public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>
Cc: vkoul@kernel.org, linux-crypto@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] crypto: atmel-sha - Retire dma_request_slave_channel_compat()
Date: Thu, 21 Nov 2019 12:16:01 +0200	[thread overview]
Message-ID: <20191121101602.21941-3-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191121101602.21941-1-peter.ujfalusi@ti.com>

The driver no longer boots in legacy mode, only via DT. This makes the
dma_request_slave_channel_compat() redundant.
If ever the filter function would be executed it will return false as the
dma_slave is not really initialized.

Switch to use dma_request_chan() which would allow legacy boot if ever
needed again by configuring dma_slave_map for the DMA driver.

At the same time skip allocating memory for dma_slave as it is not used
anymore.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/crypto/atmel-sha.c | 39 +++++++-------------------------------
 1 file changed, 7 insertions(+), 32 deletions(-)

diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c
index 8ea0e4bcde0d..9d392c5ff06b 100644
--- a/drivers/crypto/atmel-sha.c
+++ b/drivers/crypto/atmel-sha.c
@@ -2608,32 +2608,16 @@ static int atmel_sha_register_algs(struct atmel_sha_dev *dd)
 	return err;
 }
 
-static bool atmel_sha_filter(struct dma_chan *chan, void *slave)
-{
-	struct at_dma_slave	*sl = slave;
-
-	if (sl && sl->dma_dev == chan->device->dev) {
-		chan->private = sl;
-		return true;
-	} else {
-		return false;
-	}
-}
-
 static int atmel_sha_dma_init(struct atmel_sha_dev *dd,
 				struct crypto_platform_data *pdata)
 {
-	dma_cap_mask_t mask_in;
+	dd->dma_lch_in.chan = dma_request_chan(dd->dev, "tx");
+	if (IS_ERR(dd->dma_lch_in.chan)) {
+		int ret = PTR_ERR(dd->dma_lch_in.chan);
 
-	/* Try to grab DMA channel */
-	dma_cap_zero(mask_in);
-	dma_cap_set(DMA_SLAVE, mask_in);
-
-	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in,
-			atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
-	if (!dd->dma_lch_in.chan) {
-		dev_warn(dd->dev, "no DMA channel available\n");
-		return -ENODEV;
+		if (ret != -EPROBE_DEFER)
+			dev_warn(dd->dev, "no DMA channel available\n");
+		return ret;
 	}
 
 	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
@@ -2724,12 +2708,6 @@ static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pd
 	if (!pdata)
 		return ERR_PTR(-ENOMEM);
 
-	pdata->dma_slave = devm_kzalloc(&pdev->dev,
-					sizeof(*(pdata->dma_slave)),
-					GFP_KERNEL);
-	if (!pdata->dma_slave)
-		return ERR_PTR(-ENOMEM);
-
 	return pdata;
 }
 #else /* CONFIG_OF */
@@ -2823,10 +2801,7 @@ static int atmel_sha_probe(struct platform_device *pdev)
 				goto iclk_unprepare;
 			}
 		}
-		if (!pdata->dma_slave) {
-			err = -ENXIO;
-			goto iclk_unprepare;
-		}
+
 		err = atmel_sha_dma_init(sha_dd, pdata);
 		if (err)
 			goto err_sha_dma;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-11-21 10:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21 10:15 [PATCH v2 0/3] crypto: atmel - Retire dma_request_slave_channel_compat() Peter Ujfalusi
2019-11-21 10:16 ` [PATCH v2 1/3] crypto: atmel-aes " Peter Ujfalusi
2019-11-21 10:16 ` Peter Ujfalusi [this message]
2019-11-21 10:16 ` [PATCH v2 3/3] crypto: atmel-tdes " Peter Ujfalusi
2019-11-22  4:37 ` [PATCH v2 0/3] crypto: atmel " Vinod Koul
2019-12-11  9:36 ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191121101602.21941-3-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox