From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Codrin.Ciubotariu@microchip.com
Cc: robh@kernel.org, alexandre.belloni@bootlin.com,
kamel.bouhara@bootlin.com, devicetree@vger.kernel.org,
wsa@the-dreams.de, linux-kernel@vger.kernel.org,
Ludovic.Desroches@microchip.com, linux-i2c@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/6] i2c: at91: Send bus clear command if SCL is down
Date: Thu, 9 Jan 2020 11:05:57 +0000 [thread overview]
Message-ID: <20200109110557.GO25745@shell.armlinux.org.uk> (raw)
In-Reply-To: <20200103094821.13185-4-codrin.ciubotariu@microchip.com>
On Fri, Jan 03, 2020 at 09:49:07AM +0000, Codrin.Ciubotariu@microchip.com wrote:
> After a transfer timeout, some faulty I2C slave devices might hold down
> the SCL pin. We can generate a bus clear command, hoping that the slave
> might release the pins.
>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> ---
>
> Changes in v2:
> - use CLEAR command only if SDA is down; update patch subject to
> reflect this;
Given this change, shouldn't the commit message above be updated?
> - CLEAR command is no longer used for sama5d2, only sam9x60;
>
> drivers/i2c/busses/i2c-at91-core.c | 9 ++++++++
> drivers/i2c/busses/i2c-at91-master.c | 32 +++++++++++++++++++++++-----
> drivers/i2c/busses/i2c-at91.h | 7 +++++-
> 3 files changed, 42 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
> index e13af4874976..128eafc05adb 100644
> --- a/drivers/i2c/busses/i2c-at91-core.c
> +++ b/drivers/i2c/busses/i2c-at91-core.c
> @@ -71,6 +71,7 @@ static struct at91_twi_pdata at91rm9200_config = {
> .has_dig_filtr = false,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static struct at91_twi_pdata at91sam9261_config = {
> @@ -82,6 +83,7 @@ static struct at91_twi_pdata at91sam9261_config = {
> .has_dig_filtr = false,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static struct at91_twi_pdata at91sam9260_config = {
> @@ -93,6 +95,7 @@ static struct at91_twi_pdata at91sam9260_config = {
> .has_dig_filtr = false,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static struct at91_twi_pdata at91sam9g20_config = {
> @@ -104,6 +107,7 @@ static struct at91_twi_pdata at91sam9g20_config = {
> .has_dig_filtr = false,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static struct at91_twi_pdata at91sam9g10_config = {
> @@ -115,6 +119,7 @@ static struct at91_twi_pdata at91sam9g10_config = {
> .has_dig_filtr = false,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static const struct platform_device_id at91_twi_devtypes[] = {
> @@ -148,6 +153,7 @@ static struct at91_twi_pdata at91sam9x5_config = {
> .has_dig_filtr = false,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static struct at91_twi_pdata sama5d4_config = {
> @@ -159,6 +165,7 @@ static struct at91_twi_pdata sama5d4_config = {
> .has_dig_filtr = true,
> .has_adv_dig_filtr = false,
> .has_ana_filtr = false,
> + .has_clear_cmd = false,
> };
>
> static struct at91_twi_pdata sama5d2_config = {
> @@ -170,6 +177,7 @@ static struct at91_twi_pdata sama5d2_config = {
> .has_dig_filtr = true,
> .has_adv_dig_filtr = true,
> .has_ana_filtr = true,
> + .has_clear_cmd = false, /* due to errata, CLEAR cmd is not working */
> };
>
> static struct at91_twi_pdata sam9x60_config = {
> @@ -181,6 +189,7 @@ static struct at91_twi_pdata sam9x60_config = {
> .has_dig_filtr = true,
> .has_adv_dig_filtr = true,
> .has_ana_filtr = true,
> + .has_clear_cmd = true,
> };
>
> static const struct of_device_id atmel_twi_dt_ids[] = {
> diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> index c55e8ff35201..8c4f20317847 100644
> --- a/drivers/i2c/busses/i2c-at91-master.c
> +++ b/drivers/i2c/busses/i2c-at91-master.c
> @@ -480,7 +480,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
> unsigned long time_left;
> bool has_unre_flag = dev->pdata->has_unre_flag;
> bool has_alt_cmd = dev->pdata->has_alt_cmd;
> - struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> + bool has_clear_cmd = dev->pdata->has_clear_cmd;
>
> /*
> * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
> @@ -641,10 +641,32 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
> AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
> }
>
> - if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
> - dev_dbg(dev->dev,
> - "SDA is down; clear bus using gpio\n");
> - i2c_recover_bus(&dev->adapter);
> + /*
> + * some faulty I2C slave devices might hold SDA down;
> + * we can send a bus clear command, hoping that the pins will be
> + * released
> + */
> + if (has_clear_cmd) {
> + if (!(dev->transfer_status & AT91_TWI_SDA)) {
> + dev_dbg(dev->dev,
> + "SDA is down; sending bus clear command\n");
> + if (dev->use_alt_cmd) {
> + unsigned int acr;
> +
> + acr = at91_twi_read(dev, AT91_TWI_ACR);
> + acr &= ~AT91_TWI_ACR_DATAL_MASK;
> + at91_twi_write(dev, AT91_TWI_ACR, acr);
> + }
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_CLEAR);
> + }
> + } else {
> + struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> +
> + if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
> + dev_dbg(dev->dev,
> + "SDA is down; clear bus using gpio\n");
> + i2c_recover_bus(&dev->adapter);
> + }
> }
>
> return ret;
> diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
> index eb335b71e775..80f77d523346 100644
> --- a/drivers/i2c/busses/i2c-at91.h
> +++ b/drivers/i2c/busses/i2c-at91.h
> @@ -36,6 +36,7 @@
> #define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
> #define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
> #define AT91_TWI_SWRST BIT(7) /* Software Reset */
> +#define AT91_TWI_CLEAR BIT(15) /* Bus clear command */
> #define AT91_TWI_ACMEN BIT(16) /* Alternative Command Mode Enable */
> #define AT91_TWI_ACMDIS BIT(17) /* Alternative Command Mode Disable */
> #define AT91_TWI_THRCLR BIT(24) /* Transmit Holding Register Clear */
> @@ -69,6 +70,8 @@
> #define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
> #define AT91_TWI_EOSACC BIT(11) /* End Of Slave Access */
> #define AT91_TWI_LOCK BIT(23) /* TWI Lock due to Frame Errors */
> +#define AT91_TWI_SCL BIT(24) /* TWI SCL status */
> +#define AT91_TWI_SDA BIT(25) /* TWI SDA status */
>
> #define AT91_TWI_INT_MASK \
> (AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK \
> @@ -81,7 +84,8 @@
> #define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
>
> #define AT91_TWI_ACR 0x0040 /* Alternative Command Register */
> -#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
> +#define AT91_TWI_ACR_DATAL_MASK GENMASK(15, 0)
> +#define AT91_TWI_ACR_DATAL(len) ((len) & AT91_TWI_ACR_DATAL_MASK)
> #define AT91_TWI_ACR_DIR BIT(8)
>
> #define AT91_TWI_FILTR 0x0044
> @@ -118,6 +122,7 @@ struct at91_twi_pdata {
> bool has_dig_filtr;
> bool has_adv_dig_filtr;
> bool has_ana_filtr;
> + bool has_clear_cmd;
> struct at_dma_slave dma_slave;
> };
>
> --
> 2.20.1
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-09 11:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 9:49 [PATCH v2 0/6] i2c bus recovery for Microchip SoCs Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 1/6] dt-bindings: i2c: at91: document optional bus recovery properties Codrin.Ciubotariu
2020-01-03 22:29 ` Rob Herring
2020-01-06 16:34 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 3/6] i2c: at91: Send bus clear command if SCL is down Codrin.Ciubotariu
2020-01-09 7:47 ` Ludovic Desroches
2020-01-09 10:58 ` Codrin.Ciubotariu
2020-01-09 11:05 ` Russell King - ARM Linux admin [this message]
2020-01-09 13:29 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 2/6] i2c: at91: implement i2c bus recovery Codrin.Ciubotariu
2020-01-09 7:48 ` Ludovic Desroches
2020-01-09 10:54 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 4/6] ARM: at91/dt: sama5d3: add i2c gpio pinctrl Codrin.Ciubotariu
2020-01-04 22:39 ` Peter Rosin
2020-01-06 16:58 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 5/6] ARM: at91/dt: sama5d4: " Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 6/6] ARM: at91/dt: sama5d2: " Codrin.Ciubotariu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200109110557.GO25745@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=Codrin.Ciubotariu@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).