Re: [PATCH] ASoC: dt-bindings: stm32: convert sai to json-schema

[Rob Herring <robh@kernel.org>]

On Thu, Jan 30, 2020 at 02:50:40PM +0100, Olivier Moysan wrote:
> Convert the STM32 SAI bindings to DT schema format using json-schema.
> 
> Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
> ---
>  .../bindings/sound/st,stm32-sai.txt           | 107 ----------
>  .../bindings/sound/st,stm32-sai.yaml          | 193 ++++++++++++++++++
>  2 files changed, 193 insertions(+), 107 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml


> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> new file mode 100644
> index 000000000000..33dca007fc86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -0,0 +1,193 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 Serial Audio Interface (SAI)
> +
> +maintainers:
> +  - Olivier Moysan <olivier.moysan@st.com>
> +
> +description:
> +  The SAI interface (Serial Audio Interface) offers a wide set of audio
> +  protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
> +  The SAI contains two independent audio sub-blocks. Each sub-block has
> +  its own clock generator and I/O lines controller.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - st,stm32f4-sai
> +      - st,stm32h7-sai
> +
> +  reg:
> +    items:
> +      - description: Base address and size of SAI common register set.
> +      - description: Base address and size of SAI identification register set.
> +    minItems: 1
> +    maxItems: 2
> +
> +  ranges:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  clocks:
> +    items:
> +      - description: pclk feeds the peripheral bus interface.
> +      - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
> +      - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
> +
> +  clock-names:
> +    items:
> +      enum: [ pclk, x8k, x11k ]
> +    minItems: 3
> +    maxItems: 3
> +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +
> +patternProperties:
> +  "^audio-controller@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Two subnodes corresponding to SAI sub-block instances A et B
> +      can be defined. Subnode can be omitted for unsused sub-block.
> +
> +    properties:
> +      compatible:
> +        description: Compatible for SAI sub-block A or B.
> +        enum:
> +          - st,stm32-sai-sub-a
> +          - st,stm32-sai-sub-b

pattern: 'st,stm32-sai-sub-[ab]'

> +
> +      "#sound-dai-cells":
> +        const: 0
> +
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        items:
> +          - description: sai_ck clock feeding the internal clock generator.
> +          - description: MCLK clock from a SAI set as master clock provider.
> +        minItems: 1
> +        maxItems: 2
> +
> +      clock-names:
> +        items:
> +          - const: sai_ck
> +          - const: MCLK
> +        minItems: 1
> +        maxItems: 2
> +
> +      dmas:
> +        items:
> +          - description: SAI sub-block is configured as a capture DAI.
> +          - description: SAI sub-block is configured as a playback DAI.
> +        minItems: 1
> +        maxItems: 1

This is defining that dmas has 2 entries, but then limits it to the 1st 
entry only.

> +
> +      dma-names:
> +        items:
> +          - enum: [ rx, tx ]
> +
> +      st,sync:
> +        description:
> +          Configure the SAI sub-block as slave of another SAI sub-block.
> +          By default SAI sub-block is in asynchronous mode.
> +          Must contain the phandle and index of the SAI sub-block providing
> +          the synchronization.
> +        allOf:
> +          - $ref: /schemas/types.yaml#definitions/phandle-array
> +          - maxItems: 1
> +
> +      st,iec60958:
> +        description:
> +          If set, support S/PDIF IEC6958 protocol for playback.
> +          IEC60958 protocol is not available for capture.
> +          By default, custom protocol is assumed, meaning that protocol is
> +          configured according to protocol defined in related DAI link node,
> +          such as i2s, left justified, right justified, dsp and pdm protocols.
> +        allOf:
> +          - $ref: /schemas/types.yaml#definitions/flag
> +
> +      "#clock-cells":
> +        description: Configure the SAI device as master clock provider.
> +        const: 0
> +
> +    required:
> +      - compatible
> +      - "#sound-dai-cells"
> +      - reg
> +      - clocks
> +      - clock-names
> +      - dmas
> +      - dma-names

       additionalProperties: false.

> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: st,stm32f4-sai
> +
> +  - then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 2
> +
> +        clock-names:
> +          items:
> +            enum: [ x8k, x11k ]

Define the order.

> +          minItems: 2
> +          maxItems: 2
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    sai1: sai@4400a000 {
> +      compatible = "st,stm32h7-sai";
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges = <0 0x4400a000 0x400>;
> +      reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
> +      interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
> +      clock-names = "pclk", "x8k", "x11k";
> +      resets = <&rcc SAI1_R>;
> +
> +      sai1a: audio-controller@4400a004 {
> +        compatible = "st,stm32-sai-sub-a";
> +        #sound-dai-cells = <0>;
> +        reg = <0x4 0x1c>;
> +        clocks = <&rcc SAI1_K>;
> +        clock-names = "sai_ck";
> +        dmas = <&dmamux1 87 0x400 0x01>;
> +        dma-names = "tx";
> +      };
> +    };
> +
> +...
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel