From: Guenter Roeck <linux@roeck-us.net>
To: Jiaxin Yu <jiaxin.yu@mediatek.com>
Cc: mark.rutland@arm.com, alsa-devel@alsa-project.org,
yong.liang@mediatek.com, lgirdwood@gmail.com, robh+dt@kernel.org,
perex@perex.cz, tzungbi@google.com, broonie@kernel.org,
linux-mediatek@lists.infradead.org, p.zabel@pengutronix.de,
eason.yen@mediatek.com, yingjoe.chen@mediatek.com,
wim@linux-watchdog.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells
Date: Sun, 24 Nov 2019 21:59:59 -0800 [thread overview]
Message-ID: <20191125055959.GB5636@roeck-us.net> (raw)
In-Reply-To: <1574651030-29519-2-git-send-email-jiaxin.yu@mediatek.com>
On Mon, Nov 25, 2019 at 11:03:49AM +0800, Jiaxin Yu wrote:
> From: "yong.liang" <yong.liang@mediatek.com>
>
> Add #reset-cells property and update example
>
> Signed-off-by: yong.liang <yong.liang@mediatek.com>
> Signed-off-by: jiaxin.yu <jiaxin.yu@mediatek.com>
> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
I keep wondering why your series does not show up in the watchdog patchwork.
Turns out that is not surprising, since you don't copy the watchdog mailing
list. That all but guarantees that it gets lost from my workflow. That is
kind of interesting - there are lots of lists in Cc:, but the two lists
that matter because maintainers need to review it (watchdog and devicetree)
are missing.
Anyway, comment and question below.
> ---
> .../devicetree/bindings/watchdog/mtk-wdt.txt | 10 ++++++---
> .../reset-controller/mt2712-resets.h | 22 +++++++++++++++++++
> .../reset-controller/mt8183-resets.h | 15 +++++++++++++
> 3 files changed, 44 insertions(+), 3 deletions(-)
> create mode 100644 include/dt-bindings/reset-controller/mt2712-resets.h
>
> diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> index 3ee625d0812f..4dd36bd3f1ad 100644
> --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> @@ -4,6 +4,7 @@ Required properties:
>
> - compatible should contain:
> "mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
> + "mediatek,mt2712-wdt", "mediatek,mt6589-wdt": for MT2712
Is that (still) correct ? After all, behavior is different for those two now.
Just wondering.
Guenter
> "mediatek,mt6589-wdt": for MT6589
> "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
> "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
> @@ -16,11 +17,14 @@ Required properties:
>
> Optional properties:
> - timeout-sec: contains the watchdog timeout in seconds.
> +- #reset-cells: Should be 1.
>
> Example:
>
> -wdt: watchdog@10000000 {
> - compatible = "mediatek,mt6589-wdt";
> - reg = <0x10000000 0x18>;
> +watchdog: watchdog@10007000 {
> + compatible = "mediatek,mt8183-wdt",
> + "mediatek,mt6589-wdt";
> + reg = <0 0x10007000 0 0x100>;
> timeout-sec = <10>;
> + #reset-cells = <1>;
> };
> diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset-controller/mt2712-resets.h
> new file mode 100644
> index 000000000000..e81c8bb311b7
> --- /dev/null
> +++ b/include/dt-bindings/reset-controller/mt2712-resets.h
> @@ -0,0 +1,22 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Yong Liang <yong.liang@mediatek.com>
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2712
> +#define _DT_BINDINGS_RESET_CONTROLLER_MT2712
> +
> +#define MT2712_TOPRGU_INFRA_SW_RST 0
> +#define MT2712_TOPRGU_MM_SW_RST 1
> +#define MT2712_TOPRGU_MFG_SW_RST 2
> +#define MT2712_TOPRGU_VENC_SW_RST 3
> +#define MT2712_TOPRGU_VDEC_SW_RST 4
> +#define MT2712_TOPRGU_IMG_SW_RST 5
> +#define MT2712_TOPRGU_INFRA_AO_SW_RST 8
> +#define MT2712_TOPRGU_USB_SW_RST 9
> +#define MT2712_TOPRGU_APMIXED_SW_RST 10
> +
> +#define MT2712_TOPRGU_SW_RST_NUM 10
> +
> +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT2712 */
> diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset-controller/mt8183-resets.h
> index 8804e34ebdd4..d582da6bedae 100644
> --- a/include/dt-bindings/reset-controller/mt8183-resets.h
> +++ b/include/dt-bindings/reset-controller/mt8183-resets.h
> @@ -78,4 +78,19 @@
> #define MT8183_INFRACFG_AO_I2C7_SW_RST 126
> #define MT8183_INFRACFG_AO_I2C8_SW_RST 127
>
> +#define MT8183_TOPRGU_MM_SW_RST 1
> +#define MT8183_TOPRGU_MFG_SW_RST 2
> +#define MT8183_TOPRGU_VENC_SW_RST 3
> +#define MT8183_TOPRGU_VDEC_SW_RST 4
> +#define MT8183_TOPRGU_IMG_SW_RST 5
> +#define MT8183_TOPRGU_MD_SW_RST 7
> +#define MT8183_TOPRGU_CONN_SW_RST 9
> +#define MT8183_TOPRGU_CONN_MCU_SW_RST 12
> +#define MT8183_TOPRGU_IPU0_SW_RST 14
> +#define MT8183_TOPRGU_IPU1_SW_RST 15
> +#define MT8183_TOPRGU_AUDIO_SW_RST 17
> +#define MT8183_TOPRGU_CAMSYS_SW_RST 18
> +
> +#define MT8183_TOPRGU_SW_RST_NUM 18
> +
> #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8183 */
> --
> 2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-25 6:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-25 3:03 [PATCH v5 0/2] ASoC: mt8183: fix audio playback slowly after playback Jiaxin Yu
2019-11-25 3:03 ` [PATCH v5 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells Jiaxin Yu
2019-11-25 5:59 ` Guenter Roeck [this message]
2019-11-25 10:07 ` Philipp Zabel
2019-11-29 6:33 ` Yong Liang
2019-11-29 6:36 ` Yong Liang
2019-11-29 6:37 ` Yong Liang
2019-11-29 6:39 ` Yong Liang
2019-11-25 3:03 ` [PATCH v5 2/2] watchdog: mtk_wdt: mt8183: Add reset controller Jiaxin Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191125055959.GB5636@roeck-us.net \
--to=linux@roeck-us.net \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=eason.yen@mediatek.com \
--cc=jiaxin.yu@mediatek.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tzungbi@google.com \
--cc=wim@linux-watchdog.org \
--cc=yingjoe.chen@mediatek.com \
--cc=yong.liang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox