* [GIT PULL] i.MX fixes for 5.5, round 2
@ 2020-01-10 1:18 Shawn Guo
0 siblings, 0 replies; only message in thread
From: Shawn Guo @ 2020-01-10 1:18 UTC (permalink / raw)
To: soc, arm
Cc: Stefan Agner, Li Yang, linux-imx, kernel, Fabio Estevam,
linux-arm-kernel
The following changes since commit 7947e3238b64c00c396e6f5738f94c4d653bc6a2:
ARM: imx: Fix boot crash if ocotp is not found (2019-12-12 10:44:28 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.5-2
for you to fetch changes up to 4b0b97e651ecf29f20248420b52b6864fbd40bc2:
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support (2020-01-09 19:21:53 +0800)
----------------------------------------------------------------
i.MX fixes for 5.5, round 2:
- Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0"
error seen with UART1.
- Correct compatible of RV3029 RTC device on imx6q-dhcom board.
- Correct interrupt trigger type for magnetometer on board
imx8mq-librem5-devkit.
- A series from Anson Huang to fix vdd3p0 power supplier for a few NXP
development board.
- Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so
that Ethernet interface on the board works properly.
- Fix Toradex Colibri board to get NAND flash support back.
- Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which
is connected to PMIC SW2 output rather than a fixed 3V3 rail.
- Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by
kernel.
- Fix endian setting for DCFG on LS1028A SoC, so that register access
of DCFG becomes correct.
----------------------------------------------------------------
Adam Ford (1):
arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm
Alexandre Belloni (1):
ARM: dts: imx6q-dhcom: fix rtc compatible
Angus Ainslie (Purism) (1):
arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer
Anson Huang (4):
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
Jagan Teki (1):
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
Marcel Ziswiler (1):
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
Marek Vasut (1):
ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection
Peng Fan (1):
ARM: dts: imx7ulp: fix reg of cpu node
Yinbo Zhu (1):
arm64: dts: ls1028a: fix endian setting for dcfg
arch/arm/boot/dts/imx6dl-icore-mipi.dts | 2 +-
arch/arm/boot/dts/imx6q-dhcom-pdk2.dts | 2 +-
arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ----
arch/arm/boot/dts/imx6sl-evk.dts | 4 ----
arch/arm/boot/dts/imx6sll-evk.dts | 4 ----
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ----
arch/arm/boot/dts/imx6sx-sdb.dts | 4 ----
arch/arm/boot/dts/imx7s-colibri.dtsi | 4 ++++
arch/arm/boot/dts/imx7ulp.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
13 files changed, 12 insertions(+), 28 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-01-10 1:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-01-10 1:18 [GIT PULL] i.MX fixes for 5.5, round 2 Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).