linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Erwan Le Ray <erwan.leray@st.com>,
	linux-serial@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 4.19 373/671] serial: stm32: fix word length configuration
Date: Thu, 16 Jan 2020 12:00:11 -0500	[thread overview]
Message-ID: <20200116170509.12787-110-sashal@kernel.org> (raw)
In-Reply-To: <20200116170509.12787-1-sashal@kernel.org>

From: Erwan Le Ray <erwan.leray@st.com>

[ Upstream commit c8a9d043947b4acb19a65f7fac2bd0893e581cd5 ]

STM32 supports either:
- 8 and 9 bits word length (including parity bit) for stm32f4 compatible
  devices
- 7, 8 and 9 bits word length (including parity bit) for stm32f7 and
  stm32h7 compatible devices.

As a consequence STM32 supports the following termios configurations:
- CS7 with parity bit, and CS8 (with or without parity bit) for stm32f4
  compatible devices.
- CS6 with parity bit, CS7 and CS8 (with or without parity bit) for
  stm32f7 and stm32h7 compatible devices.

This patch is fixing word length by configuring correctly the SoC with
supported configurations.

Fixes: ada8618ff3bf ("serial: stm32: adding support for stm32f7")
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/stm32-usart.c | 56 ++++++++++++++++++++++++++++----
 drivers/tty/serial/stm32-usart.h |  3 +-
 2 files changed, 50 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index e8d7a7bb4339..e8321850938a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -599,6 +599,36 @@ static void stm32_shutdown(struct uart_port *port)
 	free_irq(port->irq, port);
 }
 
+unsigned int stm32_get_databits(struct ktermios *termios)
+{
+	unsigned int bits;
+
+	tcflag_t cflag = termios->c_cflag;
+
+	switch (cflag & CSIZE) {
+	/*
+	 * CSIZE settings are not necessarily supported in hardware.
+	 * CSIZE unsupported configurations are handled here to set word length
+	 * to 8 bits word as default configuration and to print debug message.
+	 */
+	case CS5:
+		bits = 5;
+		break;
+	case CS6:
+		bits = 6;
+		break;
+	case CS7:
+		bits = 7;
+		break;
+	/* default including CS8 */
+	default:
+		bits = 8;
+		break;
+	}
+
+	return bits;
+}
+
 static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
@@ -606,7 +636,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
 	struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	struct stm32_usart_config *cfg = &stm32_port->info->cfg;
 	struct serial_rs485 *rs485conf = &port->rs485;
-	unsigned int baud;
+	unsigned int baud, bits;
 	u32 usartdiv, mantissa, fraction, oversampling;
 	tcflag_t cflag = termios->c_cflag;
 	u32 cr1, cr2, cr3;
@@ -632,16 +662,28 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (cflag & CSTOPB)
 		cr2 |= USART_CR2_STOP_2B;
 
+	bits = stm32_get_databits(termios);
+
 	if (cflag & PARENB) {
+		bits++;
 		cr1 |= USART_CR1_PCE;
-		if ((cflag & CSIZE) == CS8) {
-			if (cfg->has_7bits_data)
-				cr1 |= USART_CR1_M0;
-			else
-				cr1 |= USART_CR1_M;
-		}
 	}
 
+	/*
+	 * Word length configuration:
+	 * CS8 + parity, 9 bits word aka [M1:M0] = 0b01
+	 * CS7 or (CS6 + parity), 7 bits word aka [M1:M0] = 0b10
+	 * CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00
+	 * M0 and M1 already cleared by cr1 initialization.
+	 */
+	if (bits == 9)
+		cr1 |= USART_CR1_M0;
+	else if ((bits == 7) && cfg->has_7bits_data)
+		cr1 |= USART_CR1_M1;
+	else if (bits != 8)
+		dev_dbg(port->dev, "Unsupported data bits config: %u bits\n"
+			, bits);
+
 	if (cflag & PARODD)
 		cr1 |= USART_CR1_PS;
 
