linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: Maxime Ripard <mripard@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/7] [DO NOT MERGE] ARM: dts: sun8i-r40: bananapi-m2-ultra: Enable OV5640 camera
Date: Mon,  6 Jan 2020 16:42:40 +0800	[thread overview]
Message-ID: <20200106084240.1076-8-wens@kernel.org> (raw)
In-Reply-To: <20200106084240.1076-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

Bananapi offers a small OV5640 based camera module, attached via an FPC
connector.

Add the related regulator constraints, and hook everything up.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1ba1dc..86183d40c7af 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -113,6 +113,24 @@ &ahci {
 	status = "okay";
 };
 
+&csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi0_8bits_pins>;
+	status = "okay";
+
+	port {
+		/* Parallel bus endpoint */
+		csi0_from_ov5640: endpoint {
+			remote-endpoint = <&ov5640_to_csi0>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <1>; /* Active high */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
 &de {
 	status = "okay";
 };
@@ -164,6 +182,37 @@ axp22x: pmic@34 {
 
 #include "axp22x.dtsi"
 
+&i2c4 {
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi0_mclk_pin>;
+		clocks = <&ccu CLK_CSI0_MCLK>;
+		clock-names = "xclk";
+
+		reset-gpios = <&pio 8 7 GPIO_ACTIVE_LOW>; /* PI7 */
+		powerdown-gpios = <&pio 8 6 GPIO_ACTIVE_HIGH>; /* PI6 */
+		AVDD-supply = <&reg_aldo1>;
+		DOVDD-supply = <&reg_eldo1>;
+		DVDD-supply = <&reg_eldo2>;
+
+		port {
+			ov5640_to_csi0: endpoint {
+				remote-endpoint = <&csi0_from_ov5640>;
+				bus-width = <8>;
+				data-shift = <2>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <1>; /* Active high */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
@@ -209,6 +258,12 @@ &pio {
 	vcc-pg-supply = <&reg_dldo1>;
 };
 
+&reg_aldo1 {
+	regulator-name = "csi-avdd";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &reg_aldo2 {
 	regulator-min-microvolt = <2500000>;
 	regulator-max-microvolt = <2500000>;
@@ -289,6 +344,18 @@ &reg_dldo4 {
 	regulator-name = "vdd2v5-sata";
 };
 
+&reg_eldo1 {
+	regulator-name = "csi-iovcc";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&reg_eldo2 {
+	regulator-name = "csi-dvdd";
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
+
 &reg_eldo3 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
-- 
2.24.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-01-06  8:44 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-06  8:42 [PATCH v2 0/7] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support Chen-Yu Tsai
2020-01-06  8:42 ` [PATCH v2 1/7] ARM: dts: sun4i: Add CSI1 controller and pinmux options Chen-Yu Tsai
2020-01-06  8:42 ` [PATCH v2 2/7] ARM: dts: sun7i: " Chen-Yu Tsai
2020-01-06  8:42 ` [PATCH v2 3/7] dt-bindings: bus: sunxi: Add R40 MBUS compatible Chen-Yu Tsai
2020-01-06  8:51   ` Maxime Ripard
2020-03-12  5:36     ` Chen-Yu Tsai
2020-01-06  8:42 ` [PATCH v2 4/7] ARM: dts: sun8i: r40: Add device node for CSI0 Chen-Yu Tsai
2020-01-06  8:42 ` [PATCH v2 5/7] [DO NOT MERGE] ARM: dts: sun4i: cubieboard: Enable OV7670 camera on CSI1 Chen-Yu Tsai
2020-01-06  8:42 ` [PATCH v2 6/7] [DO NOT MERGE] ARM: dts: sun7i: cubieboard2: " Chen-Yu Tsai
2020-01-06  8:42 ` Chen-Yu Tsai [this message]
2020-01-06  8:52 ` [PATCH v2 0/7] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200106084240.1076-8-wens@kernel.org \
    --to=wens@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).