From: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org, linux-mediatek@lists.infradead.org
Cc: dcastagna@chromium.org, matthias.bgg@gmail.com,
mcasas@chromium.org, Sean Paul <seanpaul@chromium.org>,
p.zabel@pengutronix.de, frkoenig@chromium.org,
ck.hu@mediatek.com, linux-arm-kernel@lists.infradead.org,
markyacoub@google.com
Subject: [PATCH v2 4/7] drm/mediatek: Plumb supported rotation values from components to plane init
Date: Tue, 5 Nov 2019 16:10:21 -0500 [thread overview]
Message-ID: <20191105211034.123937-5-sean@poorly.run> (raw)
In-Reply-To: <20191105211034.123937-1-sean@poorly.run>
From: Sean Paul <seanpaul@chromium.org>
This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.
No functional changes in this patch.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 4 +++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 ++++++++++
drivers/gpu/drm/mediatek/mtk_drm_plane.c | 12 +++++++++++-
drivers/gpu/drm/mediatek/mtk_drm_plane.h | 4 +++-
4 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 04e7e4bdbdb5..f80a8ba75977 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -600,13 +600,15 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
int comp_idx, int pipe)
{
int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[comp_idx];
int i, ret;
for (i = 0; i < num_planes; i++) {
ret = mtk_plane_init(drm_dev,
&mtk_crtc->planes[mtk_crtc->layer_nr],
BIT(pipe),
- mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+ mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
+ mtk_ddp_comp_supported_rotations(comp));
if (ret)
return ret;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 3de371e28bdf..2f1e9e75b8da 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -77,6 +77,7 @@ struct mtk_ddp_comp_funcs {
void (*stop)(struct mtk_ddp_comp *comp);
void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
void (*disable_vblank)(struct mtk_ddp_comp *comp);
+ unsigned int (*supported_rotations)(struct mtk_ddp_comp *comp);
unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
@@ -133,6 +134,15 @@ static inline void mtk_ddp_comp_disable_vblank(struct mtk_ddp_comp *comp)
comp->funcs->disable_vblank(comp);
}
+static inline
+unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
+{
+ if (comp->funcs && comp->funcs->supported_rotations)
+ return comp->funcs->supported_rotations(comp);
+
+ return 0;
+}
+
static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
{
if (comp->funcs && comp->funcs->layer_nr)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 58b02fffe321..cd7c97eb7ee6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -138,6 +138,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
state->pending.y = plane->state->dst.y1;
state->pending.width = drm_rect_width(&plane->state->dst);
state->pending.height = drm_rect_height(&plane->state->dst);
+ state->pending.rotation = plane->state->rotation;
wmb(); /* Make sure the above parameters are set before update */
state->pending.dirty = true;
}
@@ -160,7 +161,8 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
};
int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
- unsigned long possible_crtcs, enum drm_plane_type type)
+ unsigned long possible_crtcs, enum drm_plane_type type,
+ unsigned int supported_rotations)
{
int err;
@@ -172,6 +174,14 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
return err;
}
+ if (supported_rotations & ~DRM_MODE_ROTATE_0) {
+ err = drm_plane_create_rotation_property(plane,
+ DRM_MODE_ROTATE_0,
+ supported_rotations);
+ if (err)
+ DRM_INFO("Create rotation property failed\n");
+ }
+
drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 6f842df722c7..760885e35b27 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
unsigned int y;
unsigned int width;
unsigned int height;
+ unsigned int rotation;
bool dirty;
};
@@ -35,6 +36,7 @@ to_mtk_plane_state(struct drm_plane_state *state)
}
int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
- unsigned long possible_crtcs, enum drm_plane_type type);
+ unsigned long possible_crtcs, enum drm_plane_type type,
+ unsigned int supported_rotations);
#endif
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-05 21:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-05 21:10 [PATCH v2 0/7] drm/mediatek: Refactor plane init/check and support rotation Sean Paul
2019-11-05 21:10 ` [PATCH v2 1/7] drm/mediatek: Refactor plane init Sean Paul
2019-11-05 21:10 ` [PATCH v2 2/7] drm/mediatek: Add helper to get component for a plane Sean Paul
2019-11-05 21:10 ` [PATCH v2 3/7] drm/mediatek: Add plumbing for layer_check hook Sean Paul
2019-11-05 21:10 ` Sean Paul [this message]
2019-11-05 21:10 ` [PATCH v2 5/7] drm/mediatek: Support reflect-y plane rotation Sean Paul
2019-11-05 21:10 ` [PATCH v2 6/7] drm/mediatek: Support reflect-x " Sean Paul
2019-11-05 21:10 ` [PATCH v2 7/7] drm/mediatek: Support 180 degree rotation Sean Paul
2019-11-06 9:07 ` CK Hu
2019-11-06 14:42 ` Sean Paul
2019-11-07 1:38 ` CK Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191105211034.123937-5-sean@poorly.run \
--to=sean@poorly.run \
--cc=ck.hu@mediatek.com \
--cc=dcastagna@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=frkoenig@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=markyacoub@google.com \
--cc=matthias.bgg@gmail.com \
--cc=mcasas@chromium.org \
--cc=p.zabel@pengutronix.de \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).