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 6f294e280ea3..a70aa5006ab9 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -151,8 +151,7 @@ struct stm32_usart_info stm32h7_info = {
 #define USART_CR1_PS		BIT(9)
 #define USART_CR1_PCE		BIT(10)
 #define USART_CR1_WAKE		BIT(11)
-#define USART_CR1_M		BIT(12)
-#define USART_CR1_M0		BIT(12)		/* F7 */
+#define USART_CR1_M0		BIT(12)		/* F7 (CR1_M for F4) */
 #define USART_CR1_MME		BIT(13)		/* F7 */
 #define USART_CR1_CMIE		BIT(14)		/* F7 */
 #define USART_CR1_OVER8		BIT(15)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-01-16 17:24 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200116170509.12787-1-sashal@kernel.org>
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 273/671] soc/fsl/qe: Fix an error code in qe_pin_request() Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 274/671] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 276/671] arm64/vdso: don't leak kernel addresses Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 278/671] rtc: mt6397: Don't call irq_dispose_mapping Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 287/671] firmware: arm_scmi: fix of_node leak in scmi_mailbox_check Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 291/671] ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data" Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 292/671] PCI: rockchip: Fix rockchip_pcie_ep_assert_intx() bitwise operations Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 298/671] soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 305/671] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 313/671] coresight: catu: fix clang build warning Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 321/671] PCI: iproc: Enable iProc config read for PAXBv2 Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 350/671] pwm: meson: Consider 128 a valid pre-divider Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 351/671] pwm: meson: Don't disable PWM when setting duty repeatedly Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 352/671] ARM: riscpc: fix lack of keyboard interrupts after irq conversion Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 364/671] ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 365/671] clk: meson: gxbb: no spread spectrum on mpll0 Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 366/671] clk: meson: axg: spread spectrum is on mpll2 Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 368/671] arm64: dts: meson: libretech-cc: set eMMC as removable Sasha Levin
2020-01-16 17:00 ` Sasha Levin [this message]
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 374/671] serial: stm32: fix rx error handling Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 375/671] serial: stm32: fix rx data length when parity enabled Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 376/671] serial: stm32: fix transmit_chars when tx is stopped Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 377/671] serial: stm32: Add support of TC bit status check Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 378/671] serial: stm32: fix wakeup source initialization Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 394/671] cpufreq: brcmstb-avs-cpufreq: Fix initial command check Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 395/671] cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 396/671] clk: sunxi-ng: sun50i-h6-r: Fix incorrect W1 clock gate register Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 402/671] serial: stm32: fix a recursive locking in stm32_config_rs485 Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 403/671] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 404/671] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 407/671] firmware: arm_scmi: fix bitfield definitions for SENSOR_DESC attributes Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 408/671] firmware: arm_scmi: update rate_discrete in clock_describe_rates_get Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 410/671] ASoC: meson: axg-tdmin: right_j is not supported Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 411/671] ASoC: meson: axg-tdmout: " Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 429/671] arm64: dts: allwinner: h6: Pine H64: Add interrupt line for RTC Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 435/671] nvmem: imx-ocotp: Ensure WAIT bits are preserved when setting timing Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 436/671] nvmem: imx-ocotp: Change TIMING calculation to u-boot algorithm Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 462/671] ARM: stm32: use "depends on" instead of "if" after prompt Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 466/671] clk: sunxi-ng: v3s: add the missing PLL_DDR1 Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 478/671] ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 500/671] ASoC: sun4i-i2s: RX and TX counter registers are swapped Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 505/671] media: atmel: atmel-isi: fix timeout value for stop streaming Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 506/671] ARM: 8896/1: VDSO: Don't leak kernel addresses Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 510/671] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 528/671] ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 546/671] pinctrl: iproc-gpio: Fix incorrect pinconf configurations Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 547/671] gpio/aspeed: Fix incorrect number of banks Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 556/671] clk: actions: Fix factor clk struct member access Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 567/671] net: stmmac: dwmac-meson8b: Fix signedness bug in probe Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 568/671] net: axienet: fix a " Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 571/671] net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse() Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 575/671] net: stmmac: gmac4+: Not all Unicast addresses may be available Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 583/671] net: stmmac: fix length of PTP clock's name string Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 584/671] net: stmmac: fix disabling flexible PPS output Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 597/671] dmaengine: imx-sdma: fix size check for sdma script_number Sasha Levin
2020-01-16 17:03 ` [PATCH AUTOSEL 4.19 599/671] arm64: hibernate: check pgd table allocation Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 611/671] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 617/671] hwrng: omap3-rom - Fix missing clock by probing with device tree Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 619/671] arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled node Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 623/671] spi: atmel: fix handling of cs_change set on non-last xfer Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 627/671] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 634/671] media: exynos4-is: Fix recursive locking in isp_video_release() Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 640/671] rtc: brcmstb-waketimer: add missed clk_disable_unprepare Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 643/671] i2c: stm32f7: report dma error during probe Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 645/671] tty: serial: imx: use the sg count from dma_map_sg Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 658/671] crypto: sun4i-ss - fix big endian issues Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 660/671] arm64: dts: juno: Fix UART frequency Sasha Levin
2020-01-16 17:05 ` [PATCH AUTOSEL 4.19 663/671] Revert "arm64: dts: juno: add dma-ranges property" Sasha Levin
2020-01-16 17:05 ` [PATCH AUTOSEL 4.19 667/671] soc: aspeed: Fix snoop_file_poll()'s return type Sasha Levin
2020-01-16 17:05 ` [PATCH AUTOSEL 4.19 670/671] serial: stm32: fix clearing interrupt error flags Sasha Levin
2020-01-16 17:05 ` [PATCH AUTOSEL 4.19 671/671] arm64: dts: meson-gxm-khadas-vim2: fix uart_A bluetooth node Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116170509.12787-110-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=erwan.leray@st.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).