From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: arm@kernel.org, soc@kernel.org
Cc: Maulik Shah <mkshah@codeaurora.org>,
Taniya Das <tdas@codeaurora.org>,
Kiran Gunda <kgunda@codeaurora.org>,
Jeffrey Hugo <jeffrey.l.hugo@gmail.com>,
Sandeep Maheswaram <sanm@codeaurora.org>,
Stanimir Varbanov <stanimir.varbanov@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rajeshwari <rkambl@codeaurora.org>,
Lina Iyer <ilina@codeaurora.org>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
AngeloGioacchino Del Regno <kholk11@gmail.com>,
Matthias Kaehlcke <mka@chromium.org>,
Rob Clark <robdclark@chromium.org>,
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>,
Stephan Gerhold <stephan@gerhold.net>,
Kevin Hilman <khilman@baylibre.com>,
Andy Gross <agross@kernel.org>,
Sibi Sankar <sibis@codeaurora.org>,
Roja Rani Yarubandi <rojay@codeaurora.org>,
Arnd Bergmann <arnd@arndb.de>,
linux-arm-msm@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>,
Olof Johansson <olof@lixom.net>,
linux-arm-kernel@lists.infradead.org,
Loic Poulain <loic.poulain@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
Douglas Anderson <dianders@chromium.org>,
Amit Kucheria <amit.kucheria@linaro.org>,
Manu Gautam <mgautam@codeaurora.org>,
Vinod Koul <vkoul@kernel.org>,
Niklas Cassel <niklas.cassel@linaro.org>,
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Subject: [GIT PULL] Qualcomm ARM64 DT updates for v5.6
Date: Mon, 13 Jan 2020 12:42:25 -0800 [thread overview]
Message-ID: <20200113204225.GB3325@yoga> (raw)
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.6
for you to fetch changes up to f489b13dae02a0217b9702913074526d3669bdc8:
arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts (2020-01-13 11:45:51 -0800)
----------------------------------------------------------------
Qualcomm ARM64 DT updates for v5.6
* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404
----------------------------------------------------------------
Amit Kucheria (4):
arm64: dts: sdm845: thermal: Add critical interrupt support
arm64: dts: msm8916: thermal: Add interrupt support
arm64: dts: msm8996: thermal: Add critical interrupt support
arm64: dts: msm8998: thermal: Add critical interrupt support
AngeloGioacchino Del Regno (1):
arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids
Bjorn Andersson (15):
arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk
arm64: dts: qcom: db820c: Move non-soc entries out of /soc
arm64: dts: qcom: msm8996: Use node references in db820c
arm64: dts: qcom: msm8996: Move regulator consumers to db820c
arm64: dts: qcom: msm8996: Move regulators to db820c
arm64: dts: qcom: db820c: Group root nodes
arm64: dts: qcom: db820c: Sort all nodes
arm64: dts: qcom: db820c: Remove pin specific files
arm64: dts: qcom: msm8996: Pad addresses
arm64: dts: qcom: msm8996: Sort all nodes in msm8996.dtsi
arm64: dts: qcom: db820c: Use regulator names from schematics
arm64: dts: qcom: msm8996: Introduce IFC6640
arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
arm64: dts: qcom: sm8150: Hard code rpmhpd constants
Douglas Anderson (9):
arm64: dts: sc7180: Fix indentation/ordering of qspi nodes in sc7180-idp
arm64: dts: sc7180: Add a comment to i2c7 about external pullup
arm64: dts: qcom: sc7180: Add SoC name to compatible
arm64: dts: qcom: sc7180: Rename gic-its node to msi-controller
arm64: dts: qcom: sc7180: Add "#clock-cells" property to usb_1_ssphy
arm64: dts: qcom: pm6150: Remove macro from unit name of adc-chan
arm64: dts: qcom: sc7180: Avoid "phy" for USB QMP PHY wrapper
arm64: dts: qcom: sc7180: Fix I2C/UART numbers 2, 4, 7, and 9
arm64: dts: qcom: sdm845: Rename gic-its node to msi-controller
Jeffrey Hugo (6):
arm64: dts: qcom: msm8998: Add anoc2 smmu node
arm64: dts: qcom: msm8998: Add wifi node
arm64: dts: qcom: msm8998: Fix tcsr syscon size
arm64: dts: qcom: msm8998: Add gpucc node
arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth
arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator
Jorge Ramirez-Ortiz (4):
arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
arm64: dts: qcom: qcs404: Add HFPLL node
arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
arm64: dts: qcom: qcs404: Add DVFS support
Kiran Gunda (3):
arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
arm64: dts: qcom: sc7180-idp: Add RPMh regulators
Lina Iyer (2):
arm64: dts: qcom: add PDC interrupt controller for SDM845
arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845
Loic Poulain (2):
arm: dts: qcom: db410c: Enable USB OTG support
arm64: dts: apq8096-db820c: Fix VDD core voltage
Manu Gautam (1):
arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core
Matthias Kaehlcke (1):
arm64: dts: qcom: sc7180: Fix node order
Maulik Shah (4):
arm64: dts: qcom: sc7180: Add cmd_db reserved area
arm64: dts: qcom: sc7180: Add rpmh-rsc node
arm64: dts: qcom: sc7180: Add pdc interrupt controller
