From: Marco Felsch <m.felsch@pengutronix.de>
To: robh+dt@kernel.org, shawnguo@kernel.org, festevam@gmail.com,
linux-imx@nxp.com, c.hemp@phytec.de, s.christ@phytec.de,
chf.fritz@googlemail.com, s.riedmueller@phytec.de
Cc: kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
Date: Fri, 29 Nov 2019 17:48:57 +0100 [thread overview]
Message-ID: <20191129164859.15632-1-m.felsch@pengutronix.de> (raw)
The current set minimum voltage of 730000mV seems to be wrong. I don't
know the document which specifies that but the imx6qdl datasheets says
that the minimum voltage should be 1.05V for VDD_ARM (LDO enabled, lowest
opp) and 1.275V for VDD_SOC (LDO enabled, lowest opp).
Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 6486df3e2942..46d4953c5588 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -107,14 +107,14 @@
regulators {
vdd_arm: buck1 {
regulator-name = "vdd_arm";
- regulator-min-microvolt = <730000>;
+ regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
vdd_soc: buck2 {
regulator-name = "vdd_soc";
- regulator-min-microvolt = <730000>;
+ regulator-min-microvolt = <1275000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-11-29 16:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-29 16:48 Marco Felsch [this message]
2019-11-29 16:48 ` [PATCH 2/3] ARM: dts: imx6: phycore-som: fix emmc supply Marco Felsch
2019-12-05 12:00 ` Stefan Riedmüller
2019-12-10 9:09 ` Marco Felsch
2019-12-12 9:00 ` Stefan Riedmüller
2019-11-29 16:48 ` [PATCH 3/3] ARM: dts: imx6: phycore-som: add pmic onkey device Marco Felsch
2020-01-07 13:48 ` Marco Felsch
2020-01-09 6:46 ` Shawn Guo
2019-12-02 10:09 ` [PATCH 1/3] ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage Stefan Riedmüller
2019-12-02 12:42 ` Marco Felsch
2019-12-02 13:55 ` Stefan Riedmüller
2019-12-02 14:14 ` Marco Felsch
2019-12-02 14:30 ` Stefan Riedmüller
2019-12-02 14:53 ` Marco Felsch
2019-12-03 8:11 ` Stefan Riedmüller
2019-12-03 8:33 ` Marco Felsch
2019-12-03 9:07 ` Stefan Riedmüller
2019-12-03 11:44 ` Lucas Stach
2019-12-03 12:37 ` Stefan Riedmüller
2019-12-05 7:19 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191129164859.15632-1-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=c.hemp@phytec.de \
--cc=chf.fritz@googlemail.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.christ@phytec.de \
--cc=s.riedmueller@phytec.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox