From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
linux-arm-kernel@lists.infradead.org,
Yunfeng Ye <yeyunfeng@huawei.com>,
Sudeep Holla <sudeep.holla@arm.com>
Subject: [PATCH AUTOSEL 5.4 159/350] arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()
Date: Tue, 10 Dec 2019 16:04:24 -0500 [thread overview]
Message-ID: <20191210210735.9077-120-sashal@kernel.org> (raw)
In-Reply-To: <20191210210735.9077-1-sashal@kernel.org>
From: Yunfeng Ye <yeyunfeng@huawei.com>
[ Upstream commit bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ]
In cases like suspend-to-disk and suspend-to-ram, a large number of CPU
cores need to be shut down. At present, the CPU hotplug operation is
serialised, and the CPU cores can only be shut down one by one. In this
process, if PSCI affinity_info() does not return LEVEL_OFF quickly,
cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores
need to be shut down, it will take a long time.
Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So
change the wait interval from 10 ms to max 1 ms and use usleep_range()
instead of msleep() for more accurate timer.
In addition, reducing the time interval will increase the messages
output, so remove the "Retry ..." message, instead, track time and
output to the the sucessful message.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/kernel/psci.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index c9f72b2665f1c..43ae4e0c968f6 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -81,7 +81,8 @@ static void cpu_psci_cpu_die(unsigned int cpu)
static int cpu_psci_cpu_kill(unsigned int cpu)
{
- int err, i;
+ int err;
+ unsigned long start, end;
if (!psci_ops.affinity_info)
return 0;
@@ -91,16 +92,18 @@ static int cpu_psci_cpu_kill(unsigned int cpu)
* while it is dying. So, try again a few times.
*/
- for (i = 0; i < 10; i++) {
+ start = jiffies;
+ end = start + msecs_to_jiffies(100);
+ do {
err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
- pr_info("CPU%d killed.\n", cpu);
+ pr_info("CPU%d killed (polled %d ms)\n", cpu,
+ jiffies_to_msecs(jiffies - start));
return 0;
}
- msleep(10);
- pr_info("Retrying again to check for CPU kill\n");
- }
+ usleep_range(100, 1000);
+ } while (time_before(jiffies, end));
pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
cpu, err);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-10 21:11 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191210210735.9077-1-sashal@kernel.org>
2019-12-10 21:02 ` [PATCH AUTOSEL 5.4 052/350] drm/sun4i: dsi: Fix TCON DRQ set bits Sasha Levin
2019-12-10 21:02 ` [PATCH AUTOSEL 5.4 068/350] media: meson/ao-cec: move cec_notifier_cec_adap_register after hw setup Sasha Levin
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode Sasha Levin
2019-12-11 10:47 ` Mark Brown
2019-12-19 17:35 ` Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 144/350] media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 145/350] media: aspeed: set hsync and vsync polarities to normal before starting mode detection Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 151/350] media: imx7-mipi-csis: Add a check for devm_regulator_get Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 152/350] media: aspeed: clear garbage interrupts Sasha Levin
2019-12-10 21:04 ` Sasha Levin [this message]
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 197/350] ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency Sasha Levin
2019-12-11 11:00 ` Mark Brown
2019-12-19 19:46 ` Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 201/350] cpufreq: sun50i: Fix CPU speed bin detection Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 205/350] media: staging/imx: Use a shorter name for driver Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 206/350] nvmem: imx-ocotp: reset error status on probe Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 219/350] perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 228/350] perf tools: Fix cross compile for ARM64 Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 247/350] media: exynos4-is: fix wrong mdev and v4l2 dev order in error path Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 254/350] crypto: atmel - Fix authenc support when it is set to m Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 258/350] media: cedrus: Use helpers to access capture queue Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 264/350] spi: pxa2xx: Add missed security checks Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 288/350] MIPS: ralink: enable PCI support only if driver for mt7621 SoC is selected Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 316/350] int128: move __uint128_t compiler test to Kconfig Sasha Levin
2019-12-11 10:07 ` Ard Biesheuvel
2019-12-19 23:24 ` Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 324/350] mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 329/350] crypto: sun4i-ss - Fix 64-bit size_t warnings Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 331/350] crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210210735.9077-120-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sudeep.holla@arm.com \
--cc=yeyunfeng@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).