From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
Florian Fainelli <f.fainelli@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org,
Heiner Kallweit <hkallweit1@gmail.com>
Subject: Re: [RFC net-next 6/8] net: phylink: Configure MAC/PCS when link is up without PHY
Date: Mon, 27 Jan 2020 11:21:02 +0000 [thread overview]
Message-ID: <20200127112102.GT25745@shell.armlinux.org.uk> (raw)
In-Reply-To: <9a2136885d9a892ff170be88fdffeda82c778a10.1580122909.git.Jose.Abreu@synopsys.com>
On Mon, Jan 27, 2020 at 12:09:11PM +0100, Jose Abreu wrote:
> When we don't have any real PHY driver connected and we get link up from
> PCS we shall configure MAC and PCS for the desired speed and also
> resolve the flow control settings from MAC side.
This is certainly the wrong place for it. Please hold off on this patch
for the time being. Thanks.
>
> Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
>
> ---
> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Cc: Jose Abreu <joabreu@synopsys.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Heiner Kallweit <hkallweit1@gmail.com>
> Cc: netdev@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/net/phy/phylink.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 4174d874b1f7..75dbaf80d7a5 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -533,10 +533,20 @@ static void phylink_resolve(struct work_struct *w)
>
> if (link_changed) {
> pl->old_link_state = link_state.link;
> - if (!link_state.link)
> + if (!link_state.link) {
> phylink_mac_link_down(pl);
> - else
> + } else {
> + /* If no PHY is connected, we still need to configure
> + * MAC/PCS for flow control and speed.
> + */
> + if (!pl->phydev) {
> + phylink_resolve_flow(pl, &link_state);
> + phylink_mac_config(pl, &link_state);
> + }
> +
> phylink_mac_link_up(pl, link_state);
> + }
> +
> }
> if (!link_state.link && pl->mac_link_dropped) {
> pl->mac_link_dropped = false;
> --
> 2.7.4
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-27 11:21 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-27 11:09 [RFC net-next 0/8] net: Add support for Synopsys DesignWare XPCS Jose Abreu
2020-01-27 11:09 ` [RFC net-next 1/8] net: stmmac: selftests: Do not fail if PHY is not attached Jose Abreu
2020-01-27 11:09 ` [RFC net-next 2/8] net: phylink: Add phylink_and and phylink_andnot Helpers Jose Abreu
2020-01-27 11:16 ` Russell King - ARM Linux admin
2020-01-27 11:09 ` [RFC net-next 3/8] net: stmmac: Switch to phylink_and()/phylink_andnot() Jose Abreu
2020-01-27 11:09 ` [RFC net-next 4/8] net: stmmac: Fallback to dev_fwnode() if needed Jose Abreu
2020-01-27 11:09 ` [RFC net-next 5/8] net: phylink: Add missing Backplane speeds Jose Abreu
2020-01-27 11:09 ` [RFC net-next 6/8] net: phylink: Configure MAC/PCS when link is up without PHY Jose Abreu
2020-01-27 11:21 ` Russell King - ARM Linux admin [this message]
2020-01-27 11:38 ` Jose Abreu
2020-01-27 11:46 ` Russell King - ARM Linux admin
2020-01-27 12:50 ` Jose Abreu
2020-01-27 13:37 ` Russell King - ARM Linux admin
2020-01-27 13:57 ` Jose Abreu
2020-01-27 14:00 ` Andrew Lunn
2020-01-27 14:08 ` Russell King - ARM Linux admin
2020-01-27 14:51 ` Andrew Lunn
2020-01-27 16:11 ` Russell King - ARM Linux admin
2020-01-27 16:22 ` Andrew Lunn
2020-01-27 19:28 ` Heiner Kallweit
2020-01-28 11:12 ` Jose Abreu
2020-02-04 17:26 ` Russell King - ARM Linux admin
2020-02-04 17:43 ` Andrew Lunn
2020-02-04 19:32 ` Russell King - ARM Linux admin
2020-02-05 12:27 ` Russell King - ARM Linux admin
2020-02-07 11:21 ` Russell King - ARM Linux admin
2020-01-27 16:32 ` Andrew Lunn
2020-01-27 17:56 ` Russell King - ARM Linux admin
2020-01-28 18:08 ` Russell King - ARM Linux admin
2020-01-28 18:25 ` Andrew Lunn
2020-01-27 11:09 ` [RFC net-next 7/8] net: phy: Add Synopsys DesignWare XPCS MDIO module Jose Abreu
2020-01-27 11:09 ` [RFC net-next 8/8] net: stmmac: Integrate it with DesignWare XPCS Jose Abreu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200127112102.GT25745@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=Joao.Pinto@synopsys.com \
--cc=Jose.Abreu@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).