From: Kamel Bouhara <kamel.bouhara@bootlin.com>
To: Codrin.Ciubotariu@microchip.com,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/3] SAMA5D2 i2c bus recovery testing
Date: Mon, 16 Dec 2019 11:26:59 +0100 [thread overview]
Message-ID: <20191216102659.GA23978@kb-xps> (raw)
In-Reply-To: <20191216101044.x7m7edrrjn2xtq6h@M43218.corp.atmel.com>
On Mon, Dec 16, 2019 at 11:10:44AM +0100, Ludovic Desroches wrote:
> Hi Kamel,
>
Hi Ludovic,
> On Thu, Dec 05, 2019 at 03:03:02PM +0100, Kamel Bouhara wrote:
> >
> > Here are the sama5d2 patches, as there is not pinmux defined in the
> > dtsi. I choosed to only apply it to derivated board as the i2c
> > configuration is specific for each.
> >
> > Of course, it could be great if could test it on the ptc board as well.
> >
>
> The i2c mailing list is missing, can you resend it please.
>
Actually it was not intended to be sent to any mailing list, it is a
mail for Codrin so he can achieve some tests.
> By the way, it fails to apply against next and 5.5-rc1. On which version is it
> based? I assume a cherry-pick should work but git am fails.
>
It's based on 5.4, Im not sure it will apply on next but it should on
5.5, anyway it is a WIP here.
Best Regards,
Kamel
> Regards
>
> Ludovic
>
> > Best Regards,
> > Kamel
> >
> > Kamel Bouhara (3):
> > dt-bindings: i2c: at91: document optional bus recovery properties
> > i2c: at91: implement i2c bus recovery
> > ARM: at91/dt: sama5d2: add i2c gpio pinctrl
> >
> > .../devicetree/bindings/i2c/i2c-at91.txt | 10 +++
> > arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 33 +++++++++-
> > arch/arm/boot/dts/at91-sama5d2_xplained.dts | 33 +++++++++-
> > drivers/i2c/busses/i2c-at91-master.c | 64 +++++++++++++++++++
> > drivers/i2c/busses/i2c-at91.h | 8 +++
> > 5 files changed, 142 insertions(+), 6 deletions(-)
> >
> > --
> > 2.24.0
> >
--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2019-12-16 10:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-05 14:03 [PATCH 0/3] SAMA5D2 i2c bus recovery testing Kamel Bouhara
2019-12-05 14:03 ` [PATCH 1/3] dt-bindings: i2c: at91: document optional bus recovery properties Kamel Bouhara
2019-12-05 14:03 ` [PATCH 2/3] i2c: at91: implement i2c bus recovery Kamel Bouhara
2019-12-05 14:03 ` [PATCH 3/3] ARM: at91/dt: sama5d2: add i2c gpio pinctrl Kamel Bouhara
2019-12-16 10:10 ` [PATCH 0/3] SAMA5D2 i2c bus recovery testing Ludovic Desroches
2019-12-16 10:26 ` Kamel Bouhara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191216102659.GA23978@kb-xps \
--to=kamel.bouhara@bootlin.com \
--cc=Codrin.Ciubotariu@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox