[PATCH 1/4] arm64: dts: zii-ultra: Fix regulator-vsd-3v3's vin-supply

[PATCH 1/4] arm64: dts: zii-ultra: Fix regulator-vsd-3v3's vin-supply

[Andrey Smirnov]

Regulator-vsd-3v3 is supplied via GEN_3V3 rail which is an output of
an "always on" load switch supplied by 3V3_MAIN. GEN_3V3 is also used
as vin-supply by a number of peripherals, so adding it also allows us
to follow the schematic more closely.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 087b5b6ebe89..5d7a8f09f1ab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -68,11 +68,20 @@
 		regulator-always-on;
 	};
 
+	reg_gen_3p3: regulator-gen-3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_3p3_main>;
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	reg_usdhc2_vmmc: regulator-vsd-3v3 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_usdhc2>;
 		compatible = "regulator-fixed";
-		vin-supply = <&reg_3p3_main>;
+		vin-supply = <&reg_gen_3p3>;
 		regulator-name = "3V3_SD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] arm64: dts: zii-ultra: Fix regulator-3p3-main's name

[Andrey Smirnov]

It's 3V3_MAIN, not 3V3V_MAIN on schematic. Fix it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 5d7a8f09f1ab..21eb52341ba8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -62,7 +62,7 @@
 	reg_3p3_main: regulator-3p3-main {
 		compatible = "regulator-fixed";
 		vin-supply = <&reg_12p0_main>;
-		regulator-name = "3V3V_MAIN";
+		regulator-name = "3V3_MAIN";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/4] arm64: dts: zii-ultra: Add node for accelerometer

[Andrey Smirnov]

Add I2C node for accelerometer present on both Zest and RMB3 boards.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: linux-kernel@vger.kernel.org
---
 .../boot/dts/freescale/imx8mq-zii-ultra.dtsi   | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 21eb52341ba8..8395c5a73ba6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -262,6 +262,18 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	accel@1c {
+		compatible = "fsl,mma8451";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x1c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT2";
+		vdd-supply = <&reg_gen_3p3>;
+		vddio-supply = <&reg_gen_3p3>;
+	};
+
 	ucs1002: charger@32 {
 		compatible = "microchip,ucs1002";
 		pinctrl-names = "default";
@@ -522,6 +534,12 @@
 };
 
 &iomuxc {
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] arm64: dts: zii-ultra: Add node for accelerometer

[Shawn Guo]

On Tue, Oct 15, 2019 at 08:26:53AM -0700, Andrey Smirnov wrote:
> Add I2C node for accelerometer present on both Zest and RMB3 boards.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org,
> Cc: linux-kernel@vger.kernel.org
> ---
>  .../boot/dts/freescale/imx8mq-zii-ultra.dtsi   | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> index 21eb52341ba8..8395c5a73ba6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> @@ -262,6 +262,18 @@
>  	pinctrl-0 = <&pinctrl_i2c1>;
>  	status = "okay";
>  
> +	accel@1c {

s/accel/accelerometer

I fixed it up and applied the series.

Shawn

> +		compatible = "fsl,mma8451";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_accel>;
> +		reg = <0x1c>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "INT2";
> +		vdd-supply = <&reg_gen_3p3>;
> +		vddio-supply = <&reg_gen_3p3>;
> +	};
> +
>  	ucs1002: charger@32 {
>  		compatible = "microchip,ucs1002";
>  		pinctrl-names = "default";
> @@ -522,6 +534,12 @@
>  };
>  
>  &iomuxc {
> +	pinctrl_accel: accelgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
> +		>;
> +	};
> +
>  	pinctrl_fec1: fec1grp {
>  		fsl,pins = <
>  			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
> -- 
> 2.21.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] arm64: dts: zii-ultra: Add node for accelerometer

[Andrey Smirnov]

On Sat, Oct 26, 2019 at 4:55 AM Shawn Guo <shawnguo@kernel.org> wrote:
>
> On Tue, Oct 15, 2019 at 08:26:53AM -0700, Andrey Smirnov wrote:
> > Add I2C node for accelerometer present on both Zest and RMB3 boards.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > Cc: Fabio Estevam <festevam@gmail.com>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: linux-arm-kernel@lists.infradead.org,
> > Cc: linux-kernel@vger.kernel.org
> > ---
> >  .../boot/dts/freescale/imx8mq-zii-ultra.dtsi   | 18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> > index 21eb52341ba8..8395c5a73ba6 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> > @@ -262,6 +262,18 @@
> >       pinctrl-0 = <&pinctrl_i2c1>;
> >       status = "okay";
> >
> > +     accel@1c {
>
> s/accel/accelerometer
>
> I fixed it up and applied the series.
>

I'm fine with that change, but FYI, I originally had it as
"accelerometer', but changed to "accel" to match the name in DT for
RDU2.

Thanks,
Andrey Smirnov

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] arm64: dts: zii-ultra: Add node for accelerometer

[Shawn Guo]

On Sat, Oct 26, 2019 at 11:54:13AM -0700, Andrey Smirnov wrote:
> On Sat, Oct 26, 2019 at 4:55 AM Shawn Guo <shawnguo@kernel.org> wrote:
> >
> > On Tue, Oct 15, 2019 at 08:26:53AM -0700, Andrey Smirnov wrote:
> > > Add I2C node for accelerometer present on both Zest and RMB3 boards.
> > >
> > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > > Cc: Fabio Estevam <festevam@gmail.com>
> > > Cc: Chris Healy <cphealy@gmail.com>
> > > Cc: Lucas Stach <l.stach@pengutronix.de>
> > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > Cc: linux-arm-kernel@lists.infradead.org,
> > > Cc: linux-kernel@vger.kernel.org
> > > ---
> > >  .../boot/dts/freescale/imx8mq-zii-ultra.dtsi   | 18 ++++++++++++++++++
> > >  1 file changed, 18 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> > > index 21eb52341ba8..8395c5a73ba6 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
> > > @@ -262,6 +262,18 @@
> > >       pinctrl-0 = <&pinctrl_i2c1>;
> > >       status = "okay";
> > >
> > > +     accel@1c {
> >
> > s/accel/accelerometer
> >
> > I fixed it up and applied the series.
> >
> 
> I'm fine with that change, but FYI, I originally had it as
> "accelerometer', but changed to "accel" to match the name in DT for
> RDU2.

We should change RDU2 instead, IMO.

Shawn

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/4] arm64: dts: zii-ultra: Add node for switch watchdog

[Andrey Smirnov]

Add I2C node for switch watchdog present on both Zest and RMB3 boards.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 8395c5a73ba6..e058ad908b2e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -400,6 +400,11 @@
 		reg = <0x2c>;
 		reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	};
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
 };
 
 &i2c4 {
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel