[PATCH v2] arm64: dts: allwinner: bluetooth for Emlid Neutis N5

Georgii Staroselskii
2019-11-01T09:43:53Z

The Emlid Neutis N5 board has AP6212 BT+WiFi chip. This patch is in
line with 8558c6e21ceb ("ARM: dts: sun8i: h3: bluetooth for Banana Pi
M2 Zero board") and other commits that add Bluetooth support for
similar boards.

Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
---
.../arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index 82f4b44..5bec574 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -23,6 +23,8 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};

@@ -56,5 +58,16 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vcc3v3>;
+ vddio-supply = <&reg_vcc3v3>;
+ shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+ device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ };
};
--
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org