* [PATCH] mfd: rk808: Always use poweroff when requested
@ 2019-12-09 11:57 Soeren Moch
2019-12-09 12:32 ` Heiko Stübner
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Soeren Moch @ 2019-12-09 11:57 UTC (permalink / raw)
To: Lee Jones
Cc: linux-rockchip, Soeren Moch, Heiko Stuebner, linux-arm-kernel,
linux-kernel
With the device tree property "rockchip,system-power-controller" we
explicitly request to use this PMIC to power off the system. So always
register our poweroff function, even if some other handler (probably
PSCI poweroff) was registered before.
Signed-off-by: Soeren Moch <smoch@web.de>
---
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/mfd/rk808.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index a69a6742ecdc..616e44e7ef98 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client,
const struct mfd_cell *cells;
int nr_pre_init_regs;
int nr_cells;
- int pm_off = 0, msb, lsb;
+ int msb, lsb;
unsigned char pmic_id_msb, pmic_id_lsb;
int ret;
int i;
@@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client,
goto err_irq;
}
- pm_off = of_property_read_bool(np,
- "rockchip,system-power-controller");
- if (pm_off && !pm_power_off) {
+ if (of_property_read_bool(np, "rockchip,system-power-controller")) {
rk808_i2c_client = client;
pm_power_off = rk808->pm_pwroff_fn;
- }
-
- if (pm_off && !pm_power_off_prepare) {
- if (!rk808_i2c_client)
- rk808_i2c_client = client;
pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-09 11:57 [PATCH] mfd: rk808: Always use poweroff when requested Soeren Moch @ 2019-12-09 12:32 ` Heiko Stübner 2019-12-09 13:43 ` Robin Murphy 2019-12-10 12:42 ` Anand Moon 2 siblings, 0 replies; 9+ messages in thread From: Heiko Stübner @ 2019-12-09 12:32 UTC (permalink / raw) To: Soeren Moch; +Cc: linux-rockchip, Lee Jones, linux-kernel, linux-arm-kernel Am Montag, 9. Dezember 2019, 12:57:46 CET schrieb Soeren Moch: > With the device tree property "rockchip,system-power-controller" we > explicitly request to use this PMIC to power off the system. So always > register our poweroff function, even if some other handler (probably > PSCI poweroff) was registered before. > > Signed-off-by: Soeren Moch <smoch@web.de> Sounds very sensible Reviewed-by: Heiko Stuebner <heiko@sntech.de> > --- > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Heiko Stuebner <heiko@sntech.de> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > drivers/mfd/rk808.c | 11 ++--------- > 1 file changed, 2 insertions(+), 9 deletions(-) > > diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c > index a69a6742ecdc..616e44e7ef98 100644 > --- a/drivers/mfd/rk808.c > +++ b/drivers/mfd/rk808.c > @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, > const struct mfd_cell *cells; > int nr_pre_init_regs; > int nr_cells; > - int pm_off = 0, msb, lsb; > + int msb, lsb; > unsigned char pmic_id_msb, pmic_id_lsb; > int ret; > int i; > @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, > goto err_irq; > } > > - pm_off = of_property_read_bool(np, > - "rockchip,system-power-controller"); > - if (pm_off && !pm_power_off) { > + if (of_property_read_bool(np, "rockchip,system-power-controller")) { > rk808_i2c_client = client; > pm_power_off = rk808->pm_pwroff_fn; > - } > - > - if (pm_off && !pm_power_off_prepare) { > - if (!rk808_i2c_client) > - rk808_i2c_client = client; > pm_power_off_prepare = rk808->pm_pwroff_prep_fn; > } > > -- > 2.17.1 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-09 11:57 [PATCH] mfd: rk808: Always use poweroff when requested Soeren Moch 2019-12-09 12:32 ` Heiko Stübner @ 2019-12-09 13:43 ` Robin Murphy 2019-12-10 12:42 ` Anand Moon 2 siblings, 0 replies; 9+ messages in thread From: Robin Murphy @ 2019-12-09 13:43 UTC (permalink / raw) To: Soeren Moch, Lee Jones Cc: linux-rockchip, Heiko Stuebner, linux-arm-kernel, linux-kernel On 09/12/2019 11:57 am, Soeren Moch wrote: > With the device tree property "rockchip,system-power-controller" we > explicitly request to use this PMIC to power off the system. So always > register our poweroff function, even if some other handler (probably > PSCI poweroff) was registered before. This seems preferable to abusing syscore ops, and at least it does allow the firmware behaviour to be encapsulated in the DT (and thus more easily updated if and when a firmware-based shutdown can be achieved on currently-crippled boards) rather than baking assumptions into the kernel. And in the meantime, I *would* quite like to be able to power down my RK3399 board without having to lean on the button... so I guess, Acked-by: Robin Murphy <robin.murphy@arm.com> > Signed-off-by: Soeren Moch <smoch@web.de> > --- > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Heiko Stuebner <heiko@sntech.de> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > drivers/mfd/rk808.c | 11 ++--------- > 1 file changed, 2 insertions(+), 9 deletions(-) > > diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c > index a69a6742ecdc..616e44e7ef98 100644 > --- a/drivers/mfd/rk808.c > +++ b/drivers/mfd/rk808.c > @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, > const struct mfd_cell *cells; > int nr_pre_init_regs; > int nr_cells; > - int pm_off = 0, msb, lsb; > + int msb, lsb; > unsigned char pmic_id_msb, pmic_id_lsb; > int ret; > int i; > @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, > goto err_irq; > } > > - pm_off = of_property_read_bool(np, > - "rockchip,system-power-controller"); > - if (pm_off && !pm_power_off) { > + if (of_property_read_bool(np, "rockchip,system-power-controller")) { > rk808_i2c_client = client; > pm_power_off = rk808->pm_pwroff_fn; > - } > - > - if (pm_off && !pm_power_off_prepare) { > - if (!rk808_i2c_client) > - rk808_i2c_client = client; > pm_power_off_prepare = rk808->pm_pwroff_prep_fn; > } > > -- > 2.17.1 > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-09 11:57 [PATCH] mfd: rk808: Always use poweroff when requested Soeren Moch 2019-12-09 12:32 ` Heiko Stübner 2019-12-09 13:43 ` Robin Murphy @ 2019-12-10 12:42 ` Anand Moon 2019-12-10 12:55 ` Markus Reichl 2 siblings, 1 reply; 9+ messages in thread From: Anand Moon @ 2019-12-10 12:42 UTC (permalink / raw) To: Soeren Moch Cc: linux-rockchip, Lee Jones, Heiko Stuebner, linux-arm-kernel, Linux Kernel Hi Soeren, On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote: > > With the device tree property "rockchip,system-power-controller" we > explicitly request to use this PMIC to power off the system. So always > register our poweroff function, even if some other handler (probably > PSCI poweroff) was registered before. > > Signed-off-by: Soeren Moch <smoch@web.de> > --- > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Heiko Stuebner <heiko@sntech.de> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > drivers/mfd/rk808.c | 11 ++--------- > 1 file changed, 2 insertions(+), 9 deletions(-) > > diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c > index a69a6742ecdc..616e44e7ef98 100644 > --- a/drivers/mfd/rk808.c > +++ b/drivers/mfd/rk808.c > @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, > const struct mfd_cell *cells; > int nr_pre_init_regs; > int nr_cells; > - int pm_off = 0, msb, lsb; > + int msb, lsb; > unsigned char pmic_id_msb, pmic_id_lsb; > int ret; > int i; > @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, > goto err_irq; > } > > - pm_off = of_property_read_bool(np, > - "rockchip,system-power-controller"); > - if (pm_off && !pm_power_off) { > + if (of_property_read_bool(np, "rockchip,system-power-controller")) { > rk808_i2c_client = client; > pm_power_off = rk808->pm_pwroff_fn; > - } > - > - if (pm_off && !pm_power_off_prepare) { > - if (!rk808_i2c_client) > - rk808_i2c_client = client; > pm_power_off_prepare = rk808->pm_pwroff_prep_fn; > } > I gave this a try on my Rock960 and Odroid N1 both got kernel panic below. [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered [ 58.306747] reboot: Power down [ 58.307106] ------------[ cut here ]------------ [ 58.307510] No atomic I2C transfer handler for 'i2c-0' [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 i2c_transfer+0xe4/0xf8 [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal ip_tables x_tables ipv6 nf_defrag_ipv6 [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted 5.5.0-rc1-dirty #1 [ 58.312725] Hardware name: 96boards Rock960 (DT) [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 58.313551] pc : i2c_transfer+0xe4/0xf8 [ 58.313889] lr : i2c_transfer+0xe4/0xf8 [ 58.314225] sp : ffff80001004bb00 [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000 [ 58.314981] x27: 0000000000000000 x26: 0000000000000000 [ 58.315446] x25: 0000000000000000 x24: 0000000000000008 [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74 [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58 [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010 [ 58.317305] x17: 0000000000000001 x16: 0000000000000019 [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8 [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0 [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8 [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9 [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000 [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8 [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000 [ 58.321491] Call trace: [ 58.321710] i2c_transfer+0xe4/0xf8 [ 58.322020] regmap_i2c_read+0x5c/0x98 [ 58.322350] _regmap_raw_read+0xcc/0x138 [ 58.322694] _regmap_bus_read+0x3c/0x70 [ 58.323034] _regmap_read+0x60/0xe0 [ 58.323341] _regmap_update_bits+0xc8/0x108 [ 58.323707] regmap_update_bits_base+0x60/0x90 [ 58.324099] rk808_device_shutdown+0x38/0x50 [ 58.324476] machine_power_off+0x24/0x30 [ 58.324823] kernel_power_off+0x64/0x70 [ 58.325159] __do_sys_reboot+0x15c/0x240 [ 58.325504] __arm64_sys_reboot+0x20/0x28 [ 58.325858] el0_svc_common.constprop.2+0x88/0x150 [ 58.326279] el0_svc_handler+0x20/0x80 [ 58.326607] el0_sync_handler+0x118/0x188 [ 58.326960] el0_sync+0x140/0x180 [ 58.327251] ---[ end trace b1de39d03d724d01 ]--- -Anand _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-10 12:42 ` Anand Moon @ 2019-12-10 12:55 ` Markus Reichl 2019-12-10 16:40 ` Soeren Moch 0 siblings, 1 reply; 9+ messages in thread From: Markus Reichl @ 2019-12-10 12:55 UTC (permalink / raw) To: Anand Moon, Soeren Moch Cc: linux-rockchip, Lee Jones, Heiko Stuebner, linux-arm-kernel, Linux Kernel Hi Anand, Am 10.12.19 um 13:42 schrieb Anand Moon: > Hi Soeren, > > On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote: >> >> With the device tree property "rockchip,system-power-controller" we >> explicitly request to use this PMIC to power off the system. So always >> register our poweroff function, even