arm64: dts: qcom: sc7180: Add wakeup parent for TLMM
Niklas Cassel (2):
arm64: dts: qcom: qcs404: Add CPR and populate OPP table
arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode
Rajendra Nayak (4):
dt-bindings: qcom: Add SC7180 bindings
arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
arm64: dts: sc7180: Remove additional spi chip select muxes
arm64: dts: sc7180: Add aliases for all i2c and spi devices
Rajeshwari (2):
arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180
Rob Clark (1):
arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
Roja Rani Yarubandi (1):
arm64: dts: sc7180: Add qupv3_0 and qupv3_1
Sai Prakash Ranjan (5):
arm64: dts: sdm845: Update the device tree node for LLCC
arm64: dts: qcom: sc7180: Add APSS watchdog node
arm64: dts: qcom: sm8150: Add APSS watchdog node
arm64: dts: qcom: sc7180: Add Last level cache controller node
arm64: dts: qcom: qcs404: Update the compatible for watchdog timer
Sandeep Maheswaram (1):
arm64: dts: qcom: sc7180: Add USB related nodes
Sibi Sankar (8):
arm64: dts: sm8150: Add rpmh power-domain node
arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI smp2p
arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocs
arm64: dts: qcom: sm8150: Add cpufreq HW device node
arm64: dts: qcom: sc7180: Add remoteproc enablers
arm64: dts: qcom: msm8998: Update reserved memory map
arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes
arm64: dts: qcom: sc7180: Add rpmh power-domain node
Stanimir Varbanov (1):
arm64: dts: qcom: msm8996: Fix venus iommu nodename error
Stephan Gerhold (1):
arm64: dts: qcom: pm8916: Add vibration motor node
Stephen Boyd (1):
arm64: dts: qcom: sdm845-cheza: Add cr50 spi node
Taniya Das (2):
arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver
arm64: dts: sc7180: Add cpufreq HW node for cpu scaling
Vinod Koul (6):
arm64: dts: qcom: Use gcc clock enums
arm64: dts: qcom: sm8150: Add ufs nodes
arm64: dts: qcom: sm8150-mtp: Enable UFS nodes
arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
arm64: dts: qcom: sm8150: Fix UFS phy register size
arm64: dts: qcom: sdm845: add the ufs reset
Vivek Gautam (1):
arm64: dts: sc7180: Add device node for apps_smmu
Documentation/devicetree/bindings/arm/qcom.yaml | 44 +-
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 19 +
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 11 +-
arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi | 109 -
.../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 92 -
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 1408 +++++---
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 385 +++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3530 ++++++++++----------
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 49 +
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 41 +
arch/arm64/boot/dts/qcom/msm8998-pins.dtsi | 25 +-
arch/arm64/boot/dts/qcom/msm8998.dtsi | 262 +-
arch/arm64/boot/dts/qcom/pm6150.dtsi | 72 +
arch/arm64/boot/dts/qcom/pm6150l.dtsi | 31 +
arch/arm64/boot/dts/qcom/pm8004.dtsi | 10 +-
arch/arm64/boot/dts/qcom/pm8916.dtsi | 6 +
arch/arm64/boot/dts/qcom/pm8994.dtsi | 4 +
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 1 +
arch/arm64/boot/dts/qcom/qcs404.dtsi | 160 +-
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 430 +++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2187 ++++++++++++
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 15 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 18 +-
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 7 +
arch/arm64/boot/dts/qcom/sdm845.dtsi | 32 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 7 +
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 35 +
arch/arm64/boot/dts/qcom/sm8150.dtsi | 391 ++-
30 files changed, 6766 insertions(+), 2622 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
reply other threads:[~2020-01-13 20:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200113204225.GB3325@yoga \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@linaro.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=dianders@chromium.org \
--cc=ilina@codeaurora.org \
--cc=jeffrey.l.hugo@gmail.com \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=kgunda@codeaurora.org \
--cc=khilman@baylibre.com \
--cc=kholk11@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mgautam@codeaurora.org \
--cc=mka@chromium.org \
--cc=mkshah@codeaurora.org \
--cc=niklas.cassel@linaro.org \
--cc=olof@lixom.net \
--cc=rkambl@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=robdclark@chromium.org \
--cc=rojay@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sanm@codeaurora.org \
--cc=sibis@codeaurora.org \
--cc=soc@kernel.org \
--cc=stanimir.varbanov@linaro.org \
--cc=stephan@gerhold.net \
--cc=swboyd@chromium.org \
--cc=tdas@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox