From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: rockchip: rk3368-lion-haikou: remove identical &uart0 node
Date: Fri, 20 Dec 2019 13:55:20 +0100 [thread overview]
Message-ID: <20191220125520.29871-1-jbx6244@gmail.com> (raw)
Remove identical &uart0 node.
Sort nodes in alphabetical order.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 76 ++++++++++------------
1 file changed, 35 insertions(+), 41 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index 8251f3c0d..93601fe05 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -64,47 +64,6 @@
};
};
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <25000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- rockchip,default-sample-phase = <90>;
- vmmc-supply = <&vcc3v3_baseboard>;
- status = "okay";
-};
-
-&spi2 {
- cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&uart1 {
- /* alternate function of GPIO5/6 */
- status = "disabled";
-};
-
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&haikou_pin_hog>;
@@ -144,3 +103,38 @@
};
};
};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <25000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc3v3_baseboard>;
+ status = "okay";
+};
+
+&spi2 {
+ cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart1 {
+ /* alternate function of GPIO5/6 */
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-12-20 12:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 12:55 Johan Jonker [this message]
2019-12-28 7:47 ` [PATCH v2] arm64: dts: rockchip: rk3368-lion-haikou: remove identical &uart0 node Johan Jonker
2019-12-31 11:47 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220125520.29871-1-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).