if some other handler (probably >> PSCI poweroff) was registered before. >> >> Signed-off-by: Soeren Moch <smoch@web.de> >> --- >> Cc: Lee Jones <lee.jones@linaro.org> >> Cc: Heiko Stuebner <heiko@sntech.de> >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: linux-rockchip@lists.infradead.org >> Cc: linux-kernel@vger.kernel.org >> --- >> drivers/mfd/rk808.c | 11 ++--------- >> 1 file changed, 2 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c >> index a69a6742ecdc..616e44e7ef98 100644 >> --- a/drivers/mfd/rk808.c >> +++ b/drivers/mfd/rk808.c >> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, >> const struct mfd_cell *cells; >> int nr_pre_init_regs; >> int nr_cells; >> - int pm_off = 0, msb, lsb; >> + int msb, lsb; >> unsigned char pmic_id_msb, pmic_id_lsb; >> int ret; >> int i; >> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, >> goto err_irq; >> } >> >> - pm_off = of_property_read_bool(np, >> - "rockchip,system-power-controller"); >> - if (pm_off && !pm_power_off) { >> + if (of_property_read_bool(np, "rockchip,system-power-controller")) { >> rk808_i2c_client = client; >> pm_power_off = rk808->pm_pwroff_fn; >> - } >> - >> - if (pm_off && !pm_power_off_prepare) { >> - if (!rk808_i2c_client) >> - rk808_i2c_client = client; >> pm_power_off_prepare = rk808->pm_pwroff_prep_fn; >> } >> > > I gave this a try on my Rock960 and Odroid N1 > both got kernel panic below. I see the same on rk3399-roc-pc. > > [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered > [ 58.306747] reboot: Power down > [ 58.307106] ------------[ cut here ]------------ > [ 58.307510] No atomic I2C transfer handler for 'i2c-0' > [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 > i2c_transfer+0xe4/0xf8 > [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio > rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi > panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm > btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s > snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie > ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal > ip_tables x_tables ipv6 nf_defrag_ipv6 > [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted 5.5.0-rc1-dirty #1 > [ 58.312725] Hardware name: 96boards Rock960 (DT) > [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO) > [ 58.313551] pc : i2c_transfer+0xe4/0xf8 > [ 58.313889] lr : i2c_transfer+0xe4/0xf8 > [ 58.314225] sp : ffff80001004bb00 > [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000 > [ 58.314981] x27: 0000000000000000 x26: 0000000000000000 > [ 58.315446] x25: 0000000000000000 x24: 0000000000000008 > [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74 > [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58 > [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010 > [ 58.317305] x17: 0000000000000001 x16: 0000000000000019 > [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8 > [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f > [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0 > [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8 > [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9 > [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000 > [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8 > [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000 > [ 58.321491] Call trace: > [ 58.321710] i2c_transfer+0xe4/0xf8 > [ 58.322020] regmap_i2c_read+0x5c/0x98 > [ 58.322350] _regmap_raw_read+0xcc/0x138 > [ 58.322694] _regmap_bus_read+0x3c/0x70 > [ 58.323034] _regmap_read+0x60/0xe0 > [ 58.323341] _regmap_update_bits+0xc8/0x108 > [ 58.323707] regmap_update_bits_base+0x60/0x90 > [ 58.324099] rk808_device_shutdown+0x38/0x50 > [ 58.324476] machine_power_off+0x24/0x30 > [ 58.324823] kernel_power_off+0x64/0x70 > [ 58.325159] __do_sys_reboot+0x15c/0x240 > [ 58.325504] __arm64_sys_reboot+0x20/0x28 > [ 58.325858] el0_svc_common.constprop.2+0x88/0x150 > [ 58.326279] el0_svc_handler+0x20/0x80 > [ 58.326607] el0_sync_handler+0x118/0x188 > [ 58.326960] el0_sync+0x140/0x180 > [ 58.327251] ---[ end trace b1de39d03d724d01 ]--- > > -Anand > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip > Gruß, -- Markus Reichl _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-10 12:55 ` Markus Reichl @ 2019-12-10 16:40 ` Soeren Moch 2019-12-11 2:00 ` Anand Moon 0 siblings, 1 reply; 9+ messages in thread From: Soeren Moch @ 2019-12-10 16:40 UTC (permalink / raw) To: Markus Reichl, Anand Moon Cc: linux-rockchip, Lee Jones, Heiko Stuebner, linux-arm-kernel, Linux Kernel On 10.12.19 13:55, Markus Reichl wrote: > Hi Anand, > > Am 10.12.19 um 13:42 schrieb Anand Moon: >> Hi Soeren, >> >> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote: >>> >>> With the device tree property "rockchip,system-power-controller" we >>> explicitly request to use this PMIC to power off the system. So always >>> register our poweroff function, even if some other handler (probably >>> PSCI poweroff) was registered before. >>> >>> Signed-off-by: Soeren Moch <smoch@web.de> >>> --- >>> Cc: Lee Jones <lee.jones@linaro.org> >>> Cc: Heiko Stuebner <heiko@sntech.de> >>> Cc: linux-arm-kernel@lists.infradead.org >>> Cc: linux-rockchip@lists.infradead.org >>> Cc: linux-kernel@vger.kernel.org >>> --- >>> drivers/mfd/rk808.c | 11 ++--------- >>> 1 file changed, 2 insertions(+), 9 deletions(-) >>> >>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c >>> index a69a6742ecdc..616e44e7ef98 100644 >>> --- a/drivers/mfd/rk808.c >>> +++ b/drivers/mfd/rk808.c >>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, >>> const struct mfd_cell *cells; >>> int nr_pre_init_regs; >>> int nr_cells; >>> - int pm_off = 0, msb, lsb; >>> + int msb, lsb; >>> unsigned char pmic_id_msb, pmic_id_lsb; >>> int ret; >>> int i; >>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, >>> goto err_irq; >>> } >>> >>> - pm_off = of_property_read_bool(np, >>> - "rockchip,system-power-controller"); >>> - if (pm_off && !pm_power_off) { >>> + if (of_property_read_bool(np, >>> "rockchip,system-power-controller")) { >>> rk808_i2c_client = client; >>> pm_power_off = rk808->pm_pwroff_fn; >>> - } >>> - >>> - if (pm_off && !pm_power_off_prepare) { >>> - if (!rk808_i2c_client) >>> - rk808_i2c_client = client; >>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn; >>> } >>> >> >> I gave this a try on my Rock960 and Odroid N1 >> both got kernel panic below. > > I see the same on rk3399-roc-pc. This is no panic, it's a harmless warning. The i2c core nowadays expects a specially marked i2c transfer function late in the powerdown cycle: diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 1a33007b03e9..cec115e0afa4 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -1126,6 +1126,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) static const struct i2c_algorithm rk3x_i2c_algorithm = { .master_xfer = rk3x_i2c_xfer, + .master_xfer_atomic = rk3x_i2c_xfer, /* usable for PMIC poweroff */ .functionality = rk3x_i2c_func, }; --- It is only used for powerdown. The regular i2c xfer function works. Heiko, should I send a formal patch for that? Soeren > >> >> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered >> [ 58.306747] reboot: Power down >> [ 58.307106] ------------[ cut here ]------------ >> [ 58.307510] No atomic I2C transfer handler for 'i2c-0' >> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 >> i2c_transfer+0xe4/0xf8 >> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio >> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi >> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm >> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s >> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie >> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal >> ip_tables x_tables ipv6 nf_defrag_ipv6 >> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted >> 5.5.0-rc1-dirty #1 >> [ 58.312725] Hardware name: 96boards Rock960 (DT) >> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO) >> [ 58.313551] pc : i2c_transfer+0xe4/0xf8 >> [ 58.313889] lr : i2c_transfer+0xe4/0xf8 >> [ 58.314225] sp : ffff80001004bb00 >> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000 >> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000 >> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008 >> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74 >> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58 >> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010 >> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019 >> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8 >> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f >> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0 >> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8 >> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9 >> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000 >> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8 >> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000 >> [ 58.321491] Call trace: >> [ 58.321710] i2c_transfer+0xe4/0xf8 >> [ 58.322020] regmap_i2c_read+0x5c/0x98 >> [ 58.322350] _regmap_raw_read+0xcc/0x138 >> [ 58.322694] _regmap_bus_read+0x3c/0x70 >> [ 58.323034] _regmap_read+0x60/0xe0 >> [ 58.323341] _regmap_update_bits+0xc8/0x108 >> [ 58.323707] regmap_update_bits_base+0x60/0x90 >> [ 58.324099] rk808_device_shutdown+0x38/0x50 >> [ 58.324476] machine_power_off+0x24/0x30 >> [ 58.324823] kernel_power_off+0x64/0x70 >> [ 58.325159] __do_sys_reboot+0x15c/0x240 >> [ 58.325504] __arm64_sys_reboot+0x20/0x28 >> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150 >> [ 58.326279] el0_svc_handler+0x20/0x80 >> [ 58.326607] el0_sync_handler+0x118/0x188 >> [ 58.326960] el0_sync+0x140/0x180 >> [ 58.327251] ---[ end trace b1de39d03d724d01 ]--- >> >> -Anand >> >> _______________________________________________ >> Linux-rockchip mailing list >> Linux-rockchip@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-rockchip >> > > Gruß, _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-10 16:40 ` Soeren Moch @ 2019-12-11 2:00 ` Anand Moon 2019-12-11 10:55 ` Soeren Moch 0 siblings, 1 reply; 9+ messages in thread From: Anand Moon @ 2019-12-11 2:00 UTC (permalink / raw) To: Soeren Moch Cc: Heiko Stuebner, Linux Kernel, Markus Reichl, linux-rockchip, Lee Jones, linux-arm-kernel hi Soeren, On Tue, 10 Dec 2019 at 22:10, Soeren Moch <smoch@web.de> wrote: > > > > On 10.12.19 13:55, Markus Reichl wrote: > > Hi Anand, > > > > Am 10.12.19 um 13:42 schrieb Anand Moon: > >> Hi Soeren, > >> > >> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote: > >>> > >>> With the device tree property "rockchip,system-power-controller" we > >>> explicitly request to use this PMIC to power