From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
Merlijn Wajer <merlijn@wizzup.org>,
dri-devel@lists.freedesktop.org,
Maxime Ripard <mripard@kernel.org>,
Jagan Teki <jagan@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 052/350] drm/sun4i: dsi: Fix TCON DRQ set bits
Date: Tue, 10 Dec 2019 16:02:37 -0500 [thread overview]
Message-ID: <20191210210735.9077-13-sashal@kernel.org> (raw)
In-Reply-To: <20191210210735.9077-1-sashal@kernel.org>
From: Jagan Teki <jagan@amarulasolutions.com>
[ Upstream commit 7ac6269968826f9cad61b501bb613cc5cadb7229 ]
The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.
Active Front Sync Back
Region Porch Porch
<-----------------------><----------------><--------------><-------------->
//////////////////////|
////////////////////// |
////////////////////// |.................. ................
________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>
<----- lcd_[xy] --------> <- lcd_[hv]spw ->
<---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>
The DSI driver misinterpreted the hbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the horizontal front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.
Including additional sync timings leads to flip_done timed out as:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace b57eb1e5c64c6b8b ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 1636344ba9ec2..f83522717488a 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -437,9 +437,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
SUN6I_DSI_BURST_LINE_SYNC_POINT(SUN6I_DSI_SYNC_POINT));
val = SUN6I_DSI_TCON_DRQ_ENABLE_MODE;
- } else if ((mode->hsync_end - mode->hdisplay) > 20) {
+ } else if ((mode->hsync_start - mode->hdisplay) > 20) {
/* Maaaaaagic */
- u16 drq = (mode->hsync_end - mode->hdisplay) - 20;
+ u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
drq *= mipi_dsi_pixel_format_to_bpp(device->format);
drq /= 32;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next parent reply other threads:[~2019-12-10 21:08 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191210210735.9077-1-sashal@kernel.org>
2019-12-10 21:02 ` Sasha Levin [this message]
2019-12-10 21:02 ` [PATCH AUTOSEL 5.4 068/350] media: meson/ao-cec: move cec_notifier_cec_adap_register after hw setup Sasha Levin
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode Sasha Levin
2019-12-11 10:47 ` Mark Brown
2019-12-19 17:35 ` Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 144/350] media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 145/350] media: aspeed: set hsync and vsync polarities to normal before starting mode detection Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 151/350] media: imx7-mipi-csis: Add a check for devm_regulator_get Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 152/350] media: aspeed: clear garbage interrupts Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 159/350] arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill() Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 197/350] ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency Sasha Levin
2019-12-11 11:00 ` Mark Brown
2019-12-19 19:46 ` Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 201/350] cpufreq: sun50i: Fix CPU speed bin detection Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 205/350] media: staging/imx: Use a shorter name for driver Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 206/350] nvmem: imx-ocotp: reset error status on probe Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 219/350] perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 228/350] perf tools: Fix cross compile for ARM64 Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 247/350] media: exynos4-is: fix wrong mdev and v4l2 dev order in error path Sasha Levin
2019-12-10 21:05 ` [PATCH AUTOSEL 5.4 254/350] crypto: atmel - Fix authenc support when it is set to m Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 258/350] media: cedrus: Use helpers to access capture queue Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 264/350] spi: pxa2xx: Add missed security checks Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 288/350] MIPS: ralink: enable PCI support only if driver for mt7621 SoC is selected Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 316/350] int128: move __uint128_t compiler test to Kconfig Sasha Levin
2019-12-11 10:07 ` Ard Biesheuvel
2019-12-19 23:24 ` Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 324/350] mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 329/350] crypto: sun4i-ss - Fix 64-bit size_t warnings Sasha Levin
2019-12-10 21:07 ` [PATCH AUTOSEL 5.4 331/350] crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210210735.9077-13-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=mripard@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).