linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: Maxime Ripard <mripard@kernel.org>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH] drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
Date: Tue,  7 Jan 2020 15:01:13 +0800	[thread overview]
Message-ID: <20200107070113.28951-1-wens@kernel.org> (raw)

From: Chen-Yu Tsai <wens@csie.org>

In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.

However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.

Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.

This fixes the scrolling artifacts seen on my A13 tablet.

Fixes: 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 15 ++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 42651d737c55..c81cdce6ed55 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -489,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 
 	WARN_ON(!tcon->quirks->has_channel_0);
 
-	tcon->dclk_min_div = 1;
+	tcon->dclk_min_div = tcon->quirks->dclk_min_div;
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
@@ -1426,12 +1426,14 @@ static int sun8i_r40_tcon_tv_set_mux(struct sun4i_tcon *tcon,
 static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
 
 static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun5i_a13_tcon_set_mux,
 };
 
@@ -1440,6 +1442,7 @@ static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
 	.has_channel_1		= true,
 	.has_lvds_alt		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 	.set_mux		= sun6i_tcon_set_mux,
 };
 
@@ -1447,11 +1450,13 @@ static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	/* Same display pipeline structure as A10 */
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
@@ -1459,11 +1464,13 @@ static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
 	.has_channel_0		= true,
 	.has_lvds_alt		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
 	.supports_lvds		= true,
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
@@ -1477,11 +1484,13 @@ static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = {
 
 static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
-	.has_channel_0	= true,
-	.needs_edp_reset = true,
+	.has_channel_0		= true,
+	.needs_edp_reset	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index f9f1fe80b206..a62ec826ae71 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -224,6 +224,7 @@ struct sun4i_tcon_quirks {
 	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
 	bool    needs_edp_reset; /* a80 edp reset needed for tcon0 access */
 	bool	supports_lvds;   /* Does the TCON support an LVDS output? */
+	u8	dclk_min_div;	/* minimum divider for TCON0 DCLK */
 
 	/* callback to handle tcon muxing options */
 	int	(*set_mux)(struct sun4i_tcon *, const struct drm_encoder *);
-- 
2.24.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-01-07  7:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07  7:01 Chen-Yu Tsai [this message]
2020-01-07 15:06 ` [PATCH] drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200107070113.28951-1-wens@kernel.org \
    --to=wens@kernel.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).