off the system. So always > >>> register our poweroff function, even if some other handler (probably > >>> PSCI poweroff) was registered before. > >>> > >>> Signed-off-by: Soeren Moch <smoch@web.de> > >>> --- > >>> Cc: Lee Jones <lee.jones@linaro.org> > >>> Cc: Heiko Stuebner <heiko@sntech.de> > >>> Cc: linux-arm-kernel@lists.infradead.org > >>> Cc: linux-rockchip@lists.infradead.org > >>> Cc: linux-kernel@vger.kernel.org > >>> --- > >>> drivers/mfd/rk808.c | 11 ++--------- > >>> 1 file changed, 2 insertions(+), 9 deletions(-) > >>> > >>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c > >>> index a69a6742ecdc..616e44e7ef98 100644 > >>> --- a/drivers/mfd/rk808.c > >>> +++ b/drivers/mfd/rk808.c > >>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, > >>> const struct mfd_cell *cells; > >>> int nr_pre_init_regs; > >>> int nr_cells; > >>> - int pm_off = 0, msb, lsb; > >>> + int msb, lsb; > >>> unsigned char pmic_id_msb, pmic_id_lsb; > >>> int ret; > >>> int i; > >>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, > >>> goto err_irq; > >>> } > >>> > >>> - pm_off = of_property_read_bool(np, > >>> - "rockchip,system-power-controller"); > >>> - if (pm_off && !pm_power_off) { > >>> + if (of_property_read_bool(np, > >>> "rockchip,system-power-controller")) { > >>> rk808_i2c_client = client; > >>> pm_power_off = rk808->pm_pwroff_fn; > >>> - } > >>> - > >>> - if (pm_off && !pm_power_off_prepare) { > >>> - if (!rk808_i2c_client) > >>> - rk808_i2c_client = client; > >>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn; > >>> } > >>> > >> > >> I gave this a try on my Rock960 and Odroid N1 > >> both got kernel panic below. > > > > I see the same on rk3399-roc-pc. > This is no panic, it's a harmless warning. Ok but my device do not come up cleanly after that, it get stuck in u-boot in next boot. > The i2c core nowadays expects a specially marked i2c transfer function > late in the powerdown cycle: You can look into similar commit. d785334a0d5deff30a487c74324b842d2179553d (mfd: s2mps11: Add manual shutdown method for Odroid XU3) > > diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c > index 1a33007b03e9..cec115e0afa4 100644 > --- a/drivers/i2c/busses/i2c-rk3x.c > +++ b/drivers/i2c/busses/i2c-rk3x.c > @@ -1126,6 +1126,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) > > static const struct i2c_algorithm rk3x_i2c_algorithm = { > .master_xfer = rk3x_i2c_xfer, > + .master_xfer_atomic = rk3x_i2c_xfer, /* usable for PMIC poweroff */ > .functionality = rk3x_i2c_func, > }; > > --- > It is only used for powerdown. The regular i2c xfer function works. > > Heiko, should I send a formal patch for that? > > Soeren > > > > >> > >> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered > >> [ 58.306747] reboot: Power down > >> [ 58.307106] ------------[ cut here ]------------ > >> [ 58.307510] No atomic I2C transfer handler for 'i2c-0' > >> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 > >> i2c_transfer+0xe4/0xf8 > >> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio > >> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi > >> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm > >> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s > >> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie > >> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal > >> ip_tables x_tables ipv6 nf_defrag_ipv6 > >> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted > >> 5.5.0-rc1-dirty #1 > >> [ 58.312725] Hardware name: 96boards Rock960 (DT) > >> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO) > >> [ 58.313551] pc : i2c_transfer+0xe4/0xf8 > >> [ 58.313889] lr : i2c_transfer+0xe4/0xf8 > >> [ 58.314225] sp : ffff80001004bb00 > >> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000 > >> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000 > >> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008 > >> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74 > >> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58 > >> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010 > >> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019 > >> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8 > >> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f > >> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0 > >> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8 > >> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9 > >> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000 > >> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8 > >> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000 > >> [ 58.321491] Call trace: > >> [ 58.321710] i2c_transfer+0xe4/0xf8 > >> [ 58.322020] regmap_i2c_read+0x5c/0x98 > >> [ 58.322350] _regmap_raw_read+0xcc/0x138 > >> [ 58.322694] _regmap_bus_read+0x3c/0x70 > >> [ 58.323034] _regmap_read+0x60/0xe0 > >> [ 58.323341] _regmap_update_bits+0xc8/0x108 > >> [ 58.323707] regmap_update_bits_base+0x60/0x90 > >> [ 58.324099] rk808_device_shutdown+0x38/0x50 > >> [ 58.324476] machine_power_off+0x24/0x30 > >> [ 58.324823] kernel_power_off+0x64/0x70 > >> [ 58.325159] __do_sys_reboot+0x15c/0x240 > >> [ 58.325504] __arm64_sys_reboot+0x20/0x28 > >> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150 > >> [ 58.326279] el0_svc_handler+0x20/0x80 > >> [ 58.326607] el0_sync_handler+0x118/0x188 > >> [ 58.326960] el0_sync+0x140/0x180 > >> [ 58.327251] ---[ end trace b1de39d03d724d01 ]--- > >> > >> -Anand > >> > >> _______________________________________________ > >> Linux-rockchip mailing list > >> Linux-rockchip@lists.infradead.org > >> http://lists.infradead.org/mailman/listinfo/linux-rockchip > >> > > > > Gruß, > -Anand _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-11 2:00 ` Anand Moon @ 2019-12-11 10:55 ` Soeren Moch 2019-12-12 0:28 ` Robin Murphy 0 siblings, 1 reply; 9+ messages in thread From: Soeren Moch @ 2019-12-11 10:55 UTC (permalink / raw) To: Anand Moon Cc: Heiko Stuebner, Linux Kernel, Markus Reichl, linux-rockchip, Lee Jones, linux-arm-kernel On 11.12.19 03:00, Anand Moon wrote: > hi Soeren, > > On Tue, 10 Dec 2019 at 22:10, Soeren Moch <smoch@web.de> wrote: >> >> >> On 10.12.19 13:55, Markus Reichl wrote: >>> Hi Anand, >>> >>> Am 10.12.19 um 13:42 schrieb Anand Moon: >>>> Hi Soeren, >>>> >>>> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote: >>>>> With the device tree property "rockchip,system-power-controller" we >>>>> explicitly request to use this PMIC to power off the system. So always >>>>> register our poweroff function, even if some other handler (probably >>>>> PSCI poweroff) was registered before. >>>>> >>>>> Signed-off-by: Soeren Moch <smoch@web.de> >>>>> --- >>>>> Cc: Lee Jones <lee.jones@linaro.org> >>>>> Cc: Heiko Stuebner <heiko@sntech.de> >>>>> Cc: linux-arm-kernel@lists.infradead.org >>>>> Cc: linux-rockchip@lists.infradead.org >>>>> Cc: linux-kernel@vger.kernel.org >>>>> --- >>>>> drivers/mfd/rk808.c | 11 ++--------- >>>>> 1 file changed, 2 insertions(+), 9 deletions(-) >>>>> >>>>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c >>>>> index a69a6742ecdc..616e44e7ef98 100644 >>>>> --- a/drivers/mfd/rk808.c >>>>> +++ b/drivers/mfd/rk808.c >>>>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, >>>>> const struct mfd_cell *cells; >>>>> int nr_pre_init_regs; >>>>> int nr_cells; >>>>> - int pm_off = 0, msb, lsb; >>>>> + int msb, lsb; >>>>> unsigned char pmic_id_msb, pmic_id_lsb; >>>>> int ret; >>>>> int i; >>>>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, >>>>> goto err_irq; >>>>> } >>>>> >>>>> - pm_off = of_property_read_bool(np, >>>>> - "rockchip,system-power-controller"); >>>>> - if (pm_off && !pm_power_off) { >>>>> + if (of_property_read_bool(np, >>>>> "rockchip,system-power-controller")) { >>>>> rk808_i2c_client = client; >>>>> pm_power_off = rk808->pm_pwroff_fn; >>>>> - } >>>>> - >>>>> - if (pm_off && !pm_power_off_prepare) { >>>>> - if (!rk808_i2c_client) >>>>> - rk808_i2c_client = client; >>>>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn; >>>>> } >>>>> >>>> I gave this a try on my Rock960 and Odroid N1 >>>> both got kernel panic below. >>> I see the same on rk3399-roc-pc. >> This is no panic, it's a harmless warning. > Ok but my device do not come up cleanly after that, it get stuck in > u-boot in next boot. I do not know Rock960 and Odroid N1, so unfortunately I cannot debug your u-boot problem on these boards. From what you wrote the poweroff apparently works with this patch, I have no idea what could be a problem. After a complete power-off I would expect a clean cold boot. And that 's what I see on my RockPro64 board. This patch is about doing a PMIC poweroff when this method is requested in the devicetree. If this method does not work for your boards, you probably should remove the "rockchip,system-power-controller" property and use PSCI poweroff or whatever is desired on your boards. This patch does not change _how_ PMIC poweroff is done, only _that_ this method is used when explicitly requested. > >> The i2c core nowadays expects a specially marked i2c transfer function >> late in the powerdown cycle: > You can look into similar commit. > d785334a0d5deff30a487c74324b842d2179553d (mfd: s2mps11: Add manual > shutdown method for Odroid XU3) I cannot see what should be similar in this patch. This patch is about a totally different PMIC and how this needs to be programmed to work properly on another different board. Soeren > >> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c >> index 1a33007b03e9..cec115e0afa4 100644 >> --- a/drivers/i2c/busses/i2c-rk3x.c >> +++ b/drivers/i2c/busses/i2c-rk3x.c >> @@ -1126,6 +1126,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) >> >> static const struct i2c_algorithm rk3x_i2c_algorithm = { >> .master_xfer = rk3x_i2c_xfer, >> + .master_xfer_atomic = rk3x_i2c_xfer, /* usable for PMIC poweroff */ >> .functionality = rk3x_i2c_func, >> }; >> >> --- >> It is only used for powerdown. The regular i2c xfer function works. >> >> Heiko, should I send a formal patch for that? >> >> Soeren >> >>>> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered >>>> [ 58.306747] reboot: Power down >>>> [ 58.307106] ------------[ cut here ]------------ >>>> [ 58.307510] No atomic I2C transfer handler for 'i2c-0' >>>> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 >>>> i2c_transfer+0xe4/0xf8 >>>> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio >>>> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi >>>> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm >>>> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s >>>> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie >>>> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal >>>> ip_tables x_tables ipv6 nf_defrag_ipv6 >>>> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted >>>> 5.5.0-rc1-dirty #1 >>>> [ 58.312725] Hardware name: 96boards Rock960 (DT) >>>> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO) >>>> [ 58.313551] pc : i2c_transfer+0xe4/0xf8 >>>> [ 58.313889] lr : i2c_transfer+0xe4/0xf8 >>>> [ 58.314225] sp : ffff80001004bb00 >>>> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000 >>>> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000 >>>> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008 >>>> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74 >>>> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58 >>>> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010 >>>> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019 >>>> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8 >>>> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f >>>> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0 >>>> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8 >>>> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9 >>>> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000 >>>> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8 >>>> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000 >>>> [ 58.321491] Call trace: >>>> [ 58.321710] i2c_transfer+0xe4/0xf8 >>>> [ 58.322020] regmap_i2c_read+0x5c/0x98 >>>> [ 58.322350] _regmap_raw_read+0xcc/0x138 >>>> [ 58.322694] _regmap_bus_read+0x3c/0x70 >>>> [ 58.323034] _regmap_read+0x60/0xe0 >>>> [ 58.323341] _regmap_update_bits+0xc8/0x108 >>>> [ 58.323707] regmap_update_bits_base+0x60/0x90 >>>> [ 58.324099] rk808_device_shutdown+0x38/0x50 >>>> [ 58.324476] machine_power_off+0x24/0x30 >>>> [ 58.324823] kernel_power_off+0x64/0x70 >>>> [ 58.325159] __do_sys_reboot+0x15c/0x240 >>>> [ 58.325504] __arm64_sys_reboot+0x20/0x28 >>>> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150 >>>> [ 58.326279] el0_svc_handler+0x20/0x80 >>>> [ 58.326607] el0_sync_handler+0x118/0x188 >>>> [ 58.326960] el0_sync+0x140/0x180 >>>> [ 58.327251] ---[ end trace b1de39d03d724d01 ]--- >>>> >>>> -Anand >>>> >>>> _______________________________________________ >>>> Linux-rockchip mailing list >>>> Linux-rockchip@lists.infradead.org >>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip >>>> >>> Gruß, > -Anand _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mfd: rk808: Always use poweroff when requested 2019-12-11 10:55 ` Soeren Moch @ 2019-12-12 0:28 ` Robin Murphy 0 siblings, 0 replies; 9+ messages in thread From: Robin Murphy @ 2019-12-12 0:28 UTC (permalink / raw) To: Soeren Moch, Anand Moon Cc: Heiko Stuebner, Linux Kernel, Markus Reichl, linux-rockchip, Lee Jones, linux-arm-kernel On 2019-12-11 10:55 am, Soeren Moch wrote: > > > On 11.12.19 03:00, Anand Moon wrote: >> hi Soeren, >> >> On Tue, 10 Dec 2019 at 22:10, Soeren Moch <smoch@web.de> wrote: >>> >>> >>> On 10.12.19 13:55, Markus Reichl wrote: >>>> Hi Anand, >>>> >>>> Am 10.12.19 um 13:42 schrieb Anand Moon: >>>>> Hi Soeren, >>>>> >>>>> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote: >>>>>> With the device tree property "rockchip,system-power-controller" we >>>>>> explicitly request to use this PMIC to power off the system. So always >>>>>> register our poweroff function, even if some other handler (probably >>>>>> PSCI poweroff) was registered before. >>>>>> >>>>>> Signed-off-by: Soeren Moch <smoch@web.de> >>>>>> --- >>>>>> Cc: Lee Jones <lee.jones@linaro.org> >>>>>> Cc: Heiko Stuebner <heiko@sntech.de> >>>>>> Cc: linux-arm-kernel@lists.infradead.org >>>>>> Cc: linux-rockchip@lists.infradead.org >>>>>> Cc: linux-kernel@vger.kernel.org >>>>>> --- >>>>>> drivers/mfd/rk808.c | 11 ++--------- >>>>>> 1 file changed, 2 insertions(+), 9 deletions(-) >>>>>> >>>>>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c >>>>>> index a69a6742ecdc..616e44e7ef98 100644 >>>>>> --- a/drivers/mfd/rk808.c >>>>>> +++ b/drivers/mfd/rk808.c >>>>>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client, >>>>>> const struct mfd_cell *cells; >>>>>> int nr_pre_init_regs; >>>>>> int nr_cells; >>>>>> - int pm_off = 0, msb, lsb; >>>>>> + int msb, lsb; >>>>>> unsigned char pmic_id_msb, pmic_id_lsb; >>>>>> int ret; >>>>>> int i; >>>>>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client, >>>>>> goto err_irq; >>>>>> } >>>>>> >>>>>> - pm_off = of_property_read_bool(np, >>>>>> - "rockchip,system-power-controller"); >>>>>> - if (pm_off && !pm_power_off) { >>>>>> + if (of_property_read_bool(np, >>>>>> "rockchip,system-power-controller")) { >>>>>> rk808_i2c_client = client; >>>>>> pm_power_off = rk808->pm_pwroff_fn; >>>>>> - } >>>>>> - >>>>>> - if (pm_off && !pm_power_off_prepare) { >>>>>> - if (!rk808_i2c_client) >>>>>> - rk808_i2c_client = client; >>>>>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn; >>>>>> } >>>>>> >>>>> I gave this a try on my Rock960 and Odroid N1 >>>>> both got kernel panic below. >>>> I see the same on rk3399-roc-pc. >>> This is no panic, it's a harmless warning. >> Ok but my device do not come up cleanly after that, it get stuck in >> u-boot in next boot. > I do not know Rock960 and Odroid N1, so unfortunately I cannot debug > your u-boot problem on these boards. From what you wrote the poweroff > apparently works with this patch, I have no idea what could be a > problem. After a complete power-off I would expect a clean cold boot. > And that 's what I see on my RockPro64 board. FWIW I've now had a chance to give this a spin on my NanoPC-T4, and indeed I power-cycled the board about a dozen times in a row without any problems. So I'm not sure what's up with Anand's boards either :/ Robin. > This patch is about doing a PMIC poweroff when this method is requested > in the devicetree. If this method does not work for your boards, you > probably should remove the "rockchip,system-power-controller" property > and use PSCI poweroff or whatever is desired on your boards. This patch > does not change _how_ PMIC poweroff is done, only _that_ this method is > used when explicitly requested. >> >>> The i2c core nowadays expects a specially marked i2c transfer function >>> late in the powerdown cycle: >> You can look into similar commit. >> d785334a0d5deff30a487c74324b842d2179553d (mfd: s2mps11: Add manual >> shutdown method for Odroid XU3) > I cannot see what should be similar in this patch. This patch is about a > totally different PMIC and how this needs to be programmed to work > properly on another different board. > > Soeren >> >>> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c >>> index 1a33007b03e9..cec115e0afa4 100644 >>> --- a/drivers/i2c/busses/i2c-rk3x.c >>> +++ b/drivers/i2c/busses/i2c-rk3x.c >>> @@ -1126,6 +1126,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) >>> >>> static const struct i2c_algorithm rk3x_i2c_algorithm = { >>> .master_xfer = rk3x_i2c_xfer, >>> + .master_xfer_atomic = rk3x_i2c_xfer, /* usable for PMIC poweroff */ >>> .functionality = rk3x_i2c_func, >>> }; >>> >>> --- >>> It is only used for powerdown. The regular i2c xfer function works. >>> >>> Heiko, should I send a formal patch for that? >>> >>> Soeren >>> >>>>> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered >>>>> [ 58.306747] reboot: Power down >>>>> [ 58.307106] ------------[ cut here ]------------ >>>>> [ 58.307510] No atomic I2C transfer handler for 'i2c-0' >>>>> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 >>>>> i2c_transfer+0xe4/0xf8 >>>>> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio >>>>> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi >>>>> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm >>>>> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s >>>>> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie >>>>> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal >>>>> ip_tables x_tables ipv6 nf_defrag_ipv6 >>>>> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted >>>>> 5.5.0-rc1-dirty #1 >>>>> [ 58.312725] Hardware name: 96boards Rock960 (DT) >>>>> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO) >>>>> [ 58.313551] pc : i2c_transfer+0xe4/0xf8 >>>>> [ 58.313889] lr : i2c_transfer+0xe4/0xf8 >>>>> [ 58.314225] sp : ffff80001004bb00 >>>>> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000 >>>>> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000 >>>>> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008 >>>>> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74 >>>>> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58 >>>>> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010 >>>>> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019 >>>>> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8 >>>>> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f >>>>> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0 >>>>> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8 >>>>> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9 >>>>> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000 >>>>> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8 >>>>> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000 >>>>> [ 58.321491] Call trace: >>>>> [ 58.321710] i2c_transfer+0xe4/0xf8 >>>>> [ 58.322020] regmap_i2c_read+0x5c/0x98 >>>>> [ 58.322350] _regmap_raw_read+0xcc/0x138 >>>>> [ 58.322694] _regmap_bus_read+0x3c/0x70 >>>>> [ 58.323034] _regmap_read+0x60/0xe0 >>>>> [ 58.323341] _regmap_update_bits+0xc8/0x108 >>>>> [ 58.323707] regmap_update_bits_base+0x60/0x90 >>>>> [ 58.324099] rk808_device_shutdown+0x38/0x50 >>>>> [ 58.324476] machine_power_off+0x24/0x30 >>>>> [ 58.324823] kernel_power_off+0x64/0x70 >>>>> [ 58.325159] __do_sys_reboot+0x15c/0x240 >>>>> [ 58.325504] __arm64_sys_reboot+0x20/0x28 >>>>> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150 >>>>> [ 58.326279] el0_svc_handler+0x20/0x80 >>>>> [ 58.326607] el0_sync_handler+0x118/0x188 >>>>> [ 58.326960] el0_sync+0x140/0x180 >>>>> [ 58.327251] ---[ end trace b1de39d03d724d01 ]--- >>>>> >>>>> -Anand >>>>> >>>>> _______________________________________________ >>>>> Linux-rockchip mailing list >>>>> Linux-rockchip@lists.infradead.org >>>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip >>>>> >>>> Gruß, >> -Anand > > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-12-12 0:28 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-12-09 11:57 [PATCH] mfd: rk808: Always use poweroff when requested Soeren Moch 2019-12-09 12:32 ` Heiko Stübner 2019-12-09 13:43 ` Robin Murphy 2019-12-10 12:42 ` Anand Moon 2019-12-10 12:55 ` Markus Reichl 2019-12-10 16:40 ` Soeren Moch 2019-12-11 2:00 ` Anand Moon 2019-12-11 10:55 ` Soeren Moch 2019-12-12 0:28 ` Robin Murphy
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).