* Re: [PATCH 2/2] ARM: dts: imx6sll: Add the Kobo Aura H2O Edition 2
[not found] <20190909175927.4980-1-GNUtoo@cyberdimension.org>
@ 2020-02-04 7:05 ` Andreas Kemnade
0 siblings, 0 replies; only message in thread
From: Andreas Kemnade @ 2020-02-04 7:05 UTC (permalink / raw)
To: Denis 'GNUtoo' Carikli, shawnguo, s.hauer, robh+dt,
kernel, festevam, linux-imx, linux-kernel, linux-arm-kernel
Cc: devicetree, Rob Herring
[-- Attachment #1.1: Type: text/plain, Size: 9634 bytes --]
Hi,
hmm, you do not have any arm folks on the recipient list.
So nobody of them will review... There is always a cooperation
between devicetree maintainers and maintainers from the hardware
you are describing.
get_maintainer.pl should give you something. I have expanded the list
of recipients.
On Mon, 9 Sep 2019 19:59:27 +0200
Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> wrote:
> This work is based on the devicetree that can be found
> in the source code published by the device vendor[1],
> and on testing on the hardware as not all the parts
> described in the vendor's imx6sll-e60qm2.dts are populated
> on the PCB.
>
> [1]: https://github.com/kobolabs/Kobo-Reader/blob/master/hw/imx6sll-aurah2o2-aura/kernel.tar.bz2
>
> Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6sll-aura-h2o-2.dts | 258 +++++++++++++++++++++++
> 2 files changed, 259 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6sll-aura-h2o-2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9159fa2cea90..67a568a66e49 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -551,6 +551,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
> imx6sl-evk.dtb \
> imx6sl-warp.dtb
> dtb-$(CONFIG_SOC_IMX6SLL) += \
> + imx6sll-aura-h2o-2 \
.dtb?
Needs to be rebased anyways.
> imx6sll-evk.dtb
> dtb-$(CONFIG_SOC_IMX6SX) += \
> imx6sx-nitrogen6sx.dtb \
> diff --git a/arch/arm/boot/dts/imx6sll-aura-h2o-2.dts b/arch/arm/boot/dts/imx6sll-aura-h2o-2.dts
> new file mode 100644
> index 000000000000..5989866bb043
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sll-aura-h2o-2.dts
> @@ -0,0 +1,258 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Copyright (C) 2019 Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
> + */
> +
Maybe some description of the board here, like marking of PCBs,
so others can recognize devices sold with other brand names but
the same pcb if there exist any such.
According to
https://ia801006.us.archive.org/6/items/kobo_aura_H2O_edition_2_pcb_01.jpeg/kobo_aura_H2O_edition_2_pcb_01.jpeg
there is Start of serials: 60QM2 (you have seen this somewhere else)
some mark on the PCB: 37NB-E60QM0
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "imx6sll.dtsi"
> +
> +/ {
> + model = "Kobo Aura H2O Edition 2";
> + compatible = "kobo,aura-h2o-2", "fsl,imx6sll";
> +
do we have a imx6sl-variant here?
like Kobo Clara HD (with imx6sll, in v5.5) vs. Tolino Shine 3 (imx6sl, accepted for w5.6-rc1)?
These things are pin-compatible.
Just wild gessing, Maybe Tonlino Forma something? There seems to be no support
in the tolino sources for imx6sll at all, so chances are high that these devices
all have imx6sl.
Then we should do a split of pinmux vs. other stuff in a .dtsi. to prepare for
that.
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led>;
> +
> + user {
> + label = "GLED";
should get a better name, so it can be better understood what it is for.
Is it a LED on the power button? The older Kobo aura in
imx50-kobo-aura.dts has
kobo_aura:orange:on
e60k02.dtsi (used by the Kobo Clara HD and the Tolino Shine 3) has
e60k02:white:on
> + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "timer";
> + };
> + };
> +};
> +
> +&cpu0 {
> + arm-supply = <®_dcdc3>;
> + soc-supply = <®_dcdc1>;
> +};
> +
> +&gpc {
> + fsl,ldo-bypass = <1>;
> +};
> +
maybe you should add the other busses and comment what devices
are on it, so if someone starts working on these chips, it is easier to
find
allies and testers.
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + ricoh_rc5t619@32 {
rather name it by function:
pmic@32
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ricoh_rc5t619>;
> + compatible = "ricoh,rc5t619";
> + reg = <0x32>;
> + system-power-controller;
> +
> + regulators {
> + reg_dcdc1: DCDC1 {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
Please add a newline between properties and child nodes.
Same for the other regulators.
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + DCDC2 {
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + reg_dcdc3: DCDC3 {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1140000>;
> + };
> + };
> +
> + DCDC4 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1140000>;
> + };
> + };
> +
> + DCDC5 {
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1700000>;
> + };
> + };
> +
> + LDO1 {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO2 {
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + LDO3 {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO4 {
> + regulator-boot-on;
> + };
> +
> + LDO5 {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO6 {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO7 {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO9 {
> + regulator-boot-on;
> + };
> +
> + LDO10 {
> + regulator-boot-on;
> + };
> +
> + LDORTC1 {
> + regulator-boot-on;
> + };
> +
> + LDORTC2 {
> + regulator-boot-on;
Sure about this one? Maybe check the corresponding bit in uboot.
Well, should not be that problematic because there is a bug fixed which
turns it off. I guess just dropping this one is helpful.
> + };
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
> + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_led: ledgrp {
> + fsl,pins = <
> + MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
> + >;
> + };
> +
> + pinctrl_ricoh_rc5t619: ricoh_rc5t619_grp {
Hyphens are used in node names (not in the labels).
> + fsl,pins = <
> + /* chg */
> + MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x1b8b1
> + /* irq */
> + MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1
> + /* bat_low_int */
> + MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
> + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
> + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x17059
> + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
> + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
> + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
> + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
> + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x17059
> + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x17059
> + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x17059
> + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x17059
> + >;
> + };
> +
> + pinctrl_usbotg1: usbotg1grp {
> + fsl,pins = <
> + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
> + >;
> + };
> +};
> +
> +&snvs_poweroff {
> + status = "disabled";
> +};
> +
already disabled in imx6sll.dtsi
> +&snvs_pwrkey {
> + status = "disabled";
> +};
> +
ditto.
Maybe you should disable snvs_rtc. Since you have the system-power-controller
flag for the pmic, I guess the RTC in the SoC cannot work,
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +
> +&usdhc1 {
What is that. An eMMC?
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + bus-width = <8>;
> + no-1-8-v;
> + non-removable;
grr, hacking unfriendly. Am I right that it does not even have a sd card
slot which is externally accessible?
In my Kobo Clara HD there is a 128GB uSD now...
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1>;
> + disable-over-current;
> + status = "okay";
> +};
> --
> 2.23.0
Regards,
Andreas
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] only message in thread