Re: [PATCH v4] clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Oct 28, 2019 at 08:07:59AM +0000, Fancy Fang wrote:
> The mipi pll clock comes from the MIPI PHY PLL output, so
> it should not be a fixed clock.
> 
> MIPI PHY PLL is in the MIPI DSI space, and it is used as
> the bit clock for transferring the pixel data out and its
> output clock is configured according to the display mode.
> 
> So it should be used only for MIPI DSI and not be exported
> out for other usages.
> 
> Signed-off-by: Fancy Fang <chen.fang@nxp.com>
> ---
> ChangeLog v3->v4:
>  * Add some comments to 'IMX7ULP_CLK_MIPI_PLL'
>    clock.
> 
>  Documentation/devicetree/bindings/clock/imx7ulp-clock.txt | 1 -
>  drivers/clk/imx/clk-imx7ulp.c                             | 3 +--
>  include/dt-bindings/clock/imx7ulp-clock.h                 | 6 ++++++
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt
> index a4f8cd478f92..93d89adb7afe 100644
> --- a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt
> @@ -82,7 +82,6 @@ pcc2: pcc2@403f0000 {
>  		 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
>  		 <&scg1 IMX7ULP_CLK_UPLL>,
>  		 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
> -		 <&scg1 IMX7ULP_CLK_MIPI_PLL>,
>  		 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
>  		 <&scg1 IMX7ULP_CLK_ROSC>,
>  		 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
> diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
> index 2022d9bead91..459b120b71d5 100644
> --- a/drivers/clk/imx/clk-imx7ulp.c
> +++ b/drivers/clk/imx/clk-imx7ulp.c
> @@ -28,7 +28,7 @@ static const char * const scs_sels[]		= { "dummy", "sosc", "sirc", "firc", "dumm
>  static const char * const ddr_sels[]		= { "apll_pfd_sel", "upll", };
>  static const char * const nic_sels[]		= { "firc", "ddr_clk", };
>  static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
> -static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
> +static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
>  static const char * const arm_sels[]		= { "divcore", "dummy", "dummy", "hsrun_divcore", };
>  
>  /* used by sosc/sirc/firc/ddr/spll/apll dividers */
> @@ -75,7 +75,6 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
>  	clks[IMX7ULP_CLK_SOSC]		= imx_obtain_fixed_clk_hw(np, "sosc");
>  	clks[IMX7ULP_CLK_SIRC]		= imx_obtain_fixed_clk_hw(np, "sirc");
>  	clks[IMX7ULP_CLK_FIRC]		= imx_obtain_fixed_clk_hw(np, "firc");
> -	clks[IMX7ULP_CLK_MIPI_PLL]	= imx_obtain_fixed_clk_hw(np, "mpll");
>  	clks[IMX7ULP_CLK_UPLL]		= imx_obtain_fixed_clk_hw(np, "upll");
>  
>  	/* SCG1 */
> diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h
> index 6f66f9005c81..e9ef62f211fe 100644
> --- a/include/dt-bindings/clock/imx7ulp-clock.h
> +++ b/include/dt-bindings/clock/imx7ulp-clock.h
> @@ -49,7 +49,13 @@
>  #define IMX7ULP_CLK_NIC1_DIV		36
>  #define IMX7ULP_CLK_NIC1_BUS_DIV	37
>  #define IMX7ULP_CLK_NIC1_EXT_DIV	38
> +
> +/* mpll clock is a special clock comes from
> + * mipi DPHY PLL and should be used only for
> + * mipi dsi instead of any other peripheral.
> + */
>  #define IMX7ULP_CLK_MIPI_PLL		39
> +

The point of comment is to tell that the clock ID is unsupported and
shouldn't be used in DT.

I reworded the comment and applied the patch.

Shawn

>  #define IMX7ULP_CLK_SIRC		40
>  #define IMX7ULP_CLK_SOSC_BUS_CLK	41
>  #define IMX7ULP_CLK_FIRC_BUS_CLK	42
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel