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
> new file mode 100644
> index 000000000000..b45ab3325dc4
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
> + */
> +
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tqma6a.dtsi"
> +#include "imx6qdl-tqma6.dtsi"
> +
> +/ {
> +	memory@10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x20000000>;
> +	};
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
> new file mode 100644
> index 000000000000..4b0e6b22466a
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
> + */
> +
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tqma6b.dtsi"
> +#include "imx6qdl-tqma6.dtsi"
> +
> +/ {
> +	memory@10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x20000000>;
> +	};
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
> new file mode 100644
> index 000000000000..d22eaeda9863
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
> + */
> +
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tqma6a.dtsi"
> +#include "imx6qdl-tqma6.dtsi"
> +
> +/ {
> +	memory@10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x40000000>;
> +	};
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
> new file mode 100644
> index 000000000000..da6d406b5e89
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + */
> +
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tqma6b.dtsi"
> +#include "imx6qdl-tqma6.dtsi"
> +
> +/ {
> +	memory@10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x40000000>;
> +	};
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
> new file mode 100644
> index 000000000000..c0e2a03624f9
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
> + */
> +
> +/ {
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "supply-3p3v";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +};
> +
> +&ecspi1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1>;
> +	fsl,spi-num-chipselects = <1>;

Obsolete property.

> +	cs-gpios = <&gpio3 19 0>;

GPIO_ACTIVE_HIGH

> +	status = "okay";
> +
> +	flash: m25p80@0 {

Node name should be generic, while label can be specific.

> +		status = "okay";

Not really needed.

> +		compatible = "jedec,spi-nor";
> +		spi-max-frequency = <50000000>;
> +		reg = <0>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		m25p,fast-read;
> +	};
> +};
> +
> +&iomuxc {
> +	tqma6 {

Drop this container node.

> +		pinctrl_ecspi1: ecspi1grp {
> +			fsl,pins = <
> +				/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
> +				MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
> +				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
> +				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
> +				 /* eCSPI1 SS1 */
> +				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
> +			>;
> +		};
> +
> +		pinctrl_i2c1_tqma6: i2c1-tqma6grp {

The '_tqma6' suffix isn't really useful.

> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
> +				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
> +			>;
> +		};
> +
> +		pinctrl_i2c3_tqma6: i2c3-tqma6grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
> +				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
> +			>;
> +		};
> +
> +		pinctrl_pmic: pmicgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
> +			>;
> +		};
> +
> +		pinctrl_usdhc3: usdhc3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> +			>;
> +		};
> +	};
> +};
> +
> +&pmic {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <10 8>;

IRQ_TYPE_LEVEL_LOW

> +
> +		regulators {
> +			reg_vddcore: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_vddsoc: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_gen_3v3: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_ddr_1v5a: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_ddr_1v5b: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_5v_600mA: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_snvs_3v: vsnvs {
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_vrefddr: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			reg_vgen1_1v5: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				/* not used */
> +			};
> +
> +			reg_vgen2_1v2_eth: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_vgen3_2v8: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_vgen4_1v8: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_vgen5_1v8_eth: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			reg_vgen6_3v3: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +};
> +
> +/* eMMC */
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	vmmc-supply = <&reg_3p3v>;
> +	non-removable;
> +	disable-wp;
> +	no-sd;
> +	no-sdio;
> +	bus-width = <8>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	mmccard: mmccard@0 {
> +		reg = <0>;
> +		compatible = "mmc-card";
> +		broken-hpi;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
> new file mode 100644
> index 000000000000..a31bf04884d2
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
> + */
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1_tqma6>;
> +	clock-frequency = <100000>;
> +	status = "okay";
> +
> +	pmic: pf0100@8 {

Node name should be generic, while label can be specific.

> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +	};
> +
> +	sensor0: lm75@48 {

Ditto

> +		compatible = "lm75";
> +		reg = <0x48>;
> +	};
> +
> +	eeprom0: m24c64@50 {

Ditto

Shawn

> +		compatible = "st,24c64", "atmel,24c64";
> +		reg = <0x50>;
> +		pagesize = <32>;
> +	};
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
> new file mode 100644
> index 000000000000..9a7c8d21cec2
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
> + */
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3_tqma6>;
> +	clock-frequency = <100000>;
> +	status = "okay";
> +
> +	pmic: pf0100@8 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +	};
> +
> +	sensor0: lm75@48 {
> +		compatible = "lm75";
> +		reg = <0x48>;
> +	};
> +
> +	eeprom0: m24c64@50 {
> +		compatible = "st,24c64", "atmel,24c64";
> +		reg = <0x50>;
> +		pagesize = <32>;
> +	};
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
> new file mode 100644
> index 000000000000..4e7e7050da43
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + */
> +
> +#include "imx6q.dtsi"
> +#include "imx6qp.dtsi"
> +#include "imx6qdl-tqma6b.dtsi"
> +#include "imx6qdl-tqma6.dtsi"
> +
> +/ {
> +	memory@10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x40000000>;
> +	};
> +};
> +
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-10-26  9:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-11 14:36 [PATCH 1/3] ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM Philipp Zabel
2019-10-11 14:36 ` [PATCH 2/3] ARM: dts: imx6qdl: add MBa6 mainboard with TQMa6{S, Q, QP} SoMs Philipp Zabel
2019-10-11 14:36 ` [PATCH 3/3] dt-bindings: arm: fsl: Add TQ TQMa6{S,Q,QP} on MBa6x Philipp Zabel
2019-10-15 22:48   ` Rob Herring
2019-10-26  9:34 ` Shawn Guo [this message]
2019-10-28 14:28   ` [PATCH 1/3] ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM Philipp Zabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191026093356.GE14401@dragon \
    --to=shawnguo@kernel.org \
    --cc=Markus.Niebel@tq-group.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox