public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Amelie Delaunay <amelie.delaunay@st.com>
To: Vinod Koul <vkoul@kernel.org>,
	Dan Williams <dan.j.williams@intel.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>,
	linux-kernel@vger.kernel.org,
	Pierre-Yves MORDRET <pierre-yves.mordret@st.com>,
	dmaengine@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/8] dmaengine: stm32-dma: fix sleeping function called from invalid context
Date: Wed, 29 Jan 2020 16:36:27 +0100	[thread overview]
Message-ID: <20200129153628.29329-8-amelie.delaunay@st.com> (raw)
In-Reply-To: <20200129153628.29329-1-amelie.delaunay@st.com>

This patch fixes BUG: sleeping function called from invalid context in
stm32_dma_disable_chan function.

The goal of this function is to force channel disable if it has not been
disabled by hardware. This consists in clearing STM32_DMA_SCR_EN bit and
read it as 0 to ensure the channel is well disabled and the last transfer
is over.

In previous implementation, the waiting loop was based on a do...while (1)
with a call to cond_resched to give the scheduler a chance to run a higher
priority process.

But in some conditions, stm32_dma_disable_chan can be called while
preemption is disabled, on a stm32_dma_stop call for example. So
cond_resched must not be used.

To avoid this, use readl_relaxed_poll_timeout_atomic to poll
STM32_DMA_SCR_EN bit cleared.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 drivers/dma/stm32-dma.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 01a2374ae03a..b585e11c2168 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -15,6 +15,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -421,29 +422,19 @@ static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
 static int stm32_dma_disable_chan(struct stm32_dma_chan *chan)
 {
 	struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
-	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
-	u32 dma_scr, id;
+	u32 dma_scr, id, reg;
 
 	id = chan->id;
-	dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
+	reg = STM32_DMA_SCR(id);
+	dma_scr = stm32_dma_read(dmadev, reg);
 
 	if (dma_scr & STM32_DMA_SCR_EN) {
 		dma_scr &= ~STM32_DMA_SCR_EN;
-		stm32_dma_write(dmadev, STM32_DMA_SCR(id), dma_scr);
-
-		do {
-			dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
-			dma_scr &= STM32_DMA_SCR_EN;
-			if (!dma_scr)
-				break;
-
-			if (time_after_eq(jiffies, timeout)) {
-				dev_err(chan2dev(chan), "%s: timeout!\n",
-					__func__);
-				return -EBUSY;
-			}
-			cond_resched();
-		} while (1);
+		stm32_dma_write(dmadev, reg, dma_scr);
+
+		return readl_relaxed_poll_timeout_atomic(dmadev->base + reg,
+					dma_scr, !(dma_scr & STM32_DMA_SCR_EN),
+					10, 1000000);
 	}
 
 	return 0;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-01-29 15:38 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-29 15:36 [PATCH 0/8] STM32 DMA driver fixes and improvements Amelie Delaunay
2020-01-29 15:36 ` [PATCH 1/8] dmaengine: stm32-dma: add suspend/resume power management support Amelie Delaunay
2020-01-29 15:36 ` [PATCH 2/8] dmaengine: stm32-dma: use reset controller only at probe time Amelie Delaunay
2020-01-29 15:36 ` [PATCH 3/8] dmaengine: stm32-dma: driver defers probe for reset Amelie Delaunay
2020-01-29 15:36 ` [PATCH 4/8] dmaengine: stm32-dma: enable descriptor_reuse Amelie Delaunay
2020-01-29 15:36 ` [PATCH 5/8] dmaengine: stm32-dma: use dma_set_max_seg_size to set the sg limit Amelie Delaunay
2020-01-29 15:36 ` [PATCH 6/8] dmaengine: stm32-dma: add copy_align constraint Amelie Delaunay
2020-01-29 15:36 ` Amelie Delaunay [this message]
2020-01-29 15:36 ` [PATCH 8/8] dmaengine: stm32-dma: use vchan_terminate_vdesc() in .terminate_all Amelie Delaunay
2020-02-25  5:45 ` [PATCH 0/8] STM32 DMA driver fixes and improvements Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200129153628.29329-8-amelie.delaunay@st.com \
    --to=amelie.delaunay@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=pierre-yves.mordret@st.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox