linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Daniel Baluta (OSS)" <daniel.baluta@oss.nxp.com>
To: "broonie@kernel.org" <broonie@kernel.org>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"pierre-louis.bossart@linux.intel.com"
	<pierre-louis.bossart@linux.intel.com>,
	Paul Olaru <paul.olaru@nxp.com>, dl-linux-imx <linux-imx@nxp.com>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 2/4] ASoC: SOF: imx8: Add ops for i.MX8QM
Date: Tue, 28 Jan 2020 08:06:32 +0000	[thread overview]
Message-ID: <20200128080518.29970-3-daniel.baluta@oss.nxp.com> (raw)
In-Reply-To: <20200128080518.29970-1-daniel.baluta@oss.nxp.com>

From: Paul Olaru <paul.olaru@nxp.com>

i.MX8QM and i.MX8QXP are mostly identical platforms with minor hardware
differences. One of these differences affects the firmware boot process,
requiring the run operation to differ. All other ops are reused.

Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 sound/soc/sof/imx/imx8.c | 51 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c
index 94481adc2240..a849a9380d88 100644
--- a/sound/soc/sof/imx/imx8.c
+++ b/sound/soc/sof/imx/imx8.c
@@ -178,6 +178,24 @@ static int imx8x_run(struct snd_sof_dev *sdev)
 	return 0;
 }
 
+static int imx8_run(struct snd_sof_dev *sdev)
+{
+	struct imx8_priv *dsp_priv = (struct imx8_priv *)sdev->private;
+	int ret;
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_SEL, 0);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset source select\n");
+		return ret;
+	}
+
+	imx_sc_pm_cpu_start(dsp_priv->sc_ipc, IMX_SC_R_DSP, true,
+			    RESET_VECTOR_VADDR);
+
+	return 0;
+}
+
 static int imx8_probe(struct snd_sof_dev *sdev)
 {
 	struct platform_device *pdev =
@@ -361,6 +379,39 @@ static struct snd_soc_dai_driver imx8_dai[] = {
 },
 };
 
+/* i.MX8 ops */
+struct snd_sof_dsp_ops sof_imx8_ops = {
+	/* probe and remove */
+	.probe		= imx8_probe,
+	.remove		= imx8_remove,
+	/* DSP core boot */
+	.run		= imx8_run,
+
+	/* Block IO */
+	.block_read	= sof_block_read,
+	.block_write	= sof_block_write,
+
+	/* ipc */
+	.send_msg	= imx8_send_msg,
+	.fw_ready	= sof_fw_ready,
+	.get_mailbox_offset	= imx8_get_mailbox_offset,
+	.get_window_offset	= imx8_get_window_offset,
+
+	.ipc_msg_data	= imx8_ipc_msg_data,
+	.ipc_pcm_params	= imx8_ipc_pcm_params,
+
+	/* module loading */
+	.load_module	= snd_sof_parse_module_memcpy,
+	.get_bar_index	= imx8_get_bar_index,
+	/* firmware loading */
+	.load_firmware	= snd_sof_load_firmware_memcpy,
+
+	/* DAI drivers */
+	.drv = imx8_dai,
+	.num_drv = 1, /* we have only 1 ESAI interface on i.MX8 */
+};
+EXPORT_SYMBOL(sof_imx8_ops);
+
 /* i.MX8X ops */
 struct snd_sof_dsp_ops sof_imx8x_ops = {
 	/* probe and remove */
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-01-28  8:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-28  8:06 [PATCH 0/4] Add a better separation between i.MX8 families Daniel Baluta (OSS)
2020-01-28  8:06 ` [PATCH 1/4] ASoC: SOF: Rename i.MX8 platform to i.MX8X Daniel Baluta (OSS)
2020-01-28  8:06 ` Daniel Baluta (OSS) [this message]
2020-01-28  8:06 ` [PATCH 3/4] ASoC: SOF: Add i.MX8QM device descriptor Daniel Baluta (OSS)
2020-01-28  8:06 ` [PATCH 4/4] dt-bindings: dsp: fsl: Add fsl,imx8qm-dsp entry Daniel Baluta (OSS)
2020-01-28 16:08 ` [PATCH 0/4] Add a better separation between i.MX8 families Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200128080518.29970-3-daniel.baluta@oss.nxp.com \
    --to=daniel.baluta@oss.nxp.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=festevam@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paul.olaru@nxp.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).