From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: devicetree@vger.kernel.org, robh+dt@kernel.org,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx7: Unify temp-grade and speed-grade nodes
Date: Thu, 12 Dec 2019 10:38:00 -0300 [thread overview]
Message-ID: <20191212133800.17929-1-festevam@gmail.com> (raw)
The following warning is seen when building with W=1:
arch/arm/boot/dts/imx7s.dtsi:551.39-553.7: Warning (unique_unit_address): /soc/aips-bus@30000000/ocotp-ctrl@30350000/temp-grade@10: duplicate unit-address (also used in node /soc/aips-bus@30000000/ocotp-ctrl@30350000/speed-grade@10)
Since temp-grade and speed-grade point to the same node, replace them by
a single one to avoid the duplicate unit-address warning.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/boot/dts/imx7d.dtsi | 2 +-
arch/arm/boot/dts/imx7s.dtsi | 9 ++-------
2 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index d8acd7cc7918..92f6d0c2a74f 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -12,7 +12,7 @@
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
- nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cells = <&fuse_grade>;
nvmem-cell-names = "speed_grade";
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1b812f4e7453..05d099da5a02 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -152,8 +152,7 @@
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>,
- <&tempmon_temp_grade>;
+ nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
};
@@ -548,11 +547,7 @@
reg = <0x3c 0x4>;
};
- tempmon_temp_grade: temp-grade@10 {
- reg = <0x10 0x4>;
- };
-
- cpu_speed_grade: speed-grade@10 {
+ fuse_grade: temp-grade@10 {
reg = <0x10 0x4>;
};
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-12-12 13:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-12 13:38 Fabio Estevam [this message]
2019-12-23 6:27 ` [PATCH] ARM: dts: imx7: Unify temp-grade and speed-grade nodes Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191212133800.17929-1-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).